Skip to content
Tutorials Center
My learning

Topics

Lesson 21 of 37 · Pollution

Water Pollution and Eutrophication

Understand types of water pollution, how nutrients cause algal blooms and dead zones, and how to calculate pollutant loads and oxygen demand.

Water pollution is the addition of substances or heat to water that make it harmful to living things or unfit for use. Rivers, lakes, groundwater and oceans all receive wastes, and clean water is a limited resource. In this lesson you will learn the main kinds of water pollutants, follow the chain of events in eutrophication, and calculate loads and oxygen demand.

Sources and types

Scientists separate sources into two groups.

  • Point sources have one identifiable outlet, such as a factory pipe or a sewage treatment plant discharge. They are easier to measure and regulate.
  • Non-point sources are spread over a large area, such as fertilizer and soil washing off farmland or oil and litter washing off streets. They are harder to control.
Pollutant type Examples Typical problem
Nutrients Nitrates, phosphates from fertilizer and sewage Eutrophication
Oxygen-demanding waste Sewage, food waste, manure Low dissolved oxygen
Pathogens Bacteria, viruses, parasites in untreated sewage Cholera, typhoid, diarrhea
Toxic chemicals Heavy metals, pesticides, industrial solvents Poisoning, bioaccumulation
Sediment Eroded soil Cloudy water, buried habitats
Heat Cooling water from power stations Warm water holds less oxygen
Plastics Bags, bottles, microplastics Entanglement, ingestion

Eutrophication step by step

Eutrophication is enrichment of water with nutrients, mainly nitrogen and phosphorus, followed by excessive plant and algal growth. In many freshwater lakes phosphorus is the limiting nutrient, meaning growth stops when it runs out. In coastal seas nitrogen is often limiting.

  1. Fertilizer, manure and sewage add nutrients to the water.
  2. Algae and cyanobacteria multiply into an algal bloom that can cover the surface.
  3. The bloom blocks light, so plants deeper down die.
  4. Bacteria decompose the dead material, using up dissolved oxygen.
  5. Oxygen falls to very low levels (hypoxia), and fish and other animals suffer or die.
  6. Water can become a dead zone, an area too low in oxygen to support most animal life.
flowchart TD
A["Nutrients from farms, sewage"] --> B["Algal bloom"]
B --> C["Light blocked, algae die"]
C --> D["Decomposers use up oxygen"]
D --> E["Hypoxia and fish kills"]

The chain of eutrophication: the bloom itself is not the killer, the decay afterwards is.

Some blooms also produce toxins that harm animals and people. Remedies include upgrading sewage treatment to remove phosphorus, planting buffer strips of vegetation along streams, applying fertilizer at the right time and amount, and restoring wetlands that absorb nutrients.

Dissolved oxygen and BOD

Dissolved oxygen (DO) is the oxygen gas dissolved in water, measured in mg/L. Cold water holds more than warm water. For fresh water at 1 atmosphere the saturation values are about 14.6 mg/L at 0 °C, 11.3 mg/L at 10 °C, 9.1 mg/L at 20 °C and 7.5 mg/L at 30 °C. Many fish need roughly 5 mg/L or more, so thermal pollution is a real hazard.

Biochemical oxygen demand (BOD) measures how much oxygen microbes use to decompose the organic matter in a water sample. The standard test is BOD₅: the oxygen used over 5 days at 20 °C in the dark. A high BOD means the water is heavily polluted with organic waste.

Decay is often modeled as a first-order process:

BOD(t) = L0 × (1 − e^(−k t))

where L0 is the ultimate demand in mg/L, k is a rate constant per day and t is time in days. A typical value of k at 20 °C for sewage is about 0.23 per day, though it varies.

Python Oxygen demand over time

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Calculating a pollutant load

A load is the mass of a pollutant carried per unit time. Concentration alone is not enough, because a river with a modest concentration but huge flow can carry a huge load.

Since 1 mg/L equals 1 g/m³, the load in kilograms per day is:

load (kg/day) = concentration (mg/L) × flow (m³/s) × 86,400 / 1,000

Worked example: a stream flows at 2.0 m³/s with 0.5 mg/L of total phosphorus. Load = 0.5 × 2.0 × 86.4 = 86.4 kg of phosphorus per day.

Python Phosphorus load calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Groundwater and drinking water

Groundwater can also be polluted by leaking tanks, landfills, septic systems and over-applied fertilizer. Because it moves slowly, contamination can last for decades and is hard to clean. Drinking-water treatment usually includes screening, coagulation and settling, filtration and disinfection. In places without safe water and sanitation, waterborne disease is still a major cause of illness, especially for young children.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Which is a non-point source of water pollution?

    Non-point sources are diffuse and have no single outlet.
  2. 2. What directly causes oxygen depletion after an algal bloom?

    Bacteria use dissolved oxygen as they decompose the dead organic matter.
  3. 3. A river carries 0.4 mg/L of nitrate-N at 5 m³/s. What is the load in kg per day?

    0.4 × 5 × 86.4 = 172.8 kg/day.
  4. 4. Why is warm cooling water from a power station a problem?

    Gas solubility falls as temperature rises, so oxygen levels drop.

Summary

  • Point sources have one outlet; non-point sources are diffuse.
  • Eutrophication is nutrient enrichment, then a bloom, then decay that uses up oxygen.
  • Dissolved oxygen falls as water warms; BOD measures oxygen demand of organic waste.
  • Load = concentration × flow, with units converted carefully.
  • Treatment upgrades, buffer strips and wetlands reduce nutrient pollution.

Next: Solid Waste and Soil Contamination