Skip to content
Tutorials Center
My learning

Topics

Lesson 14 of 38 ยท Wave Properties

Superposition of Waves

Learn the principle of superposition: when waves meet, their displacements add. See constructive and destructive overlap of pulses with worked examples.

What happens when two waves meet? Do they bounce off each other like billiard balls? No. Waves pass straight through one another, and while they overlap, the medium simply does what both waves ask of it at once. This is the principle of superposition, one of the most useful ideas in the whole course. It explains echoes that do not disturb each other, noise-cancelling headphones, musical harmony and, later, interference and diffraction.

The principle

When two or more waves overlap at a point, the resultant displacement at that point is the sum of the individual displacements (taking direction into account):

Text
y_total = yโ‚ + yโ‚‚ + yโ‚ƒ + ...

After the waves have passed through each other, each continues exactly as before. The overlap is temporary.

This holds for most waves of everyday size. (It can fail for extremely intense waves, but that is beyond this course.)

Overlapping pulses

Imagine two pulses travelling toward each other on a rope.

  • Both pulses point up. When they overlap, the heights add. At the moment of perfect overlap the rope shows a pulse twice as high. This is constructive superposition.
  • One pulse up, one pulse down (same size). When they overlap, the displacements cancel and the rope is momentarily flat at that spot. This is destructive superposition. The energy has not vanished: it is in the motion of the rope, which is moving fastest at that instant.

After they pass, the two pulses reappear unchanged and continue.

Python Two pulses passing through each other (simulation)

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Thin coloured lines are the individual pulses; the thick black line is their sum. At t = 8 the pulses sit on top of each other: the black curve doubles in the left column and goes flat in the right column.

Continuous waves: in phase and out of phase

Two sine waves of the same frequency can be:

  • In phase: crests line up with crests. The sum has amplitude Aโ‚ + Aโ‚‚.
  • In antiphase (out of phase by half a cycle, ฯ€ radians): crests line up with troughs. The sum has amplitude |Aโ‚ โˆ’ Aโ‚‚|. If Aโ‚ = Aโ‚‚, the sum is zero everywhere.

In between, the amplitude of the sum is somewhere between those two limits.

Python In phase and in antiphase

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Phase difference

The phase difference ฮ”ฯ† tells how far one wave is ahead of another, measured in radians (or degrees). A full cycle is 2ฯ€ rad = 360ยฐ.

Phase difference Relationship Sum of equal-amplitude waves
0 in phase amplitude doubles
ฯ€/2 (90ยฐ) quarter cycle apart amplitude ร— โˆš2
ฯ€ (180ยฐ) antiphase zero
2ฯ€ (360ยฐ) in phase again amplitude doubles

A path difference of one whole wavelength gives ฮ”ฯ† = 2ฯ€, and a path difference of half a wavelength gives ฮ”ฯ† = ฯ€. You will use this connection in Chapter 7.

Applications

  • Noise-cancelling headphones record outside sound and play back a copy shifted by ฯ€, so the two sounds cancel destructively at your ear (it works best for steady low-frequency noise).
  • Musical chords are sums of waves at different frequencies. The ear separates them again.
  • Radio: many stations' waves cross the same space at once and your radio can still pick out one, because the waves superpose without destroying each other.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Two pulses of height +2 cm and +3 cm overlap exactly at a point. What is the displacement there?

    By superposition the displacements add: 2 + 3 = 5 cm.
  2. 2. What happens to two pulses after they have passed through each other?

    Waves pass through each other; the overlap is only temporary.
  3. 3. Two waves of equal amplitude A are exactly out of phase (ฯ€). What is the resultant amplitude?

    Crest meets trough everywhere, so the displacements cancel and the sum is zero.
  4. 4. What phase difference corresponds to a path difference of half a wavelength?

    Half a wavelength is half a cycle: 180ยฐ or ฯ€ radians.

Summary

  • Principle of superposition: the resultant displacement is the sum of the individual displacements.
  • Waves pass through each other and continue unchanged.
  • In phase gives constructive overlap; antiphase (ฯ€) gives destructive overlap.
  • A path difference of ฮป/2 corresponds to a phase difference of ฯ€.

Next: Standing Waves on Strings