Skip to content
Tutorials Center
My learning

Topics

Lesson 4 of 37 · Getting Started

Measuring the Environment: Units, Concentrations and Data

Learn SI units, scientific notation, percentages, ppm and ppb, and per-capita rates so you can read environmental data and convert between units correctly.

Environmental science runs on numbers: parts per million of carbon dioxide, tonnes of waste per person, kilowatt-hours of electricity. To read a report or check a claim, you must be comfortable with units and with very large and very small numbers. This lesson gives you the toolkit and lets you practice with short programs.

SI units and prefixes

Scientists worldwide use the International System of Units (SI). Some base units you will meet most often:

Quantity SI unit Symbol
Length meter m
Mass kilogram kg
Time second s
Temperature kelvin (degrees Celsius is also common) K (°C)
Amount of substance mole mol

Prefixes change the size of a unit by powers of ten.

Prefix Symbol Factor
giga G 10⁹ (a billion)
mega M 10⁶ (a million)
kilo k 10³ (a thousand)
milli m 10⁻³
micro µ 10⁻⁶
nano n 10⁻⁹

Environmental texts also use the tonne (metric ton): 1 tonne = 1,000 kg. Large carbon amounts are often given in gigatonnes (Gt, billions of tonnes) or, for carbon, in "GtC" (gigatonnes of carbon) or "GtCO₂" (gigatonnes of carbon dioxide). The two are not the same: one tonne of carbon corresponds to about 3.67 tonnes of CO₂, because CO₂ has molar mass about 44 g/mol and carbon about 12 g/mol (44 ÷ 12 ≈ 3.67). Always check which one a source uses.

Scientific notation

Writing 7,800,000,000 is clumsy. Scientific notation writes a number as a value between 1 and 10 times a power of ten: 7.8 × 10⁹. In Python this appears as 7.8e9. Small numbers work the same way: 0.00032 = 3.2 × 10⁻⁴ = 3.2e-4.

Concentrations: percent, ppm and ppb

A concentration tells you how much of a substance is in a mixture.

  • Percent (%) is parts per hundred.
  • Parts per million (ppm) is parts per 1,000,000. So 1 % = 10,000 ppm, and 1 ppm = 0.0001 %.
  • Parts per billion (ppb) is parts per 1,000,000,000. 1 ppm = 1,000 ppb.

For gases in air, ppm and ppb are normally by volume (or by moles; for ideal gases the two are the same). For example, if the atmosphere holds about 420 ppm of carbon dioxide (a recent value), that is 420 ÷ 1,000,000 = 0.042 % of the air by volume.

For water, 1 ppm is about 1 mg per liter (because a liter of water has a mass of about 1 kg = 1,000,000 mg). This approximation works for dilute solutions in water.

Python Converting between percent, ppm and ppb

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Mass per volume for gases

Air-quality agencies often report gases as micrograms per cubic meter (µg/m³). To compare with a ppb value you can convert with the molar volume of an ideal gas. At 25 °C and 1 atmosphere, one mole of gas occupies about 24.45 liters. The formula is:

ppb = (µg/m³ × 24.45) / molar mass (g/mol)

For ozone (O₃, molar mass 48 g/mol) a reading of 100 µg/m³ is therefore (100 × 24.45) / 48 ≈ 50.9 ppb. The conversion depends on temperature and pressure, so reports state the reference conditions they use.

Python From µg/m³ to ppb

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The same mass concentration gives different ppb values for different gases, because their molecules have different masses.

Rates and per-capita values

To compare countries or cities of different sizes, divide by population. A per-capita value means "per person." If a town of 50,000 people produces 30,000 tonnes of waste in a year, that is 30,000 ÷ 50,000 = 0.6 tonnes, or 600 kg, per person per year.

A rate is an amount per unit of time, such as 2.4 ppm per year. Remember to match time units when you compare rates.

Reading data carefully

Good habits when you see a number:

  1. Check the unit. Is it GtC or GtCO₂? Liters or cubic meters? Mass or volume?
  2. Check the reference. Per person? Per year? Per unit of economic output?
  3. Mind significant figures. Do not report 3.14159 tonnes if your scale reads to the nearest 0.1 tonne.
  4. Look at the scale of a graph. A y-axis that does not start at zero can make small changes look big.
  5. Ask where the data came from and whether it was measured or estimated.

Environmental data also come with uncertainty. A value such as 4.2 ± 0.3 means the true value probably lies between 3.9 and 4.5. Honest scientists report this range.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. How many ppm is 0.5 % ?

    1 % equals 10,000 ppm, so 0.5 % equals 5,000 ppm.
  2. 2. In dilute water solutions, 1 ppm is approximately equal to

    A liter of water is about 1,000,000 mg, so 1 part per million is about 1 mg per liter.
  3. 3. Which is the correct scientific notation for 0.00032?

    Move the decimal point four places to the right to get 3.2, so the power of ten is −4.
  4. 4. A town of 20,000 people sends 8,000 tonnes of waste to a landfill each year. What is the per-capita amount?

    8,000 ÷ 20,000 = 0.4 tonnes, which is 400 kg.

Summary

  • Use SI units and prefixes (kilo, mega, giga, milli, micro) and keep track of tonnes versus kilograms.
  • Scientific notation (7.8 × 10⁹, 7.8e9) handles very large and very small numbers.
  • 1 % = 10,000 ppm and 1 ppm = 1,000 ppb; in dilute water, 1 ppm is about 1 mg/L.
  • Converting µg/m³ to ppb uses the molar mass and the molar volume (about 24.45 L/mol at 25 °C, 1 atm).
  • Per-capita values make fair comparisons; always check units, references and uncertainty.

Next: People and the Environment: The IPAT Equation