Skip to content
Tutorials Center
My learning

Topics

Lesson 13 of 38 · Wave Properties

Speed of Waves on a String

Find out what sets the speed of a wave on a stretched string: tension and mass per unit length. Use v = √(T/μ) in worked examples and a runnable calculator.

Tune a guitar and you tighten the string. The note goes up. Why? Because a tighter string carries waves faster. The speed of a transverse wave on a stretched string depends on only two things: how hard the string is pulled and how heavy it is for its length. This lesson gives you the formula and shows how it explains the pitch of stringed instruments.

The formula

Text
v = √(F / μ)
  • F is the tension in the string, in newtons (N). (Many books write T; we use F so it is not confused with the period.)
  • μ (mu) is the linear density, mass per unit length, in kg/m: μ = m / L.
  • v is the wave speed in m/s.

Check the units: N / (kg/m) = (kg·m/s²) / (kg/m) = m²/s², so the square root is m/s.

Why the formula makes sense

  • More tension means a faster wave. A taut string pulls its neighbours back to equilibrium harder, so disturbances spring along sooner.
  • More mass per metre means a slower wave. A heavier string has more inertia, so it responds more slowly.

The wave speed depends only on the string, not on the amplitude or frequency of the wave. A big pluck or a soft pluck sends waves at the same speed.

Worked examples

Example 1

A string of mass 5.0 g and length 1.25 m is stretched with a tension of 80 N. Find the wave speed.

μ = 0.0050 kg / 1.25 m = 0.0040 kg/m v = √(80 / 0.0040) = √20 000 = 141 m/s

Example 2

By what factor does the speed change if the tension is quadrupled?

v ∝ √F, so the speed doubles.

Example 3

A wave on a rope has speed 12 m/s and the rope has μ = 0.25 kg/m. What is the tension?

F = μ v² = 0.25 × 144 = 36 N.

Python String wave speed calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The ratio 1.414 is √2, as predicted.

A pulse takes time to run along a rope

If you know the speed, you can find how long a pulse takes to cross the string: t = L / v. For the string in Example 1, a pulse crosses 1.25 m in 1.25 / 141 ≈ 0.0089 s, under 9 ms. That is why you do not see a guitar string's wave as a slow-moving bump.

Sketching how speed varies

Python Speed against tension and against linear density

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Both curves are square-root curves: the speed grows slowly with tension and falls slowly as the string gets heavier.

Connection to musical instruments

A guitar's thick bass strings have a larger μ, so waves move slower and the string vibrates at lower frequencies. The thin treble strings have small μ and are tuned to high notes. Turning a tuning peg changes F, and therefore v, which changes the frequencies at which the string can vibrate, as you will see in the next lessons.

Reflection at the ends

A pulse on a string reflects when it hits an end. At a fixed end the pulse comes back inverted (upside down). At a free end it comes back the same way up. These reflections are the building blocks of standing waves in the lesson after next.

Try it with a rope: tie one end to a hook, flick a pulse, and watch the pulse return upside down. Tie a light ring to a pole so the end can slide freely, and the pulse returns upright.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A string has tension 100 N and linear density 0.010 kg/m. What is the wave speed?

    v = √(F/μ) = √(100/0.010) = √10 000 = 100 m/s.
  2. 2. If the tension in a string is quadrupled, the wave speed...

    v is proportional to √F, so four times the tension gives twice the speed.
  3. 3. Which string carries waves faster at the same tension?

    A smaller linear density μ gives a larger v = √(F/μ).
  4. 4. How does a pulse reflect from a fixed end of a string?

    At a fixed end the string cannot move, so the reflected pulse is inverted.

Summary

  • The speed of a wave on a string is v = √(F/μ), where F is tension and μ = m/L.
  • More tension speeds the wave; a heavier string slows it.
  • The speed does not depend on amplitude or frequency.
  • A pulse reflects inverted at a fixed end and upright at a free end.

Next: Superposition of Waves