Skip to content
Tutorials Center
My learning

Topics

Lesson 31 of 38 ยท 3D Modelling

AutoCAD Boolean Operations: UNION, SUBTRACT, INTERSECT, SOLIDEDIT

Combine and cut 3D solids in AutoCAD with UNION, SUBTRACT, INTERSECT and SLICE, then refine with SOLIDEDIT, FILLETEDGE, SHELL, 3DMOVE, MASSPROP, INTERFERE and section planes.

Real parts are rarely a single primitive. A bracket is a plate with holes, a pocket and a boss; a building wall has openings. In AutoCAD you build such shapes by combining simple solids with Boolean operations, then fine-tune faces and edges. This lesson also covers measurement and the tools for cutting views out of a 3D model.

AutoCAD cannot run on this site. The commands are described as they behave in the program, and the runnable examples are labelled JavaScript stand-ins using axis-aligned boxes.

The three Booleans

Command Alias Result
UNION UNI Joins selected solids into one
SUBTRACT SU Removes the second set from the first
INTERSECT IN Keeps only the volume the solids share

SUBTRACT has an order: first select the solids you want to keep, press Enter, then select the solids to remove, press Enter. Typical use: a box (keep) minus a cylinder (remove) gives a plate with a hole. The tool solid disappears (DELOBJ controls whether the original profiles remain).

Tips:

  • Overlap the solids when subtracting. A cutting cylinder should extend beyond the surface; if its faces coincide with the box face, results may be messy.
  • Work with the Dynamic UCS and object snaps (such as Center) to place primitives exactly.
  • Booleans can also work on regions (2D), useful for closed-area calculations.
  • Use Properties to check that the final object is a 3D Solid, not a mesh or surface.
JS Stand-in: UNION, SUBTRACT and INTERSECT of two boxes

Press Run (or Ctrl + Enter) to see the console output here.

No output.

SLICE and other cutting tools

SLICE (SL) cuts a solid with a plane: pick the solids, then define the plane by 3 points, a Z axis, a surface, an object, or the XY/YZ/ZX planes. Keep both sides or just one. SECTIONPLANE places a live cutting plane to look inside (the model is not changed), and a Section Plane can be turned into 2D linework with Generate Section. For a 2D picture of a model, FLATSHOT projects the visible edges onto a block and VIEWBASE creates drawing views (base, projected, section and detail) on a layout, which update when the 3D model changes.

Moving, rotating and aligning

  • 3DMOVE, 3DROTATE and 3DSCALE show gizmos on the object: drag an axis arrow to move along X, Y or Z, an arc to rotate, or a handle to scale.
  • ALIGN and 3DALIGN map one to three source points onto three destination points, snapping a part into place.
  • MIRROR3D mirrors about a plane; 3DARRAY (3DARRAY) creates rectangular and polar copies in space; ARRAY also works in 3D with levels.
  • Use Z UCS rotation to rotate in other planes.

SOLIDEDIT and edge tools

SOLIDEDIT offers Face, Edge and Body editing:

  • Face > Extrude / Move / Rotate / Offset / Taper / Delete / Copy / Color: edit a face in place. Delete also removes fillets and holes.
  • Edge > Copy / Color, or the dedicated FILLETEDGE and CHAMFEREDGE commands to round or bevel edges.
  • Body > Shell: hollow a solid to a wall thickness, optionally removing a face to open it. Imprint stamps objects onto faces, Clean removes redundant edges, Separate splits non-touching volumes.
  • THICKEN turns a surface into a solid.
  • CONVTOSOLID and CONVTOSURFACE change types.
  • Taper faces and offset faces are how you change a wall thickness.

Some edits fail when the geometry is inconsistent. In that case run SOLIDCHECK or use AUDIT; for imported files, RECOVER can help.

Measuring a solid

MASSPROP reports volume, bounding box, centroid, moments of inertia and more, using the object's geometry. Multiply the volume by a material's density to get the mass. MEASUREGEOM gives distances, areas and volumes interactively. INTERFERE compares solids and lists overlaps, with the option to create the overlapping volume as a new solid: useful for checking an assembly. LIST shows object data; AREA measures faces.

JS Stand-in: mass of a drilled plate

Press Run (or Ctrl + Enter) to see the console output here.

No output.

A typical modelling sequence

flowchart LR
  A["Box for the base"] --> B["Cylinders for holes"]
  B --> C["SUBTRACT holes"]
  C --> D["UNION a boss"]
  D --> E["FILLETEDGE for edges"]
  E --> F["SHELL if hollow"]
  F --> G["MASSPROP and INTERFERE"]

Add and subtract simple shapes, then finish with edge and face edits.

Common mistakes

  • Selecting the tool solid first in SUBTRACT, which removes the part itself.
  • Cutting tools that exactly touch a face, leaving a thin skin or no cut.
  • Ignoring units: MASSPROP volume is in cubic drawing units.
  • Editing meshes with solid tools; convert them first.
  • Using EXPLODE on solids, which gives you surfaces and breaks the model.
  • Stacking tiny fillets before the main features are finished; add them last.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. In SUBTRACT, which solids do you select first?

    Select the solids to keep, press Enter, then pick the ones to subtract.
  2. 2. Which command keeps only the volume shared by two solids?

    INTERSECT leaves just the common volume. UNION merges, SUBTRACT removes.
  3. 3. Which command reports volume and centroid of a solid?

    MASSPROP lists mass properties including volume, bounding box, centroid and moments of inertia.
  4. 4. What does SECTIONPLANE do compared with SLICE?

    SECTIONPLANE is a view tool; SLICE actually modifies the geometry.

Summary

  • UNION, SUBTRACT and INTERSECT combine solids; select keepers first in SUBTRACT.
  • SLICE cuts, SECTIONPLANE, FLATSHOT and VIEWBASE produce views and sections.
  • SOLIDEDIT, FILLETEDGE, CHAMFEREDGE and SHELL refine faces and edges.
  • 3DMOVE, 3DROTATE, ALIGN position parts; MASSPROP and INTERFERE check them.

Next: Plotting and plot styles