Skip to content
Tutorials Center
My learning

Topics

Lesson 38 of 38 ยท Projects and Practice

AutoCAD Practice: Command Quiz, Exercises and a Study Plan

Test your AutoCAD knowledge with command-to-alias drills, ten exercises with answers, a final multi-topic quiz and a practical study plan covering layers, blocks, dimensions, layouts, 3D and plotting.

Knowing commands and being fast with them are different skills. This final lesson gives you three kinds of practice: a drill that matches aliases to commands, ten exercises to do in AutoCAD with ways to check your own result, and a longer quiz that mixes everything from layers to plotting. It ends with a study plan for the weeks after the course.

AutoCAD cannot run on this site. The exercises are for you to do in the real program, and the runnable examples are clearly labelled stand-ins that quiz you and check numbers.

Drill: aliases and commands

The drill below is a random-free flash-card helper: it prints a question and the answer one step later. Change the list and make your own; the more cards you know without thinking, the less you reach for the ribbon.

JS Stand-in: alias flash cards (answers shown below each card)

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Ten exercises

Do each exercise in a fresh drawing from your template. Use the check described after each one.

  1. Layers. Create the eight layers A-WALL to G-VPORT with colors and lineweights, set A-WALL current, draw a rectangle, and use LAYISO on it. Check: LAYUNISO restores everything, and the status bar shows the layer name.
  2. Precision drawing. Draw a 100 x 60 rectangle starting at 50,50 using only keyboard coordinates. Check: LIST shows the corners at (50,50) and (150,110).
  3. Offset and trim. Draw a 6,000 x 4,000 room, offset 200 inward, trim the corners to make clean wall junctions. Check: AREA of the inner rectangle is 5,600 x 3,600 = 20,160,000 mm2.
  4. Block with attribute. Make a "pump tag" block (circle, number) with attribute TAG; insert it five times with different numbers. Check: DATAEXTRACTION lists five rows.
  5. Hatch. Hatch a polyline with an island using ANSI31 at a scale that looks right at 1:50. Check: the island stays empty (Normal detection), the pattern is not a solid fill.
  6. Dimension chain. Draw a bar with three stepped lengths, add DIMCONTINUE dimensions plus an overall dimension. Check: the chain sums equal the overall value.
  7. Layout. Create a layout with two viewports at 1:20 and 1:50 on the same model and lock them. Check: the properties palette shows the standard scales.
  8. 3D flange. Rebuild the flange from the mechanical project. Check: MASSPROP volume is about 154,300 mm3 (see the stand-in earlier).
  9. Script. Write a script that creates three layers and zooms to extents. Check: running it on an empty drawing shows the layers.
  10. Plot. Make a PDF of exercise 7 with a monochrome style. Check: open the PDF; the viewport border is missing and all lines are black.

Here is a helper for the area and mass checks:

JS Stand-in: check numbers for exercises 2, 3 and 8

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Final quiz

Quick check ยท 8 questions

of 8 answered You scored / 8 ยท perfect!

  1. 1. A dashed line looks continuous. What do you adjust first?

    Linetype scale controls the length of dashes and gaps.
  2. 2. Which command saves a block as its own DWG file?

    WBLOCK writes objects or a block to a file; BLOCK only defines it in the current drawing.
  3. 3. Which tab of the Dimension Style Manager sets the number of decimals?

    Primary Units sets format, precision, prefix, suffix and zero suppression.
  4. 4. In a layout, a 1:100 viewport is set with:

    1:100 is 0.01 times paper space.
  5. 5. Which command combines two solids into one?

    UNION merges solids; INTERSECT keeps the shared part.
  6. 6. Which unit does AutoLISP use for angles?

    AutoLISP angles are in radians.
  7. 7. Which tool packages a drawing with its xrefs and fonts?

    ETRANSMIT gathers dependent files into one package.
  8. 8. What is the correct plot scale for a layout?

    The layout is paper-sized, so plot it at 1:1.

A study plan

  • Week 1: set up a personal template (units, layers, text and dimension styles, title block). Repeat exercises 1 to 3 until you do them without thinking.
  • Week 2: redraw three real objects from your desk or home: a chair, a room, a bracket. Dimension them completely.
  • Week 3: blocks, attributes and a door schedule; two layouts with different scales.
  • Week 4: the 3D flange and one more part of your own; plot PDFs.
  • Ongoing: learn one new command a day and write down its alias; read your own acad.pgp; re-draw old projects faster.
  • Practice keyboard habits: left hand on the keyboard (Space repeats the last command, F3, F8, F10, Ctrl+Z), right hand on the mouse.
  • Join a community, share a drawing, and ask for a review of your layer names and line weights.

Summary

  • Practice with aliases, timed exercises and real objects to build speed.
  • Verify with LIST, AREA, DIST, MASSPROP and PDF previews, not by eye.
  • Keep a personal template and standards; they are the biggest time-savers.
  • Return to the AutoCAD track page for the other chapters.

Next: Back to the AutoCAD track