Skip to content
Tutorials Center
My learning

Topics

Lesson 23 of 37 ยท Pollution

Toxicity, Dose-Response and Biomagnification

Learn how scientists measure toxicity with dose-response curves and LD50, and how persistent pollutants build up through food chains.

A famous idea in toxicology says that "the dose makes the poison". Almost any substance, even water or table salt, can harm you in a large enough amount, while many harmful substances are safe in tiny amounts. Toxicology is the study of harmful effects of chemicals on living things. In this lesson you will learn how doses are measured, how to read a dose-response curve, and why some pollutants become more concentrated as they move up a food chain.

Hazard and risk

A hazard is something that can cause harm. Risk is the chance that harm actually happens, which depends on both how hazardous a substance is and how much exposure there is.

risk depends on hazard ร— exposure

A dangerous chemical locked in a sealed container is a hazard but poses little risk. A mildly toxic chemical that everybody breathes every day can pose a larger risk. Exposure can be acute (a single large dose or short period) or chronic (a small dose over a long time). Routes of exposure are inhalation, ingestion and skin contact.

Dose and units

The dose is the amount of substance taken into the body, usually scaled by body mass so animals of different sizes can be compared. It is written in mg per kg of body weight (mg/kg).

Worked example: a child of 20 kg swallows 5 mg of a chemical. The dose is 5 / 20 = 0.25 mg/kg. An adult of 70 kg would need 17.5 mg to receive the same dose per kilogram.

Dose-response curves and LD50

A dose-response curve plots dose on the x-axis (often on a log scale) and the percentage of test organisms showing an effect on the y-axis. The curve is usually S-shaped (sigmoid): nothing happens at low doses, effects rise quickly over a middle range, then level off near 100%.

Key terms:

  • LD50: the dose that is lethal to 50% of a test population. A lower LD50 means a more acutely toxic substance.
  • LC50: the concentration in air or water that kills 50% of the population.
  • Threshold dose: the dose below which no effect is seen, for substances that have one.
  • NOAEL: the no-observed-adverse-effect level, the highest tested dose with no harmful effect seen. Safety limits for people are often set well below it to leave a margin for uncertainty.
Python Plot a dose-response curve

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The curves are the same shape, but chemical A is ten times more toxic because it reaches the 50% point at one tenth of the dose.

Animal tests give estimates, and species differ. Scientists add safety factors and prefer methods that use fewer animals, such as cell cultures and computer models, where they can.

Persistence, bioaccumulation and biomagnification

Some pollutants break down quickly. Others are persistent, meaning they stay in the environment for years or decades. Persistent chemicals that dissolve in fat rather than water are stored in the bodies of living things.

  • Bioaccumulation: a substance builds up in a single organism over its lifetime because it takes it in faster than it can get rid of it.
  • Biomagnification: the concentration rises at each step up a food chain, so top predators have the highest levels.

Classic examples are the pesticide DDT, which thinned the eggshells of some birds of prey, and methylmercury in large predatory fish. Heavy metals such as mercury and persistent organic pollutants such as PCBs behave this way. This is why advice for pregnant women and children often limits how often they eat certain large fish.

flowchart LR
A["Water: very low level"] --> B["Plankton"]
B --> C["Small fish"]
C --> D["Large fish"]
D --> E["Fish-eating bird or human"]

Concentrations climb at every link in the chain.

Energy passes up a food chain with only about 10% efficiency, so a predator must eat a lot of prey. Persistent chemicals are not burned off like energy, so they pile up.

Python Biomagnification model

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Reducing chemical risks

International agreements such as the Stockholm Convention (2001) restrict or ban persistent organic pollutants. The precautionary principle says that if an activity may cause serious harm, a lack of full proof should not delay protective action. Chemical safety also relies on labels, exposure limits at work, safer substitutes and proper disposal of hazardous waste. You will see more about law and policy in environmental laws and treaties.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. A substance has an LD50 of 5 mg/kg and another has 500 mg/kg. Which is more acutely toxic?

    A lower LD50 means a smaller dose kills half the test animals.
  2. 2. Biomagnification means that

    Persistent, fat-soluble chemicals become more concentrated in higher consumers.
  3. 3. A 25 kg child swallows 10 mg of a chemical. What is the dose?

    10 mg divided by 25 kg is 0.4 mg/kg.
  4. 4. Risk depends on

    A hazardous chemical poses little risk if nobody is exposed to it.

Summary

  • Risk combines how hazardous a substance is with how much exposure occurs.
  • Dose is normally given per kilogram of body mass.
  • A dose-response curve is S-shaped; LD50 is the dose that kills half of a population.
  • Persistent, fat-soluble pollutants bioaccumulate and biomagnify.
  • The precautionary principle and international treaties limit dangerous chemicals.

Next: The Greenhouse Effect and Energy Balance