Skip to content
Tutorials Center
My learning

Topics

Lesson 19 of 38 ยท Sound and Hearing

Pitch, Harmonics and Resonance in Pipes

Learn what pitch and timbre are, and how standing waves in open and closed air columns give the harmonics of flutes and organ pipes, with worked examples.

A flute, a recorder, an organ pipe and a bottle you blow across all make notes because air inside them resonates. The air column acts like a string: only certain standing waves fit, and those set the notes you hear. In this lesson you will connect standing waves to pitch, learn the difference between open and closed pipes, and calculate their harmonics.

Pitch and timbre

  • Pitch is how high or low a note sounds. It is determined mainly by the fundamental frequency.
  • Timbre (tone quality) is what lets you tell a violin from a flute playing the same note. It comes from the mixture of harmonics present and how strong each one is.
  • Loudness is linked to amplitude (intensity).

Two notes an octave apart have frequencies in the ratio 2:1. Middle A is 440 Hz; the A an octave higher is 880 Hz.

Standing waves in air columns

Sound waves reflect at the ends of a pipe, and the reflections superpose into standing waves. The rule for the ends:

  • At a closed end the air cannot move, so there is a displacement node (and a pressure antinode).
  • At an open end the air moves freely, so there is a displacement antinode (and a pressure node).

Standing waves have nodes and antinodes alternating, a quarter wavelength apart.

Open pipe (open at both ends)

Both ends are antinodes. The pipe length must hold a whole number of half-wavelengths:

Text
L = n (ฮป/2)       fโ‚™ = n v / (2L)       n = 1, 2, 3, ...

All harmonics are present (fโ‚, 2fโ‚, 3fโ‚, ...), as in a string.

Closed pipe (closed at one end)

One end is a node, the other an antinode. The pipe holds an odd number of quarter-wavelengths:

Text
L = (2n โˆ’ 1)(ฮป/4)      fโ‚™ = (2n โˆ’ 1) v / (4L)       n = 1, 2, 3, ...

So f = v/4L, 3v/4L, 5v/4L, ...: only odd harmonics (1st, 3rd, 5th...). For the same length, a closed pipe's fundamental is half that of an open pipe, an octave lower.

Pipe Fundamental Harmonics present
Open at both ends v / 2L all (1, 2, 3, ...)
Closed at one end v / 4L odd only (1, 3, 5, ...)
flowchart TB
    P["Air column"] --> O["Open-open<br/>antinode at both ends<br/>L = ฮป/2 for the fundamental"]
    P --> C["Closed-open<br/>node at closed end<br/>L = ฮป/4 for the fundamental"]

Where the nodes and antinodes sit fixes the allowed wavelengths.

Worked example 1

An open pipe is 0.50 m long. With v = 343 m/s find the first three harmonics.

fโ‚ = 343 / (2 ร— 0.50) = 343 Hz, fโ‚‚ = 686 Hz, fโ‚ƒ = 1029 Hz.

Worked example 2

A closed pipe is 0.17 m long. Find its fundamental and next resonance.

fโ‚ = 343 / (4 ร— 0.17) = 343 / 0.68 = 504 Hz; next: 3 fโ‚ = 1513 Hz.

Python Pipe harmonics calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Shapes of the standing waves

Python Displacement patterns in an open and a closed pipe

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

In the closed pipe (bottom row), every curve starts at zero (the closed end) and finishes at a maximum (the open end).

End correction

In real pipes the antinode sits slightly outside the open end, so the effective length is a little longer than the physical length. The extra length is about 0.6 r for a pipe of radius r (an approximation). In the resonance-tube experiment you can avoid the problem by measuring the difference between two successive resonance lengths, which equals ฮป/2: v = 2 f (Lโ‚‚ โˆ’ Lโ‚).

Worked example 3

A tuning fork of 512 Hz is held over a tube. Resonances occur at air-column lengths 16.5 cm and 49.5 cm. Find the speed of sound.

Lโ‚‚ โˆ’ Lโ‚ = 0.330 m = ฮป/2, so ฮป = 0.660 m and v = 512 ร— 0.660 = 338 m/s.

Python Resonance tube analysis

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The end correction comes out near zero here because the sample lengths were chosen to be exact multiples of a quarter wavelength; real data would show a small positive value.

Musical instruments

  • Woodwinds (flute, recorder, clarinet) change the effective length of the air column by opening holes; shorter column, higher pitch. A clarinet behaves roughly like a closed pipe, which is one reason it sounds different from a flute (roughly an open pipe).
  • Brass instruments use valves or slides to change tube length.
  • Strings change length by fingering and tension by tuning; bodies of instruments amplify through resonance.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. An open pipe of length 0.80 m has fundamental frequency (v = 340 m/s):

    fโ‚ = v/2L = 340/(2 ร— 0.80) = 212.5 โ‰ˆ 213 Hz.
  2. 2. Which harmonics are present in a pipe closed at one end?

    With a node at one end and an antinode at the other, only odd multiples of the fundamental fit.
  3. 3. A closed pipe and an open pipe have the same length. How do their fundamentals compare?

    Closed: v/4L; open: v/2L. The closed pipe is an octave lower.
  4. 4. What gives a musical instrument its characteristic timbre?

    Timbre is determined by which harmonics are present and how strong they are.

Summary

  • Pitch depends mainly on the fundamental frequency; timbre on the harmonic mix.
  • Open pipe: fโ‚™ = nv/2L, all harmonics. Closed pipe: fโ‚™ = (2nโˆ’1)v/4L, odd harmonics only.
  • Closed ends are displacement nodes; open ends are displacement antinodes.
  • The resonance-tube method gives v = 2f(Lโ‚‚ โˆ’ Lโ‚), which avoids the end correction.

Next: Beats and the Doppler Effect