Skip to content
Tutorials Center
My learning

Topics

Lesson 29 of 38 · Interference and Diffraction

Interference and Path Difference

Learn the principle of superposition, coherent sources, and how path difference decides constructive or destructive interference, with sound and light examples.

When two waves meet in the same place they do not bounce off each other. They simply add. Sometimes the result is a bigger wave, sometimes it is almost nothing, and sometimes it is something in between. This adding of waves is called interference, and it is the clearest evidence that light and sound really are waves.

In this lesson you will learn the rule for adding waves, the condition for a stable interference pattern, and how to decide whether a point is loud or quiet, bright or dark, using the path difference.

The principle of superposition

At every moment and every point, the displacement of the combined wave is the sum of the displacements of the individual waves.

y_total = y₁ + y₂

Displacements can be positive or negative, so waves can reinforce or cancel.

  • Constructive interference: crest meets crest (or trough meets trough). The waves are in phase, and the amplitude increases.
  • Destructive interference: crest meets trough. The waves are in antiphase (half a cycle apart), and the amplitude decreases, to zero if the amplitudes are equal.
Python Adding two waves with different phase differences

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The third panel shows two equal waves cancelling completely. The first shows an amplitude twice as large.

Coherent sources

To see a steady pattern, the two sources must be coherent: they must have the same frequency and a constant phase difference. If the phase difference drifted randomly (as it does for two separate light bulbs), the bright and dark places would move around so fast that you would only see a uniform glow.

Two common ways to get coherent sources:

  • Use one source and split its wave into two paths, for example with two narrow slits or a loudspeaker connected to two speakers.
  • Use a laser, whose light is already very coherent and very close to a single wavelength (monochromatic).

Path difference

For two coherent sources in phase, what happens at a point depends on how much farther the point is from one source than from the other. That difference in distance is the path difference:

path difference = |d₂ - d₁|

The path difference expressed in wavelengths is what matters, because one extra wavelength shifts a wave by one full cycle (back in phase).

Path difference Phase relationship Result
0, λ, 2λ, ... = nλ In phase Constructive (maximum)
λ/2, 3λ/2, ... = (n + ½)λ Antiphase Destructive (minimum)

where n = 0, 1, 2, ....

The rule assumes the two sources vibrate in phase. If the sources are in antiphase, the conditions swap: path differences of nλ give minima.

Worked example: two loudspeakers

Two loudspeakers emit the same 686 Hz tone in phase. Take the speed of sound as 343 m/s, so λ = 343 / 686 = 0.50 m. A listener is 3.0 m from one speaker and 4.0 m from the other.

  • Path difference = 1.0 m = 2λ. That is a whole number of wavelengths.
  • The waves arrive in phase, so the sound is loud there.

If the listener steps to a place 3.0 m from one and 3.25 m from the other, the path difference is 0.25 m = λ/2. Now the waves arrive in antiphase and the sound is quiet.

Python Constructive or destructive? Path difference classifier

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Energy is not destroyed

Where waves cancel, the energy does not vanish. It is redistributed to the places of constructive interference. Averaged over the whole pattern the total energy equals the sum of the energies from the two sources.

Noise-cancelling headphones

Noise-cancelling headphones use destructive interference. A microphone samples outside noise, and the electronics produce a sound wave of the opposite phase, played through the earpiece. The two waves largely cancel in your ear. It works best for steady, low-frequency sounds such as an engine hum, where the delay needed is easy to get right.

flowchart LR
    A["Outside noise<br/>(measured)"] --> B["Electronics invert<br/>the wave"]
    B --> C["Anti-noise played<br/>in earpiece"]
    A --> D["Noise reaches ear"]
    C --> E["Sum is much quieter"]
    D --> E

Antiphase sound added to noise leaves a smaller wave.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Two coherent sources in phase produce a minimum at a point. The path difference could be:

    Minima occur at path differences of (n + ½)λ, such as 0.5λ, 1.5λ, 2.5λ.
  2. 2. Which condition makes two sources coherent?

    Coherence means the phase difference between the sources stays constant, which requires the same frequency.
  3. 3. Two waves of equal amplitude A meet in antiphase. What is the resulting amplitude?

    Crest meets trough, so the displacements cancel at every instant.
  4. 4. Sources emit in phase with λ = 0.40 m. A point is 2.0 m from one and 2.8 m from the other. What is observed?

    The path difference is 0.8 m = 2λ, a whole number of wavelengths, so the waves reinforce.

Summary

  • Superposition: displacements add, y = y₁ + y₂.
  • Constructive interference: in phase; destructive: antiphase.
  • A steady pattern needs coherent sources (same frequency, constant phase difference).
  • For in-phase sources: maxima at path difference nλ, minima at (n + ½)λ.
  • Interference redistributes energy; it does not destroy it.

Next: Young's Double-Slit Experiment