Skip to content
Tutorials Center
My learning

Topics

Lesson 36 of 37 ยท Projects and Practice

Project: A Water and Waste Audit

Measure how much water and waste a household produces, build a calculator to analyze the data, and find the best savings, with a hands-on plan.

An audit is a careful measurement of what goes in and what comes out. In this project you will audit water use and waste in a home or classroom for one week, then analyze the numbers in code. The method is the same one that companies, schools and cities use to find savings. You will collect your own real data, so the lesson shows how to measure and calculate. It does not supply measured results, because those come from you.

Plan the audit

  1. Pick the place: your home, a school bathroom or the canteen.
  2. Choose the period: at least 7 days so weekday and weekend patterns show.
  3. Keep a simple log with date, activity and amount.
  4. Measure safely. Never handle broken glass, sharp items or unknown chemicals, and wear gloves and wash your hands when sorting waste. Get permission from an adult.

Part A: Water

You can measure water without special tools.

  • Taps and showers: time how long the water runs, and measure the flow once by filling a bucket of known volume for 10 seconds. Flow (L/min) = liters collected ร— 6.
  • Toilets: look up or measure the flush volume (a mark on the cistern, or fill a bucket after one flush with the inlet closed, only if an adult agrees).
  • Washing machines and dishwashers: check the manual for liters per cycle.
  • Water meter: if there is one, read it each morning and subtract. It gives the best total.
  • Leaks: a dripping tap wastes water continuously. Collect the drips for a minute to estimate, and check the toilet by adding a few drops of food coloring to the cistern: if color appears in the bowl without flushing, there is a leak.
Python Water use calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Test a saving

Suppose you shorten showers by 2 minutes or fix a leak. Calculate the saving before and after.

Python What-if water savings

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Part B: Waste

For one week, keep household waste separate: landfill rubbish, recyclables (paper, glass, metal, plastic), and organic waste (food and garden). Weigh each bag with a kitchen or bathroom scale (subtract your own weight if you weigh yourself holding the bag, or use a kitchen scale for smaller amounts). Note the type of the largest items. A "waste sort" of a single bag, with gloves and a clean surface, shows what could have been reduced, reused, recycled or composted (see solid waste).

Python Waste audit analysis

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Analyze and act

Questions to answer in your report:

  1. What is your water use in liters per person per day, and which activity is the biggest part?
  2. How does it compare with the scarcity thresholds in freshwater resources? Note that household use is only a small part of total water use, since farming and industry use most.
  3. What share of your waste could be reduced, reused, recycled or composted?
  4. Choose the three changes with the biggest effect and the lowest effort. Estimate their savings in numbers.
  5. Repeat the audit after two weeks of changes. Did the numbers move? What surprised you?

Present your data in a table and a chart, state the uncertainty (for example, you estimated flows) and avoid claiming more precision than you measured.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. A bucket of 12 L fills in 10 seconds from a shower. What is the flow in L per minute?

    12 L in 10 s is 12 ร— 6 = 72 L per minute.
  2. 2. Why should an audit last at least one week?

    Habits differ across days, so a longer period gives more representative data.
  3. 3. What is the best way to reduce waste according to the waste hierarchy?

    Prevention sits at the top of the hierarchy.
  4. 4. A toilet cistern shows food coloring in the bowl without flushing. This suggests

    Water is leaking past the flush valve into the bowl.

Summary

  • An audit measures inputs and outputs over a long enough period to be representative.
  • Water flow can be measured with a bucket and timer; leaks can be detected with food coloring.
  • Weighing and sorting waste shows what can be reduced, reused, recycled or composted.
  • Calculations turn measurements into savings you can test.
  • Report uncertainty honestly and repeat the audit to check the effect of changes.

Next: Environmental Science Practice Set