Skip to content
Tutorials Center
My learning

Topics

Lesson 21 of 38 · Reflection and Mirrors

The Law of Reflection

Learn how light bounces off surfaces: the normal, angle of incidence, angle of reflection, and the difference between specular and diffuse reflection.

When you look in a mirror, you see yourself because light from your face bounces off the mirror and enters your eyes. When you look at a wall, you also see it because of reflected light, yet you cannot see yourself in it. Why the difference?

In this lesson you will meet the law of reflection, the simple rule that describes how a ray of light bounces from a surface. You will learn to measure angles correctly (a very common source of mistakes), and you will see why smooth and rough surfaces behave so differently.

Rays, surfaces and the normal

Physicists draw light as rays: straight lines with arrows that show the direction the light travels. A ray is a model, not a real thin beam, but it works very well for mirrors and lenses.

To describe a reflection you need three things:

  • The incident ray: the ray that arrives at the surface.
  • The reflected ray: the ray that leaves the surface.
  • The normal: an imaginary line drawn at 90° (perpendicular) to the surface, at the point where the ray hits.

Angles are always measured from the normal, not from the surface. The angle of incidence i is between the incident ray and the normal. The angle of reflection r is between the reflected ray and the normal.

flowchart LR
    A["Incident ray<br/>(angle i)"] --> B["Point of incidence<br/>on the mirror"]
    B --> C["Reflected ray<br/>(angle r)"]
    N["Normal<br/>(90° to surface)"] -.-> B

The normal is the reference line. Both angles are measured from it.

The two laws

The law of reflection has two parts:

  1. The angle of incidence equals the angle of reflection: i = r.
  2. The incident ray, the reflected ray and the normal all lie in the same plane.

The second part just says the reflected ray does not shoot sideways out of the page. For everyday problems, the first part is the one you use.

If a problem says "the ray hits the mirror at 30° to the surface", the angle of incidence is not 30°. The angle to the normal is 90° - 30° = 60°. Always convert first.

A worked example

A ray strikes a flat mirror and makes an angle of 25° with the normal. What is the angle between the incident ray and the reflected ray?

  • Angle of incidence i = 25°, so angle of reflection r = 25°.
  • The angle between the two rays is i + r = 50°.

If the same ray had made 25° with the mirror surface, then i = 65° and the angle between the rays would be 130°.

Reflection with vectors

You can calculate a reflection exactly. Let d be the direction of the incoming ray and n a unit vector along the normal. The reflected direction is:

r = d - 2 (d · n) n

This works because the component of d along the normal is flipped, and the component along the surface is kept. The program below applies the formula.

Python Reflect a ray with the vector formula

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Specular and diffuse reflection

A mirror, a calm lake and polished metal are smooth surfaces. Parallel rays that hit them leave as parallel rays, all obeying i = r. This is specular reflection and it forms clear images.

Paper, cloth, walls and the surface of a road are rough at a microscopic level. Each tiny patch has its own normal pointing in a slightly different direction. Every ray still obeys i = r for its own patch, but the reflected rays go everywhere. This is diffuse reflection. It is the reason you can see a non-shiny object from any direction, and also the reason it shows no mirror image.

Property Specular Diffuse
Surface Smooth Rough
Reflected rays Parallel, same direction Scattered in many directions
Image Clear image forms No clear image
Example Mirror, still water Paper, wall, clothing

Diffuse reflection does not break the law of reflection. The law holds at every tiny point; the roughness is what spreads the rays.

Drawing a reflection

To draw a reflection with a protractor:

  1. Draw the mirror line and mark the point where the ray hits.
  2. Use the protractor to draw the normal at 90° to the mirror.
  3. Measure the angle of incidence from the normal.
  4. Measure the same angle on the other side of the normal and draw the reflected ray.

The next program draws exactly this picture for any angle you choose.

Python Draw incident and reflected rays

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Change i_deg to 0. The ray now travels along the normal and bounces straight back. That is why a ray hitting a mirror head-on returns along its own path.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A ray hits a mirror and makes 35° with the mirror surface. What is the angle of incidence?

    Angles are measured from the normal. The normal is 90° from the surface, so i = 90° - 35° = 55°.
  2. 2. A ray has an angle of incidence of 20°. What is the angle between the incident and reflected rays?

    The angle of reflection is also 20°, so the two rays are 20° + 20° = 40° apart.
  3. 3. Why can you see a sheet of white paper from any direction but not see yourself in it?

    Diffuse reflection scatters rays everywhere, so the paper is visible from all sides, but the scattered rays cannot form a clear image.
  4. 4. Where is the normal drawn?

    The normal is a reference line perpendicular to the surface at the point where the ray strikes.

Summary

  • Light is modelled as straight rays; reflection happens at a surface.
  • Angles are measured from the normal, the line at 90° to the surface.
  • Law of reflection: i = r, and the incident ray, reflected ray and normal lie in one plane.
  • Vector form: r = d - 2 (d · n) n.
  • Smooth surfaces give specular reflection and images; rough surfaces give diffuse reflection.

Next: Images in Plane Mirrors