Skip to content
Tutorials Center
My learning

Topics

Lesson 23 of 38 Β· Layers, Blocks and Annotation

AutoCAD Text, MText, Text Styles and Multileaders

Add notes to AutoCAD drawings with TEXT and MTEXT, set text styles and heights for each plot scale, use special symbols, build multileaders and tables, and fix common text problems.

Drawings communicate with words as well as lines: room names, notes, material callouts, titles. AutoCAD offers single-line text, multiline text, leaders and tables, all controlled by text styles. The one question that trips up most beginners is how tall should the text be? The answer depends on the plot scale, and this lesson shows the rule.

AutoCAD cannot run on this site, so the commands are described as they behave in the program, and the runnable parts are labelled JavaScript stand-ins.

Text styles

Run STYLE (alias ST) to open the Text Style dialog. A style combines:

  • Font (a TrueType font such as Arial, or an SHX font such as simplex.shx or romans.shx).
  • Height. Leave it at 0 and AutoCAD asks for the height each time you create text; a non-zero value fixes it, which also freezes it for dimensions.
  • Width factor, oblique angle, upside down / backwards effects.
  • Annotative, which makes the text size follow the layout scale automatically (see viewport scale).

Create separate styles for notes, titles and dimensions, then make one current from the Annotation panel's text style drop-down. Never use a font that your recipient lacks; the file falls back to a substitute and the layout can change. Use common fonts or embed what you need.

Single-line text: TEXT

TEXT (alias DT) creates one line at a time. You are prompted for the start point (or the justification option J), the height and the rotation angle, and then you type. Pressing Enter at the end of a line starts a new line below it, but each line is an independent object. Use it for short labels and for text that should never wrap.

Justification options (TL, TC, MC, BL, BR and others) decide which part of the text sits on the insertion point; MC (middle center) is handy for labels inside shapes.

Multiline text: MTEXT

MTEXT (aliases T and MT) asks for two corners of a rectangle, then opens the Text Editor ribbon tab with an in-place box. One object can hold paragraphs, bullets, numbering, columns, tabs, stacked fractions and mixed formatting. Highlights:

  • Stack a fraction by typing 1/2 and pressing Space or Enter when prompted, or use 1^2 for a stacked superscript.
  • Use Insert > Symbol for ΓΈ, Β°, Β± or type the codes %%c, %%d, %%p in single-line text (%%c25 shows the diameter symbol followed by 25).
  • Set Background mask to hide the lines behind text.
  • Insert Fields (see attributes and fields).
JS Stand-in: expand %% codes the way TEXT does

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Choosing the right text height

Text must look the same size on paper regardless of the drawing scale. A common plotted height is 2.5 mm for notes, 3.5 mm for headings, 5 mm for titles. Because model space is drawn at full size (1:1), the model text height is:

TEXT
model height = plotted height x scale denominator

At 1:50, a 2.5 mm note needs a model height of 125. At 1:100, 250. Layouts avoid this arithmetic if you use annotative text, but you still need to understand it when text appears microscopic or huge.

JS Stand-in: text height calculator

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Editing text

  • Double-click text to edit it in place (TEXTEDIT), or use Properties (Ctrl+1) for height, rotation and style.
  • SCALETEXT rescales text around chosen points without moving it; JUSTIFYTEXT changes alignment without moving it.
  • TXT2MTXT combines several single-line texts into one MText object.
  • FIND finds and replaces words across the drawing; SPELL checks spelling.
  • TEXTTOFRONT and DRAWORDER bring text above hatches so it stays readable.
  • If text shows as ?????, the font is missing. Change the style's font.
  • Text that appears as boxes in a plot usually has the wrong font or a damaged style.

Multileaders

A leader links a note to a feature with a line and an arrowhead. MLEADER (alias MLD) asks for the arrowhead point, the landing, and then opens the text editor for the note. A multileader style (MLEADERSTYLE) controls the line type, arrowhead, text style, landing and whether the content is text or a block (for a numbered balloon). Tools: MLEADEREDIT adds or removes leader lines, MLEADERALIGN aligns several leaders, and MLEADERCOLLECT collects balloon leaders into one. Grips move the arrowhead and text independently.

An older QLEADER and the LEADER command still work and are used when opening old files, but new drawings should use multileaders.

Tables

TABLE creates a grid object. In the dialog you choose a table style (TABLESTYLE), the number of columns and rows, then place it. Click a cell to type, drag grips to resize, and use the contextual ribbon to merge cells, set formulas (=SUM(B2:B5)) or link a table to a data extraction. A schedule produced by DATAEXTRACTION (see attributes) uses the same table object.

Common mistakes

  • Typing text at height 2.5 in model space of a 1:50 drawing, then wondering where it went.
  • Using many one-word text objects instead of one MTEXT with paragraphs.
  • Using a style with a fixed height and trying to change the height at the prompt.
  • Moving text with the wrong object snap and losing alignment; use JUSTIFYTEXT or grips.
  • Putting text on the same layer as hatch or walls, so freezing one hides the other. Use an annotation layer such as A-ANNO-TEXT.
  • Copying text from a Word file and carrying hidden formatting; paste as unformatted text.

Check your understanding

Quick check Β· 5 questions

of 5 answered You scored / 5 Β· perfect!

  1. 1. A drawing is made at 1:100 and notes must plot 2.5 mm tall. What model-space text height do you use?

    Model height = plotted height x scale denominator = 2.5 x 100 = 250 drawing units (here millimeters).
  2. 2. Which command creates one object that can contain paragraphs, bullets and columns?

    MTEXT creates multiline text. TEXT makes one independent line at a time.
  3. 3. What does setting a text style's height to 0 do?

    A zero height keeps the style flexible, so the TEXT command asks for the height.
  4. 4. Which typed code produces the diameter symbol in single-line text?

    %%c gives the diameter symbol, %%d the degree symbol and %%p the plus/minus sign.
  5. 5. Which tool replaces older QLEADER for new drawings?

    Multileaders and multileader styles are the current annotation tools.

Summary

  • Text styles control font, height and annotative behavior; create separate ones for notes, titles and dimensions.
  • TEXT for short single lines, MTEXT for paragraphs and formatted notes.
  • Model text height = plotted height x scale denominator, unless the text is annotative.
  • Use MLEADER with styles for callouts and TABLE for schedules.
  • Put text on dedicated annotation layers and use fonts others can open.

Next: Hatches and gradients