Skip to content
Tutorials Center
My learning

Topics

Lesson 15 of 38 ยท Wave Properties

Standing Waves on Strings

Understand standing waves: how two travelling waves make fixed nodes and antinodes, the harmonic frequencies f = nv/2L, and how guitar strings make notes.

Pluck a guitar string. A wave travels to each end, reflects (inverted, since the ends are fixed), and comes back. The returning wave overlaps the outgoing wave, and for certain frequencies the overlap forms a pattern that does not travel at all: it just vibrates in place. That is a standing wave (or stationary wave). Standing waves are how instruments choose their notes.

What makes a standing wave

A standing wave forms when two waves of the same frequency and amplitude travel in opposite directions in the same medium and superpose. They can come from one wave and its reflection.

The result:

  • Points that never move: nodes.
  • Points that vibrate with the biggest amplitude: antinodes.
  • Between two neighbouring nodes, all points oscillate in phase; across a node the phase flips by ฯ€.
  • The pattern does not carry energy along the string, unlike a travelling wave.
flowchart LR
    N1["Node<br/>(no motion)"] --- A1["Antinode<br/>(max motion)"] --- N2["Node"] --- A2["Antinode"] --- N3["Node"]

Nodes and antinodes alternate. The distance between neighbouring nodes is ฮป/2.

The distance between adjacent nodes (or adjacent antinodes) is half a wavelength.

Standing waves on a string fixed at both ends

The ends are fixed, so each end must be a node. Only waves that fit an exact number of half-wavelengths into the length L can exist:

Text
L = n (ฮป/2)       n = 1, 2, 3, ...
ฮปโ‚™ = 2L / n

Using v = fฮป, the allowed frequencies are

Text
fโ‚™ = n v / (2L) = n fโ‚
  • n = 1: the fundamental or first harmonic, fโ‚ = v / 2L. One loop (two nodes, one antinode).
  • n = 2: the second harmonic, 2fโ‚. Two loops.
  • n = 3: the third harmonic, 3fโ‚, and so on.

All harmonics are whole-number multiples of the fundamental. The mixture of harmonics and their strengths gives each instrument its tone quality, or timbre.

Worked example 1

A string 0.65 m long has a wave speed of 143 m/s. Find the fundamental frequency and the first three harmonics.

fโ‚ = 143 / (2 ร— 0.65) = 110 Hz. Then fโ‚‚ = 220 Hz, fโ‚ƒ = 330 Hz.

Worked example 2

A string with fโ‚ = 196 Hz is pressed so its vibrating length is shortened to 2/3 of the original length. What is the new fundamental?

f โˆ 1/L, so f = 196 ร— 3/2 = 294 Hz.

Python Harmonics of a fixed-fixed string

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Drawing the harmonics

Python The first four harmonics

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Count nodes: for the nth harmonic there are n + 1 nodes including the two ends, and n antinodes.

What sets the pitch of a string

Combine v = โˆš(F/ฮผ) with fโ‚ = v/2L:

Text
fโ‚ = (1 / 2L) โˆš(F / ฮผ)

So the fundamental frequency of a string is higher if the string is shorter (press a fret), tighter (turn the tuning peg) or lighter per metre (a thinner string). Doubling the length halves the frequency. (A guitar's fret positions follow from this: pressing at the 12th fret halves the vibrating length and raises the note by an octave.)

Python A string's fundamental from tension, density and length

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The last line is exactly double the fundamental for the full length, showing the octave.

Standing waves and resonance

Standing waves are resonances of the string. If you drive the string with a vibrator, large standing waves appear only when the driving frequency matches one of the harmonics fโ‚™. Away from those frequencies, the string barely moves. Standing waves also form in air columns (organ pipes, flutes), which you will study in the next chapter.

Travelling wave against standing wave

Feature Travelling wave Standing wave
Energy transfer Yes, along the medium No net transfer along the medium
Amplitude Same everywhere Varies from 0 (nodes) to maximum (antinodes)
Phase Changes steadily along the wave Same between nodes; flips across a node

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What is a node?

    A node is a point of zero amplitude in a standing wave.
  2. 2. A string of length 0.50 m is fixed at both ends and vibrates in its fundamental. What is the wavelength?

    For the fundamental L = ฮป/2, so ฮป = 2L = 1.0 m.
  3. 3. The fundamental frequency of a string is 200 Hz. What is the frequency of the third harmonic?

    Harmonics are integer multiples of the fundamental: 3 ร— 200 = 600 Hz.
  4. 4. What is the distance between two adjacent nodes in a standing wave of wavelength ฮป?

    Adjacent nodes are half a wavelength apart.

Summary

  • A standing wave is the superposition of two identical waves travelling in opposite directions; it has nodes and antinodes and carries no net energy along the medium.
  • For a string fixed at both ends, ฮปโ‚™ = 2L/n and fโ‚™ = nv/(2L).
  • Fundamental frequency rises with shorter length, higher tension and lower linear density.
  • Standing waves are resonances; driven at a harmonic, the string vibrates strongly.

Next: The Nature of Sound