Skip to content
Tutorials Center
My learning

Topics

Lesson 25 of 38 ยท Dimensions and Layouts

AutoCAD Dimension Commands: Linear, Aligned, Radius, Angular

Dimension AutoCAD drawings with DIM, DIMLINEAR, DIMALIGNED, DIMRADIUS, DIMDIAMETER, DIMANGULAR, baseline and continue chains, QDIM, and fix associativity and dimension edits.

Dimensions give the sizes a person needs to build the part or the building. AutoCAD measures the geometry for you, so a dimension is a live object: it reads the distance between the points you pick, and (when associative) updates when the geometry is stretched. Good dimensioning is about choosing what to dimension and keeping the drawing readable, not only about running commands.

AutoCAD cannot run on this site. The commands below are described as they behave in the program, and the runnable examples are clearly labelled JavaScript stand-ins that compute the same measurements.

The smart DIM command

Type DIM (Home > Annotation > Dimension). Hover over an object and AutoCAD picks the best dimension type: a line gets a linear or aligned dimension, a circle a diameter (or radius, by options), an arc a radius, two lines an angle. Click, then click again to place the dimension line. Options at the prompt include Angular, Baseline, Continue, Ordinate, Radius, Diameter, Arc length, Jogged, Align, Space, Break, Undo, and Layer. DIM is quick, but knowing the individual commands below helps when a result is not what you want.

Linear and aligned

  • DIMLINEAR (alias DLI) measures the horizontal or vertical distance between two points. Pick the two extension line origins (use object snaps), then drag to set the dimension line position. Options: Mtext, Text, Angle, Horizontal, Vertical, Rotated.
  • DIMALIGNED (DAL) measures the true distance between two points along the slanted line. Use it for sloped edges.
JS Stand-in: linear versus aligned dimension values

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Radius, diameter, arc, jogged

  • DIMRADIUS (DRA): click an arc or circle; text starts with R.
  • DIMDIAMETER (DDI): text starts with the diameter symbol. Use diameter for full circles, radius for arcs.
  • DIMARC: the length along an arc, with an arc symbol.
  • DIMJOGGED (DJO): a radius with a bent leader, for arcs whose center lies off the sheet.
  • DIMCENTER: places a center mark or centerlines (controlled by DIMCEN).

Angular

DIMANGULAR (DAN) measures the angle between two lines, at an arc, or at three points. Click the first line, the second line, then the arc position. The value is the angle on the side you place the dimension line.

JS Stand-in: angle between two lines, as DIMANGULAR reports it

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Chains: baseline, continue, ordinate

Many sets of dimensions share a pattern:

  • DIMBASELINE (DBA): starts every dimension from the same first extension line, stacked at a spacing controlled by DIMDLI. It continues from the last linear, angular or ordinate dimension (or pick one with the Select option).
  • DIMCONTINUE (DCO): starts each dimension where the last ended, forming a chain.
  • DIMSPACE: makes the spacing between parallel dimensions equal (enter 0 for auto, which aligns them).
  • DIMBREAK: breaks extension or dimension lines where they cross others.
  • DIMORDINATE (DOR): prints X or Y coordinates from a user-defined origin. It keeps drawings of plates and holes clean.
  • QDIM: select objects and quickly place a whole series (continuous, staggered, baseline, ordinate, radius, diameter).

Pick the right dimension

DIMLINEAR Horizontal or vertical
DIMALIGNED Along a slanted edge
DIMDIAMETER Full circles
DIMRADIUS Arcs and corners

One command per kind of measure.

1 / 2

Editing and maintaining dimensions

  • Select a dimension and use grips to move the text or the dimension line; the Properties palette shows its measurement, overrides and style.
  • DIMEDIT changes text or rotates extension lines (the Oblique option helps in isometric views); DIMTEDIT moves and rotates the text. Sizes such as text height and arrow size are style settings (see dimension styles).
  • DIMREASSOCIATE re-links a dimension to geometry; DIMDISASSOCIATE detaches it. The DIMASSOC variable controls whether new dimensions are associative (2 is the usual setting).
  • Never overwrite the dimension text by typing a number. An override that shows 1250 when the geometry is 1200 hides a mistake. Leave the measurement as it is, or use <> in the text to keep the real value with extra text, such as <> TYP.
  • DIMINSPECT adds an inspection frame and rate to a dimension for quality control.
  • Dimensions live on their own layer (for example A-ANNO-DIMS), so you can hide them to check the geometry.
  • Annotative dimensions scale with the viewport scale; non-annotative ones need DIMSCALE set correctly.

Dimensioning habits that make drawings usable

  1. Dimension once; do not repeat the same size.
  2. Place dimensions outside the part, with a small gap, and keep dimension lines from crossing.
  3. Dimension what controls manufacturing or building, from reference edges, not every visible length.
  4. Use OSNAP for every pick, so the dimension is exact.
  5. Check that the sum of a chain equals the overall dimension.

Common mistakes

  • Picking points without object snaps so the value is 1199.97.
  • Using aligned dimensions for horizontal lines, which is fine, but linear is cleaner and consistent.
  • Dimensioning in a drawing whose objects were scaled by SCALE so the numbers are wrong; always draw at 1:1.
  • Using EXPLODE on dimensions: they turn into lines and text, and no longer update.
  • Setting overrides on single dimensions instead of the style.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which command measures the true length of a slanted line?

    DIMALIGNED measures along the line between the two points. DIMLINEAR gives horizontal or vertical components.
  2. 2. Which command starts every new dimension from the first extension line?

    DIMBASELINE stacks dimensions from one common origin; DIMCONTINUE chains them end to end.
  3. 3. Why is typing a number over dimension text a bad habit?

    An overridden value no longer reflects the geometry and can mislead readers.
  4. 4. Which should you use for a full circle?

    Full circles are dimensioned by diameter; radius is for arcs and rounded corners.

Summary

  • DIM picks a dimension type automatically; specific commands give full control.
  • Use linear, aligned, radius, diameter, arc and angular dimensions for the geometry in front of you.
  • Baseline, continue, ordinate and QDIM speed up chains.
  • Keep dimensions associative, on a dedicated layer, and never overwrite the measured value.

Next: Dimension styles and tolerances