Skip to content
Tutorials Center
My learning

Topics

Lesson 3 of 38 · Getting Started

Units, Prefixes and Scientific Notation for Waves

Master the units and SI prefixes used in wave physics: Hz, kHz, MHz, nm, ms and more, plus scientific notation and unit conversion with worked examples.

Wave physics spans enormous ranges of numbers. A sound wave might have a wavelength of 0.7 m, a green light wave one of 0.000 000 55 m, and a radio wave one of 3 m. A wave's frequency can be 2 Hz or 2 000 000 000 Hz. To handle such numbers without mistakes you need SI prefixes and scientific notation. This lesson gives you both, plus a method for converting units safely.

SI base and derived units you will use

Quantity Symbol Unit Unit symbol
Time, period t, T second s
Frequency f hertz Hz
Length, wavelength λ (lambda) metre m
Speed v metre per second m/s
Mass m kilogram kg
Force F newton N
Energy E joule J
Power P watt W

Notice that wavelength uses the Greek letter lambda, λ. Keep it distinct from the letter l.

SI prefixes

A prefix multiplies the unit by a power of ten.

Prefix Symbol Factor
giga G 10⁹
mega M 10⁶
kilo k 10³
(none) 10⁰ = 1
centi c 10⁻²
milli m 10⁻³
micro µ 10⁻⁶
nano n 10⁻⁹
pico p 10⁻¹²

So 5 MHz = 5 × 10⁶ Hz and 650 nm = 650 × 10⁻⁹ m = 6.5 × 10⁻⁷ m. Careful with capitals: mHz is millihertz, MHz is megahertz, a factor of 10⁹ apart.

Case matters. m means milli (10⁻³), M means mega (10⁶). The metre is also written m, so mm is a millimetre and Mm is a megametre.

Scientific notation

In scientific notation a number is written as a × 10ⁿ, where 1 ≤ a < 10 and n is an integer.

  • 340 m/s = 3.4 × 10² m/s
  • 0.0000005 m = 5 × 10⁻⁷ m
  • 300 000 000 m/s = 3 × 10⁸ m/s

To move the decimal point left by n places, add n to the exponent. Move it right and subtract. Scientific notation shows how big or small a number is at a glance and makes multiplication easy: multiply the front numbers and add the exponents.

Example: (2 × 10³)(4 × 10⁵) = 8 × 10⁸.

Converting units safely

Use this method:

  1. Write the value with its prefix as a power of ten.
  2. Divide or multiply by the target prefix factor.
  3. Check that the answer has a sensible size.

Worked example 1

Convert 2.4 GHz (a Wi-Fi band) to hertz.

2.4 GHz = 2.4 × 10⁹ Hz = 2 400 000 000 Hz.

Worked example 2

A light wave has wavelength 550 nm. Express it in metres and in micrometres.

In metres: 550 × 10⁻⁹ m = 5.5 × 10⁻⁷ m. In micrometres: 550 × 10⁻⁹ m ÷ 10⁻⁶ = 0.55 µm.

Worked example 3

A pulse lasts 25 ms. Express it in seconds.

25 ms = 25 × 10⁻³ s = 0.025 s.

A prefix helper in code

The next program converts any value with a prefix to base units and back. It is a calculator that applies the table above.

Python SI prefix converter

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The .3e format prints scientific notation, so you can see the exponent directly.

Checking whether an answer is sensible

A good habit: estimate the order of magnitude first. Typical sizes:

Thing Typical value
Speed of sound in air about 340 m/s
Speed of light in a vacuum 3.00 × 10⁸ m/s
Wavelength of visible light 400 nm to 700 nm
Audible sound wavelength roughly 1.7 cm to 17 m
Radio (FM) wavelength about 3 m

If you get a visible-light wavelength of 550 m, you probably forgot a factor of 10⁹.

Python Order-of-magnitude check

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. How many hertz is 3.5 kHz?

    kilo means 10³, so 3.5 kHz = 3.5 × 1000 Hz = 3500 Hz.
  2. 2. Write 650 nm in metres using scientific notation.

    650 nm = 650 × 10⁻⁹ m = 6.5 × 10² × 10⁻⁹ = 6.5 × 10⁻⁷ m.
  3. 3. What is the difference between mHz and MHz?

    Lower-case m is milli and capital M is mega. They differ by a factor of 10⁹.
  4. 4. Compute (3 × 10⁴) × (2 × 10⁻²).

    Multiply 3 × 2 = 6 and add exponents 4 + (−2) = 2, giving 6 × 10².

Summary

  • Wave quantities use seconds, hertz, metres, metres per second, joules and watts.
  • Prefixes (G, M, k, c, m, µ, n, p) multiply units by powers of ten; case matters.
  • Scientific notation is a × 10ⁿ with 1 ≤ a < 10.
  • Convert by writing the prefix as a power of ten, and check the order of magnitude of your answer.

Next: Using Python to Plot and Explore Waves