Skip to content
Tutorials Center
My learning

Topics

Lesson 17 of 38 ยท Editing and Modify Tools

OFFSET, MIRROR and Arrays in AutoCAD

Duplicate geometry intelligently: OFFSET parallel copies by distance or through a point, MIRROR with text control, rectangular, polar and path ARRAY, with the maths for each pattern.

Many drawings are repetitive: parallel walls, symmetric parts, rows of columns, bolt circles. Redrawing each item wastes time and risks error. OFFSET, MIRROR and ARRAY duplicate geometry exactly using rules. This lesson covers all three and the mathematics behind them.

OFFSET

O. Creates a parallel copy at a set distance. The prompt: Specify offset distance or [Through/Erase/Layer]:

  1. Type the distance (for example 200 for a 200 mm wall thickness), Enter.
  2. Click the object to offset.
  3. Click on the side where the copy should go.
  4. Repeat for more objects, or Enter to finish.

Behaviour by object:

  • Line: a parallel line of the same length.
  • Circle/arc: a concentric one with a larger or smaller radius (an offset inward larger than the radius fails).
  • Polyline/rectangle: the whole shape offsets as a unit, rounding or trimming corners; this is why drawing walls as a polyline is powerful. A closed rectangle offset inward gives a smaller rectangle.
  • Spline, ellipse: an approximating curve.

Options: Through (T) offsets through a point you pick (with a snap), Erase (E) deletes the source, Layer (L) decides whether the new object goes on the current layer or the source layer. Multiple (M) repeats on the same side. OFFSET fails ("Cannot offset") when the geometry would flip or collapse, or when the object is not planar to the current UCS.

MIRROR

MI. Creates a reflected copy across a line you define with two points (the mirror line). Steps: select objects, click the first and second point of the mirror axis, then answer Erase source objects? [Yes/No] <N>. Press Enter to keep the original (a copy) or Y to flip it.

Text mirroring: by default, text is not mirrored (it stays readable). The system variable MIRRTEXT controls it: 0 keeps text readable (default), 1 reverses it. Leave it at 0.

Mirror is perfect for symmetrical parts: draw one half and mirror the other. Use object snaps for the axis, or a temporary construction line, or an axis along a centre line.

ARRAY

AR (or the ARRAY drop-down) produces associative arrays: a single array object you can edit afterward by changing its parameters. Three types:

Type Command You specify
Rectangular ARRAYRECT rows, columns, row spacing, column spacing, optionally level (3D)
Polar ARRAYPOLAR centre point, number of items, fill angle, rotate items
Path ARRAYPATH a path curve, number of items or spacing, alignment

After you pick the type, a contextual Array Creation tab appears: change counts and distances and see the preview live. Editing: select the array and use grips or the Edit Array / Edit Source commands; Explode converts it to ordinary objects when you want independent copies. Associative controls whether the result stays one object or becomes independent copies.

Examples:

  • Rectangular: parking spaces, tiles, desks in rows. 4 rows by 6 columns spaced 2500 by 3000.
  • Polar: bolt circle: select a bolt hole, ARRAYPOLAR, centre = the flange centre, 8 items, fill 360, rotate items on. Eight holes, evenly spaced every 45 degrees.
  • Path: street lamps along a curved road: select a lamp, ARRAYPATH, pick the curve, set Divide or Measure.

Spacing sign matters: positive row spacing goes up, negative goes down; positive column spacing goes right, negative left. In a polar array the fill angle is positive counter-clockwise.

OFFSET geometry

For a line, the offset is a translation along the normal; for a circle only the radius changes; for a polyline each segment is offset and neighbouring segments are re-intersected at the new corners. The first stand-in offsets a line segment; the second finds the mirrored point.

Python Stand-in: OFFSET a line and a circle

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

MIRROR maths

Reflecting a point across the line through A and B: project onto the line, then go the same distance on the other side. Equivalent to 2 * foot - point, where foot is the foot of the perpendicular.

Python Stand-in: mirror points across a line

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

ARRAY maths

Python Stand-in: rectangular and polar array positions

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Which tool when

  • Parallel features (walls, clearance lines): OFFSET.
  • Symmetric shapes: draw half, MIRROR.
  • Regular patterns: ARRAY (rect, polar, path) instead of many copies.
  • Irregular spacing: COPY with several picks.

Common mistakes

  • Offsetting to the wrong side because the "side" click was on the wrong half.
  • Offsetting a set of separate lines and ending up with unjoined corners; use a polyline, or run FILLET radius 0 afterwards.
  • Getting mirrored (unreadable) text because MIRRTEXT was changed.
  • Making a polar array of 360 degrees with "number of items" confusion: items include the original.
  • Using negative spacing without realising its direction.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. You OFFSET a closed rectangle (a polyline) inward by 100. The result is:

    A polyline offsets as a unit and keeps its corners joined.
  2. 2. Which system variable controls whether MIRROR flips text?

    MIRRTEXT = 0 keeps text readable; 1 mirrors it.
  3. 3. How many holes does a polar array with 8 items and fill angle 360 produce, and at what spacing?

    360 / 8 = 45 degrees; the original counts as one of the 8.
  4. 4. What happens if you OFFSET a circle of radius 100 inward by 150?

    The inner radius would be below zero, so AutoCAD cannot offset.

Summary

  • OFFSET makes parallel or concentric copies; polylines offset as one shape.
  • MIRROR reflects across a two-point axis; MIRRTEXT keeps text readable.
  • ARRAY (rectangular, polar, path) creates associative patterns you can edit or explode.
  • The first item in an array counts as one; sign of spacing sets direction.

Next: STRETCH, BREAK, JOIN and EXPLODE