Skip to content
Tutorials Center
My learning

Topics

Lesson 19 of 38 ยท Editing and Modify Tools

Grips, the Properties Palette and Match Properties

Edit without commands using grips, change any object detail in the Properties palette and Quick Properties, copy formatting with MATCHPROP, and manage layers, colour, linetype and lineweight.

Besides running MOVE or STRETCH, you can edit objects directly: drag the grips (small squares and triangles) on a selected object, or type new values in the Properties palette. MATCHPROP copies properties from one object to others. These tools are quick for small adjustments, and the Properties palette is also the best way to see exactly what an object is. This lesson covers all three.

Grips

Select an object with nothing running and blue grips appear: at the endpoints and midpoint of a line, at the centre and quadrants of a circle, at vertices of a polyline.

  • Hover over a grip: a grip menu may appear (Stretch, Lengthen, Add Vertex, Remove Vertex, Convert to Arc, Radius, and so on, depending on the type).
  • Click a grip: it turns red (a hot grip) and the object is in Stretch mode. Move the cursor, then click or type a distance; direct distance and Polar Tracking apply.
  • With a hot grip, press Space or Enter to cycle the editing mode: Stretch, Move, Rotate, Scale, Mirror. Right-click shows the same options plus Base Point, Copy and Reference.
  • Ctrl while clicking a stretch grip creates a copy in Stretch mode; for Move mode Ctrl makes a copy and keeps going.
  • Shift+click several grips to make them all hot, and move them together.
  • A multifunctional grip on polyline segments lets you convert a line segment to an arc by dragging its midpoint.

The size and colours of grips are set in OPTIONS > Selection. Esc twice removes the selection and the grips.

Grips are fastest for one-off adjustments: dragging a wall end, resizing a circle, nudging text. For precision, type the distance rather than clicking by eye.

The Properties palette

Ctrl+1 or PROPERTIES toggles a dockable palette. With nothing selected it shows the drawing's general properties (current layer, colour, etc., which apply to new objects). Select an object and it displays that object's properties in categories:

Category Examples
General Colour, Layer, Linetype, Linetype scale, Lineweight, Transparency, Thickness
3D Visualization Material
Geometry Start X/Y/Z, End X/Y/Z, Delta, Length, Angle (line); Center, Radius, Diameter, Area, Circumference (circle)
Misc Text height, contents, style, justification

You can edit values directly: change a circle's radius to 50, type a new Y for a line end, set a polyline's elevation, change text height. With several objects selected, the dropdown at the top lets you pick one type or "All", and shows blank for properties that differ. The palette also has Quick Select and Toggle PICKADD buttons.

Quick Properties (QP or Ctrl+Shift+P) shows a smaller floating panel with the most useful properties near the object when you select it. It can be customised (CUI) to show only what you need.

Layer, colour, linetype, lineweight

Every object carries these properties, and they are set ByLayer by default: the object takes the value from its layer. The alternatives are ByBlock and an explicit value. Best practice: leave colour, linetype and lineweight ByLayer, and control the look through layers (Chapter 5). Explicit colours are sources of confusion later. Change the layer of selected objects with the layer drop-down in the Layers panel or in Properties.

LTSCALE sets the global linetype scale; dashes that look solid need a larger value (or a layer's/objects' own linetype scale). Lineweights display only when the Lineweight toggle is on in the status bar; they print as set regardless.

MATCHPROP (Match Properties)

MA. Copies properties from a source object to destination objects:

  1. Run MA.
  2. Select the source object.
  3. Select the destination objects (a window works); press Enter.

By default it matches colour, layer, linetype, linetype scale, lineweight, transparency, thickness, plot style, and for text, dimensions and hatches it matches style properties too. Type S (Settings) to switch individual properties off (for example, copy only the layer). It is the quickest way to fix objects drawn on the wrong layer: match them to one that is right.

Related: LAYMCH (Layer Match) changes the layer of selected objects to that of a chosen object; LAYMCUR changes the current layer to that of an object; LAYISO and LAYOFF isolate or hide layers.

Stand-in: Properties and MATCHPROP as data

An entity is a record of properties; matching copies a chosen set. This stand-in shows MATCHPROP with settings, and a Properties-style edit that recomputes a derived value (circle area).

Python Stand-in: MATCHPROP copies selected properties

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The linetype of circle1 is unchanged because linetype was switched off in settings, just like the Settings option of the real command.

Python Stand-in: editing a circle's radius in Properties

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Diameter, circumference and area are derived values, which is why they update immediately in the palette when you change the radius.

Workflow suggestions

  • Use grips for rough adjustments; the Properties palette for exact numbers.
  • To check an object's exact size, select it and read Properties; or use LIST for a text report on the command line.
  • Check the layer drop-down after selecting several objects: it shows *VARIES* if they are mixed.
  • Keep colour, linetype and lineweight ByLayer; fix strays with MATCHPROP or LAYMCH.

Common mistakes

  • Dragging a grip by accident (the object jumped): Ctrl+Z, then Esc.
  • Setting a colour by hand and wondering why it ignores layer changes.
  • Editing a property on the wrong selection because the palette was set to "All" with many types.
  • Forgetting Properties shows the current layer settings when nothing is selected, then drawing on the wrong layer.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. A grip turns red when you click it. What mode are you in?

    A selected, red grip is hot; the default mode is Stretch and Space cycles the modes.
  2. 2. How do you cycle between Stretch, Move, Rotate, Scale and Mirror with a hot grip?

    Space or Enter steps through the grip editing modes.
  3. 3. What does MATCHPROP do?

    It transfers layer, colour, linetype and other properties from the source.
  4. 4. What does ByLayer mean for an object's colour?

    ByLayer objects follow their layer's colour, so a layer change updates them.

Summary

  • Grips edit directly: click to heat, Space to cycle Stretch, Move, Rotate, Scale, Mirror.
  • The Properties palette (Ctrl+1) shows and edits exact values for any object.
  • Quick Properties is a compact floating version.
  • Keep colour, linetype and lineweight ByLayer; fix mismatches with MATCHPROP or LAYMCH.
  • You now have the full drawing and editing toolkit; Chapter 5 organises it with layers, blocks and annotation.

Next: AutoCAD Layers: Properties, Linetypes, Filters and States