Skip to content
Tutorials Center
My learning

Topics

Lesson 36 of 38 ยท Projects and Practice

AutoCAD Project: Draw an Apartment Floor Plan Step by Step

Build a complete apartment floor plan in AutoCAD: set units and layers, draw walls with OFFSET, cut openings, insert doors and furniture blocks, add room labels, dimensions and a layout sheet.

This project ties the course together. You will draw a one-bedroom apartment from empty file to printed sheet, using layers, blocks, text, hatches, dimensions and a layout. It follows the way professionals work: set up first, draw the structure, add detail, annotate, then plot.

AutoCAD cannot run on this site, so each step lists the commands and what to type, and the runnable examples are labelled JavaScript stand-ins that check your numbers (wall lengths, room areas, the door schedule) the way a calculator beside your screen would. Never trust a stand-in over the drawing: use AREA, LIST and DIST in AutoCAD to confirm.

The brief

  • Overall outside size: 9,000 mm x 6,000 mm. Walls 200 mm thick.
  • Rooms: living room and kitchen (open plan), bedroom, bathroom, entrance hall.
  • Two internal doors (900 mm), one front door (1,000 mm), three windows (1,200 mm).
  • Scale 1:50 on an A3 landscape sheet.

Step 1: set up the file

  1. Start from your metric template (acadiso.dwt) or a template you saved. Run UNITS: Type Decimal, Precision 0, Insertion scale Millimeters.
  2. LIMITS are optional; use ZOOM > All after drawing.
  3. Make layers (see layers): A-WALL (red, 0.50 mm), A-DOOR (cyan), A-WIND (blue), A-FURN (gray), A-ANNO-TEXT, A-ANNO-DIMS, A-HATCH, G-VPORT (non-plotting).
  4. Turn on Object Snap (F3), Polar Tracking (F10) and Ortho (F8) as needed. Dynamic Input (F12) helps with typing lengths.

Step 2: the walls

Draw the outer wall's centerline or the inner face? In architecture it is usually easiest to draw the outside rectangle and offset inward:

  1. Set layer A-WALL. RECTANGLE, first corner 0,0, other corner 9000,6000.
  2. OFFSET with distance 200, select the rectangle, click inside. You now have the outer and inner faces.
  3. Draw the interior partition faces with LINE and OFFSET: for a wall 200 mm thick starting 5,000 mm from the left, draw a line, offset it by 200, then TRIM where they cross the outer walls (use the Fence or Crossing options).
  4. Make every wall one object per run by JOIN; use FILLET with radius 0 to close corners cleanly. You can also create walls as thick polylines with PLINE, and PEDIT > Width when you want them filled.
JS Stand-in: areas of the main rooms (net of wall thickness)

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Step 3: openings

  • Doors: draw the opening gap. OFFSET a wall face by the distance to the door edge, TRIM the wall between the lines. Or make a door block (leaf and swing arc) with its base point at the hinge, and insert it on A-DOOR with INSERT, rotating to match the wall (see blocks). A dynamic block with a width parameter saves time.
  • Windows: trim the wall, then draw three parallel lines inside the opening, or insert a window block, on layer A-WIND.
  • Check with DIST: openings should read 900, 1,000 and 1,200.
JS Stand-in: door and window schedule with counts

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Step 4: furniture, hatching and text

  1. Insert furniture blocks (bed, sofa, table, kitchen units, sanitary fittings) on A-FURN. If you lack a library, draw simple rectangles and circles and make blocks.
  2. Hatch the wall faces: HATCH, pattern SOLID or ANSI31 at the scale for 1:50 on layer A-HATCH, then HATCHTOBACK (see hatches).
  3. Add room names with MTEXT on A-ANNO-TEXT: model height 125 mm for 2.5 mm plotted at 1:50 (see text). Add the area using a field that reads the room polyline's area.
  4. Use a multileader for notes such as "Kitchen island, 1,800 x 900".

Step 5: dimensions

Create a dimension style PLAN-50 (annotative or DIMSCALE 50): arrow 2.5 mm, text 2.5 mm, one decimal zero, extension line gap (see dimension styles). Place three tiers on layer A-ANNO-DIMS:

  1. Overall: 9,000 and 6,000 with DIMLINEAR.
  2. Wall to wall: a chain with DIMCONTINUE along the top.
  3. Openings: distances from wall corners to the window and door edges.

Check that each chain adds up to the overall dimension with DIST. Use DIMSPACE to equalize the tiers.

Step 6: the layout

  1. Click a layout tab and rename it A-101 Floor Plan. Set Page Setup: DWG To PDF.pc3, ISO A3 landscape, plot area Layout, scale 1:1, your plot style (see layouts and plotting).
  2. Insert the A3 title block at 0,0.
  3. MVIEW to create one viewport on G-VPORT, set the scale to 1:50, then lock it. At 1:50, 9,000 mm becomes 180 mm on paper, fitting on 420 mm wide A3.
  4. Fill in the title block fields, a north arrow (annotative block) and a scale bar.
  5. Preview and plot to PDF.
JS Stand-in: does the plan fit the A3 sheet at 1:50?

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Checklist before you finish

  • All lines are on named layers, objects are ByLayer.
  • No gaps at wall corners (use FILLET radius 0).
  • Hatch is behind text; text is readable at 1:50.
  • Dimensions are associative and add up.
  • Viewport locked at 1:50 and not plotting its border.
  • Drawing purged and saved; PDF opened and checked at 100% zoom.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which command quickly makes a parallel wall face 200 mm from an existing line?

    OFFSET makes a parallel copy at an exact distance; click on the side where it should go.
  2. 2. At 1:50, how long is a 9,000 mm wall on paper?

    9,000 / 50 = 180 mm.
  3. 3. Which model-space text height prints 2.5 mm tall at 1:50?

    Model height = plotted height x scale denominator = 2.5 x 50 = 125.
  4. 4. Why put room furniture on its own layer?

    Separate layers let you hide, lock or restyle furniture without touching walls.

Summary

  • Set units, layers and snaps first; build walls with RECTANGLE, OFFSET, TRIM and FILLET.
  • Use blocks for doors and furniture, HATCH for walls and MTEXT for labels at the correct height.
  • Dimension in three tiers and verify sums.
  • Finish in a layout at a locked 1:50 viewport and plot a PDF.

Next: Project: a mechanical part drawing