Skip to content
Tutorials Center
My learning

Topics

Lesson 2 of 38 ยท Getting Started

Period, Frequency and Amplitude

Learn the three basic measurements of any oscillation or wave: period, frequency and amplitude, with units, the formula f = 1/T and worked examples.

To talk about a wave in numbers you need a few measurements. Three of them describe how a single point in the wave moves: how big the motion is (amplitude), how long one repeat takes (period) and how many repeats happen each second (frequency). They apply to a swinging pendulum, a vibrating guitar string and a pulsing light wave alike.

Oscillation and cycle

An oscillation is a repeated back-and-forth motion about a central position. One full cycle is one complete round trip: from a starting point, out to one extreme, back through the middle to the other extreme, and home again to where you began and heading the same way.

A child on a swing makes one cycle when she goes forward, swings back and returns to the starting position moving forward again.

Period T

The period, T, is the time taken for one complete cycle. Its SI unit is the second (s).

If a pendulum completes one swing cycle in 2.0 s, then T = 2.0 s.

Frequency f

The frequency, f, is the number of complete cycles per second. Its SI unit is the hertz (Hz), where:

1 Hz = 1 cycle per second = 1 sโปยน

Period and frequency are inverses of each other:

Text
f = 1 / T        T = 1 / f

If you know one, you know the other. A fast oscillation has a short period and a high frequency. A slow one has a long period and a low frequency.

Worked example 1

A string vibrates 440 times each second. Find the period.

T = 1 / f = 1 / 440 Hz = 0.00227 s (about 2.27 ms).

Worked example 2

A mass on a spring completes 12 cycles in 8.0 s. Find f and T.

f = 12 / 8.0 s = 1.5 Hz, then T = 1 / 1.5 = 0.67 s.

Amplitude A

The amplitude, A, is the maximum displacement of the oscillating point from its central (equilibrium) position. It is measured in metres for a position, or in whatever unit the quantity has (pascals for a pressure wave, for example).

Amplitude is not the distance from the lowest point to the highest point. That is the peak-to-peak value, which equals 2A.

Amplitude is linked to energy: for a given wave, doubling the amplitude makes the energy carried four times larger (energy is proportional to amplitude squared). A louder sound has a larger pressure amplitude; a brighter light has a larger electric-field amplitude.

Displacement and equilibrium

The equilibrium position is where the object would rest if it were not oscillating. Displacement, x, is the distance and direction from equilibrium at a given moment. If you measure upward as positive, a mass that is 3 cm below equilibrium has x = โˆ’3 cm. Displacement changes continuously; amplitude is the largest value that displacement reaches.

Measuring a frequency from data

Python Find period and frequency from a list of peak times

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The times here are invented sample data to practise the method. In a real experiment you would time many cycles and divide, which reduces the error in T.

Frequency ranges you may know

Source Typical frequency
Mains electricity (varies by country) 50 Hz or 60 Hz
Middle C on a piano about 262 Hz
Concert pitch A 440 Hz
Human hearing roughly 20 Hz to 20 000 Hz
FM radio about 88 MHz to 108 MHz

Plotting amplitude and period

A sine curve is the standard picture of a smooth oscillation. In the plot below, the highest point of the curve is the amplitude and the horizontal distance between two matching points is the period.

Python Displacement against time for two oscillations

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your reading: the orange curve (second) repeats twice as fast, so its frequency is double, while its peak is half as high, so its amplitude is half.

Common mistakes

  • Mixing period and frequency. Frequency is a rate (per second); period is a time (seconds). Convert with f = 1/T.
  • Calling peak-to-peak the amplitude. Amplitude is measured from equilibrium to a peak.
  • Forgetting units. 1 kHz = 1000 Hz and 1 ms = 0.001 s. Always convert prefixes before using the formulas.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. A wave source has period T = 0.050 s. What is its frequency?

    f = 1/T = 1/0.050 s = 20 Hz.
  2. 2. What is the amplitude of an oscillation?

    Amplitude is the greatest displacement measured from the equilibrium position. The lowest-to-highest distance is twice the amplitude.
  3. 3. A pendulum completes 30 cycles in 60 s. What is its period?

    T = total time / cycles = 60 s / 30 = 2 s.
  4. 4. Which unit is equivalent to one hertz?

    1 Hz = 1 cycle per second = 1 sโปยน.

Summary

  • One cycle is one full repeat of the motion.
  • Period T is the time for one cycle (seconds); frequency f is cycles per second (hertz); f = 1/T.
  • Amplitude A is the maximum displacement from equilibrium.
  • Displacement x is the signed distance from equilibrium at any moment.

Next: Units, Prefixes and Scientific Notation for Waves