Skip to content
Tutorials Center
My learning

Topics

Lesson 15 of 38 ยท Editing and Modify Tools

MOVE, COPY, ROTATE and SCALE in AutoCAD

Transform objects precisely in AutoCAD with MOVE, COPY, ROTATE and SCALE: base points, displacement, copy options, reference angle and reference scaling, plus the matrix math in Python.

Four commands do most of the editing in any drawing: MOVE, COPY, ROTATE and SCALE. They share a structure (select, pick a base point, give a second value) and they all depend on choosing the right base point. This lesson explains each, the reference options that handle "make it match this", and the underlying transforms.

The common pattern

  1. Run the command (M, CO, RO, SC) and select objects, then press Enter.
  2. Specify base point. This is the "handle": the point on the objects that you are holding.
  3. Specify second point (or angle, or scale factor): where the handle goes.

Choosing a smart base point (an endpoint, centre or insertion point) lets you place objects by snapping the same feature to a target. Pick a base point that has meaning, never an arbitrary spot.

MOVE

M, select, Enter, base point, then the second point. Ways to give the displacement:

  • Snap to a point: base on a corner, second on the target corner.
  • Relative: type @500,0 as the second point.
  • Direct distance: with Polar on, move the cursor right and type 500.
  • Displacement (D): at the base point prompt, type D, then type 500,0 once. AutoCAD treats this as the vector itself.

COPY

CO (the alias for COPY; in some versions CP too) works like MOVE but leaves the original. Key options:

  • Multiple mode is the default in current versions: keep picking second points to make as many copies as you like; Enter ends the command. Type O for Mode > Single if you need just one copy.
  • Array (A) inside COPY: after the first copy, type A and give a number of items; AutoCAD fits that many copies along the displacement, optionally Fit between two points (a quick way to space things evenly).
  • Displacement works the same as MOVE.

Duplicating a window every 1500 mm along a wall: CO, pick window, base point, A, 5, then direct distance 1500.

ROTATE

RO, select, Enter, base point (the pivot), then the rotation angle. Positive angles are counter-clockwise. Options:

  • Copy (C): leaves the original and rotates a copy.
  • Reference (R): matches angles. Type R, then pick or type the current angle (two points defining the existing direction), then the new angle (two points or a value). Great for aligning a part with a skewed wall: pick the two ends of the wall as the reference, then type the target angle 0.

SCALE

SC, select, Enter, base point (the point that stays fixed), then a scale factor: 2 doubles, 0.5 halves, 1 does nothing. Options:

  • Copy (C): keep the original.
  • Reference (R): type the current length (pick two points) and the new length. Perfect for resizing an imported drawing or sketch to a known dimension: reference-scale a line to its real length and the rest follows.

Never scale a drawing to change its unit; if you must convert from inches to mm, scale by 25.4 and check a known dimension afterwards. Remember that scale changes the geometry, not just the display (unlike zoom).

Transform maths

Each command is a 2D transform around the base point. Move adds a vector, rotation applies a rotation matrix around the pivot, and scale multiplies distances from the base point. The stand-in below applies all three to the same square.

Python Stand-in: move, rotate and scale as transforms

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Notice that scaling about the corner (0,0) leaves that corner fixed, while scaling about the centre shrinks the square toward its middle. That is the importance of the base point.

Reference rotation and reference scale

The reference options are simple ratios: reference scale factor is new_length / reference_length; reference rotation angle is new_angle - reference_angle.

Python Stand-in: reference rotate and reference scale

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Dynamic previews and grips

When you use MOVE, COPY, ROTATE and SCALE the objects follow the cursor as a preview, so you can see the result before you click. You can also do quick moves with grips: select the objects, click a base grip (turns red, "hot"), then press Space or Enter to cycle through Stretch, Move, Rotate, Scale and Mirror modes. More in Grips, Properties and Match.

Tips

  • Use object snaps for both points; typing @ values is for known offsets.
  • With rotation, think of the base point as a pin in a board.
  • Use Ctrl+Z immediately if a transform looks wrong; check the selection count first.
  • After scaling something imported, run DIST on a known dimension to verify.

Common mistakes

  • Picking an arbitrary base point, so you cannot position the object exactly.
  • Scaling by the wrong factor (percent versus ratio: 50 percent is 0.5).
  • Using SCALE to fix a unit mismatch and forgetting that text and dimension sizes change too.
  • Rotating about the wrong point so objects swing away from the intended position.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What does the Reference option of ROTATE let you do?

    Reference rotation uses the existing angle and the desired angle, so you can align without computing the difference.
  2. 2. You SCALE by a factor of 0.5. What happens?

    Factors below 1 shrink; 0.5 halves every distance from the base point.
  3. 3. Which COPY option places a specified number of copies evenly?

    The Array option spaces N items along a displacement; Fit spaces them between two points.
  4. 4. A positive rotation angle is:

    By default positive angles are counter-clockwise.

Summary

  • MOVE, COPY, ROTATE and SCALE share the select, base point, second value pattern.
  • The base point is the handle (move), the pivot (rotate) or the fixed point (scale).
  • COPY can make multiple copies and arrays; ROTATE and SCALE both offer Copy and Reference.
  • Reference options compute the difference or ratio for you.
  • Verify results with DIST after scaling imported drawings.

Next: TRIM, EXTEND, FILLET and CHAMFER