Skip to content
Tutorials Center
My learning

Topics

Lesson 23 of 38 ยท Reflection and Mirrors

Curved Mirrors: Concave and Convex

Meet concave and convex mirrors, the principal axis, centre of curvature and focal point, and learn to draw ray diagrams that locate images.

A shaving mirror makes your face look bigger. A shop's security mirror shows a wide view of the aisle, but everything looks small. Both are curved mirrors, shaped like a piece of a sphere. One bends the surface inward, the other outward, and that single difference changes the image completely.

This lesson introduces the vocabulary of curved mirrors and teaches you to draw ray diagrams, the pencil-and-ruler way to find where an image forms.

Concave and convex

A concave mirror curves inward like the inside of a bowl; its reflecting surface faces the centre of the sphere. A convex mirror curves outward like the back of a spoon.

Key terms (all measured along the principal axis, the straight line through the middle of the mirror):

  • Pole (P): the centre of the mirror surface.
  • Centre of curvature (C): the centre of the sphere the mirror is cut from.
  • Radius of curvature (R): the distance from P to C.
  • Principal focus (F): the point where rays parallel to the axis meet (concave, real) or appear to come from (convex, virtual).
  • Focal length (f): the distance from P to F.

For a small mirror (one that is small compared with its radius):

f = R / 2

So the focus is halfway between the pole and the centre of curvature.

flowchart LR
    P["P<br/>pole"] --- F["F<br/>focus (f = R/2)"] --- C["C<br/>centre of curvature (R)"]

For a concave mirror, F and C lie in front of the mirror, with F halfway between P and C.

Rays parallel to the axis only meet at one point when the mirror is small compared with its radius. A large spherical mirror gives a blurred focus, called spherical aberration. Telescope mirrors are made parabolic to avoid it.

Three rays you can always draw

To find the image of a point on an object, draw two of these three rays from that point. Where they cross (or appear to cross) is the image of that point.

  1. A ray parallel to the axis reflects through F (concave) or looks as if it came from F (convex).
  2. A ray through F (or aimed at F) reflects parallel to the axis.
  3. A ray through C (or aimed at C) hits the mirror along the normal and reflects straight back on itself.

The reason for rule 3 is that a radius of a sphere is always perpendicular to its surface, so a ray along a radius meets the surface at 0ยฐ to the normal.

Images in a concave mirror

The image depends on where the object is. With object distance u and focal length f:

Object position Image position Image nature
Beyond C (u > 2f) Between F and C Real, inverted, smaller
At C (u = 2f) At C Real, inverted, same size
Between C and F Beyond C Real, inverted, larger
At F (u = f) At infinity Rays leave parallel, no image
Between F and P (u < f) Behind the mirror Virtual, upright, larger

The last row explains the shaving mirror: when your face is closer than the focal length you get a magnified, upright, virtual image.

Images in a convex mirror

For a convex mirror the focus is behind the mirror. Wherever you put a real object, the image is always:

  • Virtual (behind the mirror),
  • Upright,
  • Smaller than the object, and
  • Located between the pole and the focus.

Because the image is small, the mirror gathers light from a wide field of view. That is why convex mirrors are used as passenger-side mirrors, in shops and at blind road bends.

Python Which image do I get? A concave mirror classifier

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

You will learn where the formula 1/f = 1/u + 1/v comes from in the next lesson. For now, compare the output to the table above.

Why a concave mirror concentrates light

A concave mirror with the Sun in front of it sends nearly parallel sunlight to the focus, so all of the energy lands in a tiny spot. Solar cookers and some telescopes work this way. If you put a small bulb at F, the reflected beam is parallel instead, which is how a torch (flashlight) or car headlamp makes a straight beam.

Python Parallel rays meeting at the focus of a concave mirror

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Notice that the outer rays cross the axis slightly before F. That is spherical aberration, which was mentioned above.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. A concave mirror has a radius of curvature of 30 cm. What is its focal length?

    f = R / 2 = 30 cm / 2 = 15 cm.
  2. 2. Which ray reflects straight back along its own path?

    A ray along a radius meets the surface along the normal, so i = r = 0ยฐ and it retraces its path.
  3. 3. An object is placed between the pole and the focus of a concave mirror. The image is:

    Inside the focal length a concave mirror acts as a magnifier: the image is virtual, upright and enlarged.
  4. 4. Why are convex mirrors used as shop security mirrors?

    A convex mirror forms small, upright, virtual images and covers a wide field of view.

Summary

  • Concave mirrors curve inward and can form real or virtual images; convex mirrors curve outward and always form virtual, smaller, upright images.
  • Pole P, centre of curvature C, focus F; f = R / 2 for small mirrors.
  • Three ray rules: parallel through F, through F parallel, through C straight back.
  • A concave mirror shows a magnified virtual image when the object is closer than F.

Next: The Mirror Equation and Magnification