Skip to content
Tutorials Center
My learning

Topics

Lesson 16 of 38 ยท Sound and Hearing

The Nature of Sound

Learn how sound is made and travels: longitudinal pressure waves, compressions and rarefactions, why sound needs a medium, and the audible range.

You are surrounded by sound, yet sound is not a substance. It is a wave: a pattern of tiny pressure changes that travels through air (or water, or a solid) and reaches your ears. This lesson explains how sound is produced, what actually moves, and what range of frequencies you can hear.

How sound is made

Sound begins with a vibrating source: a speaker cone, a guitar body, a vocal cord, a tuning fork. When the source moves outward, it pushes the neighbouring air molecules together, creating a region of higher pressure, a compression. When it moves back, the air near it is thinned out, creating a region of lower pressure, a rarefaction.

These regions travel outward as a longitudinal wave: the air molecules oscillate back and forth along the direction of travel. They do not travel to your ear. Only the pressure pattern does.

flowchart LR
    S["Vibrating source"] --> C["Compression<br/>(high pressure)"]
    C --> R["Rarefaction<br/>(low pressure)"]
    R --> C2["Compression"]
    C2 --> E["Ear: eardrum vibrates"]

A sound wave is a sequence of compressions and rarefactions.

Sound waves can be described by displacement of the molecules or by pressure variation; the two graphs are a quarter cycle apart. Pressure is usually easier to measure with a microphone.

Sound needs a medium

Sound is mechanical, so it needs a medium. Ring a bell inside a sealed jar and pump out the air: the sound fades as the air thins. In the near-vacuum of space, there is no air to carry sound, so explosions in space would be silent. In water, sound travels well (whales communicate over long distances). In solids it travels even faster, which is why you can hear a train through the rail before you hear it through the air.

Frequency and pitch

The frequency of the sound wave equals the frequency of the source. Your brain interprets frequency as pitch: high frequency sounds high (a whistle), low frequency sounds low (a bass drum).

Typical human hearing range: about 20 Hz to 20 000 Hz (20 kHz). It shrinks with age, especially at the high end.

Name Frequency Examples
Infrasound below 20 Hz Earthquakes, some large animals
Audible sound 20 Hz to 20 kHz Speech, music
Ultrasound above 20 kHz Medical imaging (usually 1 to 20 MHz), bat calls, cleaning baths

Human speech lies mostly between about 100 Hz and a few kilohertz.

Wavelengths of audible sound

With v โ‰ˆ 343 m/s in air at 20 ยฐC, wavelengths follow from ฮป = v/f:

  • 20 Hz: ฮป = 17 m
  • 440 Hz: ฮป = 0.78 m
  • 20 kHz: ฮป = 0.017 m (1.7 cm)

Long bass waves bend around objects and walls easily; short treble waves are more directional. That is one reason why you hear the bass of a neighbour's music through a wall but not the treble.

Python Audible wavelengths in air

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Graphing pressure in a sound wave

A pure tone is a sine wave. The graph below shows pressure variation above and below normal atmospheric pressure at one point, for a 440 Hz tone (a simulation of the idea, with an exaggerated amplitude).

Python A pure tone: pressure against time

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Pressure changes in everyday sound are tiny compared with atmospheric pressure (about 101 000 Pa); a normal conversation changes it by well under 0.1 Pa.

Sound as energy

A sound wave transfers energy. The energy comes from the source and spreads out, which is why a sound gets quieter with distance. You will measure this with intensity and decibels in a later lesson.

Echoes and reflection

Sound reflects from hard surfaces. An echo is a reflected sound that you hear separately from the original. Your ear can separate two sounds if they arrive more than about 0.1 s apart, so you need a reflecting wall about 17 m away or more to hear a clear echo (sound travels 34 m there and back in 0.1 s at 340 m/s).

Sonar and ultrasound imaging use echoes to measure distances: d = v t / 2, with the factor of 2 because the pulse travels there and back. A pulse that returns after 0.50 s in water (v โ‰ˆ 1500 m/s) means a distance of 1500 ร— 0.50 / 2 = 375 m.

Python Echo distance calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What type of wave is sound in air?

    Air molecules oscillate along the direction of travel, forming compressions and rarefactions.
  2. 2. Why can sound not travel through a vacuum?

    Sound is a mechanical wave and needs a medium whose particles can pass on the vibration.
  3. 3. Which frequency is infrasound?

    Infrasound is below the human hearing range of about 20 Hz.
  4. 4. A sonar pulse returns after 0.20 s in water where v = 1500 m/s. How far is the object?

    d = vt/2 = 1500 ร— 0.20 / 2 = 150 m.

Summary

  • Sound is a longitudinal pressure wave made by a vibrating source; it needs a medium.
  • Compressions are high-pressure regions; rarefactions are low-pressure regions.
  • Human hearing covers about 20 Hz to 20 kHz; below is infrasound, above is ultrasound.
  • Echoes are reflections; distance to a reflector is d = vt/2.

Next: The Speed of Sound