Skip to content
Tutorials Center
My learning

Topics

Lesson 17 of 38 · Sound and Hearing

The Speed of Sound

Learn why sound travels at different speeds in gases, liquids and solids, how temperature changes it in air, and how to measure it with an echo or a thunderstorm.

Light seems instant, but sound takes its time. You see lightning first and hear thunder seconds later, and a starter's pistol at a distant race looks silent for a moment. How fast does sound travel? It depends on the medium, and in air it also depends on the temperature. This lesson gives you the numbers and the reasoning.

Typical speeds

Medium Speed of sound (approximate)
Air at 0 °C 331 m/s
Air at 20 °C 343 m/s
Fresh water (about 20 °C) 1480 m/s
Seawater about 1500 m/s
Steel (bulk, longitudinal) about 5900 m/s
Glass about 5000 m/s to 6000 m/s

These are textbook values. The exact numbers depend on temperature, pressure and the specific material. For problems, use the values your exam gives you; if none is given, 340 m/s for air is the common choice.

Why solids are faster than gases

A sound wave passes along by neighbouring particles pushing each other. Two things matter:

  • Stiffness (how strongly the particles spring back). Solids have strong bonds that restore particles quickly, so waves move fast.
  • Density (inertia). Heavier particles respond more slowly.

Roughly, wave speed rises with stiffness and falls with density. Solids are much stiffer than gases, which more than makes up for their higher density, so sound is fastest in solids, then liquids, then gases.

How temperature affects sound in air

In a warmer gas the molecules move faster, so they pass on disturbances sooner. A good approximation for air near room temperature is

Text
v ≈ 331 + 0.60 θ        (v in m/s, θ in °C)

Check: at 20 °C, v = 331 + 12 = 343 m/s. At 30 °C, v ≈ 349 m/s.

Another useful rule is that in an ideal gas, v ∝ √T where T is the absolute temperature in kelvin. Pressure changes alone do not change the speed of sound in an ideal gas, because the density changes too and the effects cancel.

Python Speed of sound in air against temperature

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The curves are nearly identical across everyday temperatures.

Worked examples

Example 1: thunder

You see lightning, and 6.0 s later you hear the thunder. Light arrives practically instantly. How far away was the strike?

d = v t = 343 × 6.0 = 2058 m ≈ 2.1 km. (A rough rule: about 3 seconds per kilometre.)

Example 2: a long pipe

A tap on one end of a steel rail 1000 m long is heard through the rail and, later, through the air. Find the time difference with v_steel = 5900 m/s and v_air = 343 m/s.

t_steel = 1000/5900 = 0.17 s, t_air = 1000/343 = 2.92 s; difference ≈ 2.75 s.

Python Time delay between sound in different media

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Measuring the speed of sound

Echo method. Stand a known distance d from a large wall and clap. Time the interval between a clap and its echo, repeat for several claps, and use v = 2d/t. Better: clap in rhythm with the returning echo and time many claps.

Two-microphone method. Place two microphones a known distance Δd apart along a line from a loudspeaker. A timer starts when the first microphone detects a click and stops when the second does. Then v = Δd / Δt.

Resonance tube method. Hold a vibrating tuning fork of known frequency over a tube partly filled with water. Adjust the water level until the air column resonates loudly. The first resonance occurs at about L ≈ λ/4, so λ ≈ 4L (plus a small end correction) and v = fλ. You will see why in the lesson on pipes.

Here is the analysis of the echo method with invented practice numbers.

Python Echo method analysis (practice data)

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Common mistakes

  • Using v = 340 m/s when a temperature is given: use the temperature formula or the value from the question.
  • Forgetting the factor of 2 in echo problems.
  • Thinking sound is faster in air because air is "lighter". It is slower: the stiffness of the medium matters more.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. In which medium does sound normally travel fastest?

    Solids are stiffer, so sound travels fastest in a solid such as steel. A vacuum carries no sound at all.
  2. 2. Using v ≈ 331 + 0.60θ, what is the speed of sound in air at 25 °C?

    v = 331 + 0.60 × 25 = 331 + 15 = 346 m/s.
  3. 3. You hear thunder 4.0 s after the lightning (v = 340 m/s). How far away was the strike?

    d = vt = 340 × 4.0 = 1360 m.
  4. 4. When air is warmed, the speed of sound...

    Faster-moving molecules pass on disturbances sooner, so the speed of sound rises with temperature.

Summary

  • Sound is slowest in gases (about 343 m/s in air at 20 °C), faster in liquids (about 1500 m/s in water) and fastest in solids (about 5900 m/s in steel).
  • In air, v ≈ 331 + 0.60θ (°C), equivalent to v ∝ √T in kelvin.
  • Echo and thunder problems use d = vt (and d = vt/2 for round trips).
  • Methods to measure v include the echo, two-microphone and resonance-tube methods.

Next: Intensity, Loudness and Decibels