Skip to content
Tutorials Center
My learning

Topics

Lesson 26 of 38 · Refraction and Lenses

Total Internal Reflection

Find out when light cannot leave a material, how to calculate the critical angle, and how total internal reflection powers prisms, diamonds and optical fibers.

When light goes from glass or water into air, it bends away from the normal. Make the angle of incidence larger and larger, and the refracted ray bends further and further, until it skims along the surface. Go beyond that point and something dramatic happens: the light does not leave at all. It reflects completely back inside. This is total internal reflection, often shortened to TIR.

TIR is the reason diamonds sparkle, why bicycle reflectors work, and how the internet reaches your home through glass fibers.

The critical angle

Take light going from a dense medium (index n₁) to a less dense one (n₂, with n₂ < n₁). Snell's law gives:

sin θ₂ = (n₁ / n₂) sin θ₁

Because n₁ / n₂ > 1, sin θ₂ reaches 1 (a refraction angle of 90°) before θ₁ reaches 90°. The angle of incidence at which this happens is the critical angle θc:

sin θc = n₂ / n₁

At θ₁ = θc the refracted ray runs along the boundary. For θ₁ > θc there is no solution for θ₂, so no light is transmitted and all of it is reflected, obeying i = r.

Two conditions for TIR

  1. The light must travel from a more optically dense medium to a less dense one (n₁ > n₂).
  2. The angle of incidence must be greater than the critical angle.

TIR can only happen inside the denser material. Light going from air into glass can never undergo TIR, because n₂/n₁ would be bigger than 1.

Worked examples

Water to air (n₁ = 1.33, n₂ = 1.00): sin θc = 1/1.33 = 0.752, so θc ≈ 48.8°.

Glass to air (n₁ = 1.50): sin θc = 1/1.50 = 0.667, so θc ≈ 41.8°.

Diamond to air (n₁ = 2.42): sin θc = 0.413, so θc ≈ 24.4°. A diamond's small critical angle traps light that enters, so the light bounces around inside many times before it escapes through the top, which gives the sparkle.

Python Critical angle calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Seeing TIR happen

For each incident angle, a ray in water either leaves into air (partly reflecting too) or is totally reflected. The program below traces six angles and says what happens.

Python Ray in water meeting the surface

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

At angles below θc a small fraction of the light is also reflected, so the surface of a pool seen from below looks partly like a mirror. Beyond θc the reflection is 100%.

Prisms and reflectors

A glass prism with angles 45°-45°-90° turns a ray through 90° or 180° using TIR. Light enters a short face along the normal (no bending), meets the long face at 45°, and since 45° > 41.8° it reflects completely. Binoculars and periscopes use such prisms because TIR is more reliable than silvered mirrors, which absorb a few percent and can tarnish.

flowchart LR
    A["Ray enters<br/>along normal"] --> B["Hits long face<br/>at 45°"]
    B --> C["45° > critical angle<br/>(41.8° for glass)"]
    C --> D["Total internal<br/>reflection, ray turns 90°"]

Why a 45°-45°-90° glass prism acts like a perfect mirror.

Optical fibers

An optical fiber is a thin strand of glass or plastic. The core has a slightly higher refractive index than the surrounding cladding. Light sent in at a shallow angle meets the core-cladding boundary at an angle larger than the critical angle and reflects again and again along the fiber, even round gentle bends. Long-distance communication, medical endoscopes and decorative lamps all use this.

For a core of n = 1.48 and cladding n = 1.46, sin θc = 1.46/1.48 = 0.9865, so θc ≈ 80.6°. That is a very large critical angle, which means only rays travelling nearly along the fiber are trapped. Fibers are therefore made very thin and kept fairly straight.

Real telecom fibers also suffer from absorption and pulse spreading (dispersion). TIR explains how the light is guided, not how far it can go.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Which condition is required for total internal reflection?

    TIR needs a dense-to-less-dense boundary and an angle of incidence greater than the critical angle.
  2. 2. What is the critical angle for glass (n = 1.50) to air?

    sin θc = 1/1.50 = 0.667, so θc ≈ 41.8°, about 42°.
  3. 3. A diamond has a smaller critical angle than glass. What effect does that have?

    A small critical angle means TIR happens at more incidence angles, so light bounces inside the stone many times.
  4. 4. Why does an optical fiber have a cladding with lower refractive index than the core?

    TIR needs light to go from higher n (core) to lower n (cladding).

Summary

  • TIR happens when light in a denser medium hits a boundary beyond the critical angle.
  • sin θc = n₂ / n₁, valid only if n₂ < n₁.
  • Critical angles: water 48.8°, glass 41.8°, diamond 24.4° (to air).
  • Uses: prisms in binoculars and periscopes, reflectors, diamond cutting, optical fibers.

Next: Thin Lenses and Ray Diagrams