Skip to content
Tutorials Center
My learning

Topics

Lesson 20 of 37 · Pollution

Air Pollutants, Smog and Acid Rain

Learn the main air pollutants, where they come from, how smog and acid rain form, and how to convert and compare pollutant concentrations.

Air looks clean even when it is not. Air pollution means substances in the atmosphere at levels that can harm people, other living things or materials. Some pollutants come from nature, such as volcanic ash and wildfire smoke. Most of the serious urban problems, however, come from burning fuels in vehicles, power stations, factories and homes.

In this lesson you will meet the main pollutants, learn how smog and acid rain form, and practice the unit conversions that environmental scientists use every day. This is the first lesson of the Pollution chapter, so we start with the air you are breathing right now.

Primary and secondary pollutants

A primary pollutant is released directly from a source. A secondary pollutant forms later in the atmosphere when primary pollutants react.

Pollutant Main sources Main effects
Particulate matter (PM2.5, PM10) Combustion, dust, construction, wildfires Lung and heart disease, haze
Nitrogen oxides (NOx = NO + NO₂) Hot engines, power stations Smog, acid rain, lung irritation
Sulfur dioxide (SO₂) Burning coal and oil that contain sulfur, smelters Acid rain, breathing problems
Carbon monoxide (CO) Incomplete burning of fuel Reduces oxygen carried by blood
Volatile organic compounds (VOCs) Solvents, fuel vapor, plants Help form ground-level ozone
Ground-level ozone (O₃) Secondary: made from NOx + VOCs + sunlight Lung damage, crop damage
Lead (Pb) Old leaded petrol, smelters Harms the nervous system, especially in children

PM2.5 means particles with a diameter of 2.5 micrometers (µm) or less. They are so small that they travel deep into the lungs and some enter the bloodstream. PM10 means particles up to 10 µm. The World Health Organization (WHO) 2021 guidelines recommend an annual average PM2.5 of no more than 5 µg/m³ and a 24-hour average of no more than 15 µg/m³. Many cities exceed these values by a wide margin.

Do not confuse ozone in two places. Ozone high in the stratosphere shields us from ultraviolet light and is helpful. Ozone at ground level is a pollutant.

Concentration units

Gases are often reported in parts per billion (ppb) or parts per million (ppm), which are ratios by number of molecules. Particles are reported in micrograms per cubic meter (µg/m³), a mass per volume. To compare a gas in ppb with a guideline in µg/m³, convert with the molar volume of a gas.

At 25 °C and 1 atmosphere, one mole of any ideal gas occupies about 24.45 L. So:

µg/m³ = ppb × (molar mass in g/mol) / 24.45

Worked example: 60 ppb of ozone. The molar mass of O₃ is 48.00 g/mol, so 60 × 48.00 / 24.45 ≈ 118 µg/m³.

Python Convert ppb to µg/m³

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Smog

Smog is a mix of smoke and fog. There are two classic kinds.

Photochemical smog forms on sunny days in cities with heavy traffic. Hot engines make nitric oxide (NO). In the air, NO becomes NO₂. Sunlight splits NO₂ into NO and an oxygen atom, and that oxygen atom joins O₂ to make ozone. VOCs help keep the ozone from being destroyed again, so levels build up in the afternoon. The brown haze and the eye irritation come from this chemistry.

Industrial (sulfurous) smog comes from burning coal and oil with sulfur in it. It is rich in SO₂ and soot and is worst in cold, damp weather. Cities that burned a lot of coal in the past had severe episodes. Fuel standards and cleaner power have reduced it in many countries.

Weather decides how bad smog gets. Normally air is warmest near the ground and cools with height, so pollution rises and mixes. In a temperature inversion, a layer of warm air sits above cooler air near the ground and acts like a lid. Pollutants pile up underneath, especially in valleys and basins.

flowchart LR
A["Engines and industry"] --> B["NOx and VOCs"]
B --> C["Sunlight drives reactions"]
C --> D["Ground-level ozone and smog"]
E["Inversion layer traps air"] --> D

Photochemical smog needs emissions, sunlight and calm, trapped air.

Acid rain

Natural rain is slightly acidic, with a pH of about 5.6, because carbon dioxide dissolves in water to make weak carbonic acid. Acid rain (more exactly, acid deposition) is rain, snow, fog or dry particles with a pH below about 5.6. It forms when SO₂ and NOx react with water, oxygen and other chemicals to make sulfuric acid and nitric acid.

Effects include damaged leaves and weakened forests, acidified lakes where fish eggs fail to hatch, leached soil nutrients, and faster corrosion of limestone, marble and metals. Because pollutants can travel hundreds of kilometers on the wind, the damage often appears far from the source. This is why acid rain is a cross-border problem.

Remember that the pH scale is logarithmic: each unit is a factor of 10 in hydrogen ion concentration. Rain of pH 4.6 is ten times more acidic than rain of pH 5.6.

Python How much more acidic?

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Reducing air pollution

Solutions fall into three groups. Prevent: use less fuel, switch to wind, solar or hydro power, improve public transport. Capture: catalytic converters in cars, scrubbers that remove SO₂ from smokestacks, filters that trap particles. Regulate: set emission limits and fuel standards, and monitor air quality. Removing lead from petrol is one of the clearest success stories, and sulfur controls cut acid rain in many regions.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Which pollutant is a secondary pollutant?

    Ozone is not emitted directly. It forms when NOx and VOCs react in sunlight.
  2. 2. What does a temperature inversion do?

    A warm layer above cooler air acts as a lid, so pollutants cannot rise and disperse.
  3. 3. Rain has a pH of 4.6. Compared with natural rain at pH 5.6, it has

    One pH unit is a factor of 10 in hydrogen ion concentration.
  4. 4. Which gases mainly cause acid rain?

    They form sulfuric and nitric acids in the atmosphere.

Summary

  • Primary pollutants are emitted directly; secondary pollutants such as ozone form in the air.
  • PM2.5 particles are small enough to enter deep into the lungs.
  • Photochemical smog needs NOx, VOCs and sunlight; inversions trap it.
  • Acid rain has pH below about 5.6 and comes from SO₂ and NOx.
  • Prevent, capture and regulate are the three ways to cut air pollution.

Next: Water Pollution and Eutrophication