Skip to content
Tutorials Center
My learning

Topics

Lesson 10 of 38 · Time Dilation and Length Contraction

Time Dilation and the Light Clock

Derive time dilation from the two postulates using a light clock and the Pythagorean theorem, learn proper time, and compute how much a moving clock lags behind.

Now we cash in the postulates. We will build the simplest possible clock, a pulse of light bouncing between two mirrors, and compare how it ticks for two observers. Using only the Pythagorean theorem and the constancy of c, we get the famous result: a moving clock runs slow.

The light clock

Two mirrors face each other, a distance d apart. A pulse of light bounces back and forth between them. One tick is one round trip: from the bottom mirror to the top and back.

In the clock's own rest frame, the light travels 2d in one tick at speed c:

Text
Δt₀ = 2d / c

This Δt₀ is the proper time between the two events "pulse leaves the bottom mirror" and "pulse returns to it": the time measured by a clock that is present at both events, i.e. at rest relative to them. Proper time is the shortest time any inertial observer will measure between those two events.

Watch the clock go by

Now let the light clock move at speed v past you, with the mirrors arranged perpendicular to the direction of motion (the pulse goes up and down while the clock slides sideways). Your frame is S; the clock's frame is S'.

In your frame the clock moves a distance v Δt during one tick, where Δt is your time for the tick. So the light travels along two slanted segments. Each segment has a vertical part d and a horizontal part v Δt / 2.

flowchart LR
    A["Bottom mirror<br/>start of tick"] -- "light path: half a tick" --> B["Top mirror<br/>clock moved vΔt / 2"]
    B -- "light path: other half" --> C["Bottom mirror<br/>end of tick, moved vΔt"]

Seen from the ground, the pulse zigzags along a longer path while the clock moves.

By the Pythagorean theorem, each slanted segment has length √(d² + (v Δt/2)²). By postulate 2, the pulse still moves at c in your frame. So the time for one slanted segment is half the tick:

Text
c (Δt / 2) = √(d² + (v Δt / 2)²)

Square both sides and collect the Δt terms:

Text
c² Δt² / 4 = d² + v² Δt² / 4
Δt² (c² − v²) = 4 d²
Δt = 2d / √(c² − v²) = (2d/c) / √(1 − v²/c²)

Since 2d/c = Δt₀:

Text
Δt = γ Δt₀        where  γ = 1 / √(1 − v²/c²)

Because γ ≥ 1, the moving clock's tick takes longer as measured in your frame: the moving clock runs slow. This is time dilation.

We used transverse motion so the mirror separation d is the same in both frames. Lengths perpendicular to the motion do not change. A short argument: if they did, two identical rods crossing each other perpendicular to their relative motion would each be measured shorter by the other, and one would have to end up with a bigger mark on the other, which both frames could check. Symmetry says no such mark can exist.

It is not special to light clocks

Any clock, whether it is a quartz watch, a decaying particle or your heartbeat, must agree with a light clock when both are at rest in the same frame. If it did not, the principle of relativity would let you tell which frame you are in. So all clocks, including biological processes, run slow by the same factor γ when moving.

Time dilation in numbers

The factor γ depends on β = v/c:

β γ A 1 s tick takes...
0.1 1.005 1.005 s
0.5 1.155 1.155 s
0.8 1.667 1.667 s
0.9 2.294 2.294 s
0.99 7.089 7.089 s
Python Moving-clock calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The jet's lag is only about 12.5 nanoseconds after ten hours of flight. That is why ordinary life never notices, but precision atomic clocks are good enough to detect effects of this size.

Both observers see the other's clock slow

Here is the part that confuses everyone at first. If I see your clock running slow, then by the principle of relativity you see mine running slow too. There is no contradiction, because the comparison involves different procedures: I compare your one clock against my two synchronized clocks at different places (the ones your clock passes), and you compare my one clock against your two. And as we saw, my synchronization differs from yours (relativity of simultaneity).

A single clock can only be compared fairly with a pair of clocks at different locations. This subtlety is the key to the twin paradox.

Experimental evidence

  • Muons. Cosmic-ray muons created high in the atmosphere reach the ground in numbers far larger than their lifetime (about 2.2 microseconds) would allow. The muon lesson works it out.
  • Atomic clocks on airplanes. In 1971, Hafele and Keating flew cesium clocks around the world on commercial airliners and compared them with clocks on the ground. The differences, on the order of tens to a hundred or so nanoseconds, were consistent with predictions that combine special relativity (speed) and general relativity (altitude). Later experiments with better clocks confirmed the results.
  • Particle accelerators. Unstable particles moving near c live far longer in the lab than at rest, by exactly γ.

A calculator for the light clock

The program below builds the slanted light path and confirms that the Pythagorean geometry gives γ.

JS Light clock geometry

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What does proper time between two events mean?

    Proper time is measured by a single clock that is at both events. It is the shortest time any inertial observer finds between them.
  2. 2. A clock moves at 0.6c. How long does one second of its proper time take in our frame?

    γ = 1/√(1 − 0.36) = 1/0.8 = 1.25, so 1 s of proper time is 1.25 s for us.
  3. 3. In the light-clock derivation, why does the pulse's path look longer to the ground observer?

    Both frames measure light at c, but the ground frame sees a longer zigzag path, so each tick takes more time.
  4. 4. Alice sees Bob's clock running slow. What does Bob see?

    By the principle of relativity the situation is symmetric: each sees the other's clock slow, using their own synchronized clocks.

Summary

  • A light clock ticks with Δt₀ = 2d/c in its rest frame; seen moving, its pulse zigzags, and the tick takes Δt = γ Δt₀.
  • γ = 1/√(1 − v²/c²); moving clocks run slow, by the same factor for any kind of clock.
  • Proper time is the time measured by a clock present at both events; it is the shortest.
  • The effect is mutual: each observer sees the other's clock slow, because comparisons use different synchronized clocks.
  • It is confirmed by muon lifetimes, airplane clocks and particle accelerators.

Next: The Lorentz Factor