Skip to content
Tutorials Center
My learning

Topics

Lesson 13 of 38 · Time Dilation and Length Contraction

Length Contraction

Derive length contraction L = L0/γ from time dilation, learn proper length, why only the direction of motion shrinks, and compute contracted lengths for rods and spacecraft.

Moving clocks run slow, and moving rulers get short. These are two sides of the same coin. In the muon story, the atmosphere was shorter in the muon's frame. This lesson defines what length means for a moving object, derives the contraction formula from time dilation, and explains what is and is not contracted.

Proper length

The proper length L₀ of an object is its length measured in the frame where the object is at rest. It is the ordinary length you would measure with a tape measure held against a stationary object. Proper length is the longest length any inertial observer will find for the object.

Length contraction concerns what other observers, who see the object moving, measure. To measure the length of a moving object we need a definite procedure: record the positions of its two ends at the same time in our frame, and subtract. We have seen that "the same time" depends on the frame, so the result will too.

Derivation from time dilation

Take a rod of proper length L₀ at rest in frame S', lying along the x' axis. Frame S' moves at speed v relative to S. An observer in S sits at a fixed point and watches the rod go by.

In S. The front of the rod passes the observer, and then the back passes at a later time. These two events happen at the same place in S, so a single clock in S measures the time between them. That is a proper time, which we call Δt₀. The rod moves at v, so its length in S is

Text
L = v Δt₀

In S'. The observer in S moves backward at speed v past the rod. The two events (front passes, back passes) happen at the two ends of the rod, separated by L₀, and take time

Text
Δt' = L₀ / v

in the rod's frame. But in S' the single clock of the S observer is moving, so its proper time Δt₀ is dilated: Δt' = γ Δt₀.

Put together: L₀/v = γ Δt₀ = γ L/v. Therefore

Text
L = L₀ / γ = L₀ √(1 − v²/c²)

A moving object is measured shorter along its direction of motion by the factor γ.

Derivations that "prove" contraction differently (such as the pole-and-barn analysis below) give the same result. The consistency across methods is a reassurance that the theory hangs together.

What contracts and what doesn't

  • Along the motion: contracted by 1/γ.
  • Perpendicular to the motion: unchanged. If it were not, two identical rods crossing at right angles could give contradictory observations, as discussed in the light clock lesson.
  • Proper length is invariant, in the sense that it is one fixed number defined in the rest frame.
  • The effect is mutual: if S sees objects of S' contracted, S' sees objects of S contracted. Again, different procedures.

Contraction is about measuring simultaneous positions of the ends. It is not that the atoms physically get squeezed in their own frame; nothing happens to the rod from its own point of view.

Numbers

Python Contracted length calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

At β = 0.6, a 100 m ship is measured to be exactly 80 m: γ = 1.25, and 100/1.25 = 80.

Seeing the contraction

Plot the shape of a moving rectangle: a square of side 1 m, moving along x at various speeds, shown as measured at the same time in S.

Python A moving square, measured simultaneously

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The height (perpendicular direction) stays 1 m; only the width shrinks.

This is the measured length, not the shape a camera would photograph. A camera collects light that left different parts of the object at different times, and the image can look rotated rather than squashed. Contraction concerns simultaneous positions in a frame, not photographs.

Distances in space travel

Length contraction also covers the space between objects. A trip between two stars at rest relative to each other has Earth-frame distance D. The crew, moving at v, measures the distance as D/γ. That is why crew time for the trip can be shorter than D/c: at β = 0.9 over D = 9 light-years, the Earth-frame trip is 10 years, while the crew measures 9/2.294 = 3.9 light-years and takes 3.9/0.9 = 4.36 years. Both frames explain the same crew clock reading: 10/γ = 4.36 years.

JS A crew's trip, two ways

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Two different routes to the same crew time: that is how you check that your relativity answer is coherent.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is proper length?

    Proper length is the rest-frame length, and it is the longest length any inertial observer measures.
  2. 2. A 100 m spacecraft moves past us at 0.8c. How long do we measure it?

    γ = 5/3, so L = 100 × 3/5 = 60 m.
  3. 3. Which dimension of a fast-moving cube is contracted?

    Only lengths parallel to the motion contract; perpendicular dimensions are unchanged.
  4. 4. Why are both clocks and rulers affected in a consistent way?

    The derivation uses time dilation: L = vΔt₀ with Δt' = γΔt₀ and Δt' = L₀/v, so L = L₀/γ.

Summary

  • Proper length L₀ is measured in the object's rest frame; other frames find L = L₀/γ along the direction of motion.
  • Derived from time dilation: a single clock timing the rod passing gives L = vΔt₀, and Δt' = L₀/v = γΔt₀.
  • Perpendicular dimensions do not change; the effect is mutual between frames.
  • Contraction is a measurement of simultaneous end positions, not a photograph.
  • Distances between stars are contracted for a fast crew, which agrees with time dilation seen from Earth.

Next: Length Contraction Paradoxes