Skip to content
Tutorials Center
My learning

Topics

Lesson 18 of 37 · Energy Sources

Solar and Wind Energy

Learn how solar panels and wind turbines work, the cube law and Betz limit for wind power, capacity factors and intermittency, with runnable calculations.

Sunlight and wind are flow resources: they arrive continuously and are not used up. Solar and wind power have grown extremely fast in recent years, and their costs have fallen sharply, so in many places they are now among the cheapest ways to produce new electricity. This lesson explains how they work, how much power you can expect, and why their variable output matters.

How much sunlight is there?

At the top of Earth's atmosphere, sunlight delivers about 1,361 W per square meter on a surface facing the Sun (the solar constant). Averaged over the whole globe, day and night, summer and winter, equator and poles, the average falls to about one quarter of that, roughly 340 W/m², because Earth is a sphere (a sphere's surface area is four times the area of its shadow disc). After clouds and the atmosphere reflect and absorb some, the average reaching the ground is lower still. A sunny location receives an average (over 24 hours and the year) of about 200 W/m², which is 4.8 kWh per square meter per day. Total sunlight arriving on Earth in one hour is, roughly, comparable to what humanity uses in a year, which shows how large the resource is.

Solar photovoltaics (PV)

A solar cell is a thin slice of semiconductor, usually silicon. When light hits it, photons give energy to electrons, freeing them. The cell's built-in electric field (a p-n junction) pushes these electrons in one direction, creating a direct current (DC). An inverter converts DC to the AC used by the grid. This is the photovoltaic effect.

  • Commercial panels convert roughly 15-23 % of the sunlight into electricity. The theoretical limit for a single silicon junction is about 30 %.
  • Output falls a little as panels heat up, and it drops to zero at night.
  • Panels last 25 years or more, and the energy used to make them is repaid within roughly one to three years of operation (the energy payback time; values depend on location and technology).

Solar thermal systems use sunlight to heat water directly (rooftop heaters) or concentrate it with mirrors to make steam (concentrating solar power).

Python How much energy does a solar panel make?

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The peak-sun-hours and performance ratio are typical example values. For a real installation, installers use local data.

Wind power

Wind is moving air, so it carries kinetic energy. A turbine's blades extract part of it. The power in wind passing through the area A swept by the blades is:

P = ½ × ρ × A × v³

  • ρ (rho) is air density, about 1.225 kg/m³ at sea level and 15 °C.
  • A = π r² is the rotor area, where r is the blade length.
  • v is wind speed in m/s.

The wind speed is cubed. That is the most important feature: doubling the wind speed gives eight times the power, and a 10 % increase in speed gives about 33 % more power (1.1³ = 1.331). Wind farms therefore try to find windy sites, and taller towers reach faster wind.

A turbine cannot capture all of this power, because the air must keep moving after passing the blades. The Betz limit says that no turbine can extract more than 16/27, about 59.3 %, of the wind's power. Practical turbines reach roughly 40-50 % of the wind's power at best, before mechanical and electrical losses. Turbines also have a cut-in speed (below which they do not turn, about 3-4 m/s), a rated speed (about 11-14 m/s, where they reach full power) and a cut-out speed (about 25 m/s) at which they shut down to protect themselves.

Python Wind power and the cube law

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The printed values grow by a factor of eight when wind speed doubles from 4 to 8 m/s. The plotted curve is simplified: it ignores the cut-in and cut-out speeds.

Capacity factor and intermittency

Solar panels make no power at night and less in winter or under cloud; wind turbines idle when the air is calm. This is intermittency (variability). The capacity factor compares the actual annual output with the maximum if the plant ran at full power all the time. Typical values: solar PV about 10-25 %, onshore wind about 25-45 %, and offshore wind about 40-55 %, depending on the site (these are approximate ranges).

Variability does not mean unreliability when planned for. Ways to manage it:

  • Geographic spread: wind and sun differ from place to place.
  • Combining sources: wind often blows more at night and in winter when solar is weaker.
  • Storage: batteries for hours, pumped hydro storage, and other options for longer.
  • Flexible demand: shifting use to sunny or windy hours (smart charging, water heating).
  • Grid connections between regions, and backup plants.
flowchart LR
    A["Sunlight and wind<br/>(variable supply)"] --> B["Electricity grid"]
    C["Batteries and<br/>pumped storage"] <--> B
    D["Flexible demand"] <--> B
    E["Dispatchable backup<br/>(hydro, gas, nuclear)"] --> B
    B --> F["Users"]

Reliable electricity from variable sources needs a mix of storage, flexibility and backup.

Environmental effects

Both are low-carbon over their lifecycle (solar about 20-50 g CO₂ per kWh and wind about 10-15 g, by typical lifecycle assessments, versus around 800-1,000 g for coal). They also have impacts: land use (large solar farms and wind farm spacing, though farming can continue between turbines), mining of materials for panels, magnets and batteries, bird and bat collisions with turbines (small compared with other human causes such as buildings and cats, but important for some rare species), noise, visual change, and end-of-life recycling of blades and panels. Siting wisely reduces most of these effects.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. If wind speed doubles, what happens to the power in the wind?

    Power is proportional to v³, and 2³ = 8.
  2. 2. What does the Betz limit say?

    The Betz limit is 16/27 ≈ 59.3 %, because the air has to keep moving after it passes the rotor.
  3. 3. Which describes the capacity factor of a wind farm?

    A capacity factor of 35 % means the farm produced 35 % of the energy it would have produced at full rated power all year.
  4. 4. Which is a way to deal with the variability of solar and wind power?

    Storage, geographic spread, flexible demand and backup help match supply with demand.

Summary

  • The solar constant is about 1,361 W/m² at the top of the atmosphere; the global average is about a quarter of that.
  • PV cells convert sunlight to electricity with roughly 15-23 % efficiency; they pay back their manufacturing energy in a few years.
  • Wind power P = ½ρAv³: the cube law makes speed critical; the Betz limit is 16/27 ≈ 59.3 %.
  • Capacity factors are lower than for nuclear or fossil plants, so variability must be managed with storage, flexibility, grid links and backup.
  • Both have low lifecycle emissions but some land, material and wildlife impacts.

Next: Hydropower, Geothermal and Biomass