Skip to content
Tutorials Center
My learning

Topics

Lesson 27 of 38 ยท Dimensions and Layouts

AutoCAD Model Space, Paper Space, Layouts and Title Blocks

Understand AutoCAD model space and paper space: create layouts, set paper size with Page Setup, add title blocks with fields, and use sheet sets to manage a drawing package.

AutoCAD gives you two places to work. Model space is where you draw the thing itself, full size, with no sheet in sight: a house is 12 meters wide, a shaft is 80 millimeters long. Paper space is where you lay out the sheet to print: the border, the title block, windows (viewports) onto the model, and the notes. Keeping the two separate means you never draw at a reduced scale. You draw at 1:1 and print at whatever scale the sheet needs.

AutoCAD cannot run on this site. The interface is described as it appears in the program, and the runnable examples are clearly labelled JavaScript stand-ins for sheet arithmetic.

The tabs at the bottom

Below the drawing area you see Model, Layout1 and Layout2. Click a tab to switch. In a layout, the white rectangle is the paper, a dotted line shows the printable area, and a rectangle with a frame is a viewport showing the model.

  • TILEMODE (1 = Model, 0 = Layout) is the underlying variable.
  • Right-click a tab: New Layout, From Template, Delete, Rename, Move or Copy, Page Setup Manager.
  • LAYOUT and LAYOUTWIZARD are command-line versions.
  • Use one layout per sheet: floor plan, sections, details, each on its own tab.

Inside a layout, you can work in paper space (outside viewports; objects like the title block live here) or through a viewport in model space (double-click inside it, or MSPACE/MS; double-click outside to return, or PSPACE/PS). The status bar shows PAPER or MODEL, and the viewport's border thickens when it is active. VPMAX and VPMIN maximize or restore a viewport while you work.

Page setup

Right-click a layout tab > Page Setup Manager > Modify (or PAGESETUP):

Setting Typical choice
Printer/plotter DWG To PDF.pc3 for PDF, or a system printer
Paper size ISO A1 (594 x 841 mm), A3 (297 x 420), ANSI D, ARCH E...
Plot area Layout
Plot scale 1:1 (the viewport carries the drawing scale, not the sheet)
Plot style table acad.ctb or a company .ctb/.stb (see plotting)
Orientation Landscape or portrait
Options Plot object lineweights, plot with plot styles, plot paper space last

Save the setup as a named page setup and import it into other drawings, so every sheet shares it.

JS Stand-in: ISO paper sizes and the sheet-to-model ratio

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Title blocks

A title block is the frame with the project name, drawing number, scale, date, drawn by, and revision table. It is built once and reused:

  1. Draw the border and title block on layer 0 or a title block layer, at a 1:1 paper size (for example 841 x 594 mm for A1).
  2. Add attributes (see attributes) for the project name, sheet number and so on.
  3. Make a block and save it as A1-border.dwg with WBLOCK.
  4. In each layout, INSERT it at 0,0 with scale 1, on a layer such as G-TITLE.
  5. Use fields for the file name, sheet number and the number of sheets, so they update automatically.

Put the title block in the layout, never in model space.

Sheet sets

For a project with dozens of sheets, the Sheet Set Manager (SHEETSET, Ctrl+4) organizes layouts from many drawings into one list. You can open any sheet from the palette, publish the whole set to one PDF, and keep sheet numbers, titles, a sheet list table and revision data in sync with fields. Create one with Create Sheet Set (from an example set or existing drawings). It saves a .dst file that references the drawings; keep it with them when you move a project. Use SHEETSET if you manage ten or more sheets; for three, plain layouts are enough.

JS Stand-in: a sheet list with sequence numbers

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Layout workflow

flowchart LR
  M["Model space: draw 1:1"] --> L["Create layout tab"]
  L --> P["Page setup: paper, plotter, style"]
  P --> T["Insert title block"]
  T --> V["Add viewports and set scale"]
  V --> A["Add notes and dimensions"]
  A --> O["Plot or publish"]

Keep geometry in model space; sheets hold only the frame, viewports and sheet-only notes.

Common mistakes

  • Drawing the title block in model space and scaling it to the drawing.
  • Setting plot scale to 1:50 while the viewport is also 1:50, giving a drawing 50 times too small.
  • Typing text in paper space at model-scale heights.
  • Deleting the default layout and losing the page setup you needed.
  • Plotting the viewport border: put viewports on a layer with Plot turned off (for example G-VPORT).
  • Using the Model tab to print, which forces you to change scales manually each time.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Where should a building be drawn and at what size?

    Draw real-world geometry at full size in model space. The scale is set later in the viewport or plot.
  2. 2. What plot scale do you normally use for a layout?

    The sheet is already paper size, so you plot it at 1:1. The viewport carries the drawing scale.
  3. 3. How do you return from model space (inside a viewport) to paper space?

    Double-clicking outside the viewport activates paper space; PSPACE does the same.
  4. 4. What does the Sheet Set Manager help with?

    It lists sheets from many drawings, keeps numbering with fields, and publishes them together.

Summary

  • Model space holds the real-size drawing; layouts hold the sheets (paper space).
  • Set paper, plotter and plot style in Page Setup and plot the layout at 1:1.
  • Build title blocks with attributes and fields and insert them in each layout.
  • Use sheet sets for large projects.
  • Work in a viewport with MSPACE/PSPACE, and keep viewport borders on a non-plot layer.

Next: Viewports and drawing scale