Skip to content
Tutorials Center
My learning

Topics

Lesson 28 of 37 · Water, Food and Land Use

Freshwater Resources and Water Use

See where Earth's fresh water is, how people use it, what water stress means, and calculate per-person water availability and aquifer depletion.

Water is the most important resource for life, yet only a small part of Earth's water is available for people to use. This lesson shows where fresh water is found, how it is used, how scarcity is measured, and what happens when we take too much.

Where Earth's water is

About 97% of Earth's water is salty ocean water. Only about 2.5% is fresh. Of that fresh water, roughly two thirds is locked in glaciers and ice caps and almost all the rest is groundwater. Lakes, rivers, soil moisture and the atmosphere hold only a tiny share, yet rivers and lakes supply much of what we use.

flowchart TD
A["All water on Earth"] --> B["Salt water, about 97%"]
A --> C["Fresh water, about 2.5%"]
C --> D["Ice and glaciers, about two thirds"]
C --> E["Groundwater, about 30%"]
C --> F["Surface water and other, under 1%"]

Percentages are rounded; sources differ slightly.

The water cycle moves water continuously: evaporation and transpiration lift water into the air, condensation forms clouds, precipitation returns it, and runoff and infiltration carry it to rivers and aquifers. A renewable supply is replenished by this cycle every year, so the amount of water is not lost, but its location, timing and quality can change.

Surface water and groundwater

Surface water flows or sits above ground: rivers, lakes, reservoirs. A watershed (or drainage basin) is the area that drains into one river system.

Groundwater fills the pores and cracks of soil and rock below the water table. A rock layer that holds and yields useful amounts of water is an aquifer. Wells reach it. Some aquifers refill within years; others hold fossil water laid down thousands of years ago that is replaced extremely slowly, so pumping it is effectively mining.

When pumping exceeds recharge (overdraft), the water table falls, wells run dry, land can sink (subsidence), and near the coast salty water can invade the aquifer (saltwater intrusion).

Who uses the water

Water withdrawal is the water taken from a source. Consumption is the part that does not return, because it evaporates, is incorporated in products or crops, or flows somewhere else. Globally, agriculture accounts for roughly 70% of freshwater withdrawals, industry for around 20% and households for about 10%, though the shares differ greatly between countries. Irrigated farms often lose a large part of their water to evaporation and leaks.

Measuring scarcity

Hydrologists often use the Falkenmark indicator, based on renewable water per person per year:

Water per person per year Category
More than 1,700 m³ Adequate
Below 1,700 m³ Water stress
Below 1,000 m³ Water scarcity
Below 500 m³ Absolute scarcity

Another view is the water footprint: the total volume of fresh water used to produce the goods and services someone consumes, including the water hidden in food and products (virtual water).

Python Water per person

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Scarcity has two forms. Physical scarcity means there is not enough water for demand. Economic scarcity means water exists but people lack the infrastructure or money to access it. Population growth, rising income and climate change all raise demand or change supply.

Aquifer depletion calculation

Worked example: an aquifer covers 10,000 km² and has a usable storage fraction of 15% (specific yield 0.15). If the water table drops 1 meter, the volume removed is area × drop × yield.

10,000 km² = 10,000 × 10⁶ m² = 1 × 10¹⁰ m². Volume = 1 × 10¹⁰ × 1 × 0.15 = 1.5 × 10⁹ m³, or 1.5 km³.

Python Aquifer overdraft simulator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Using water wisely

  • Agriculture: drip irrigation, mulching, tolerant crops, scheduling by soil moisture.
  • Industry: recycle process water.
  • Cities: fix leaks (often a large loss), meter water, reuse treated wastewater, harvest rain.
  • Pricing and rules: charge fairly for water, limit pumping, protect watersheds.
  • Desalination: removes salt from seawater, which helps coastal dry regions, but uses a lot of energy and produces concentrated brine.

Because rivers cross borders, water can cause conflict or cooperation. Treaties on shared rivers and aquifers help. You will see how large dams reshape rivers in the land use lesson.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Roughly what percentage of Earth's water is fresh?

    About 97% is salty, and only around 2.5% is fresh.
  2. 2. A country has 800 m³ of renewable water per person per year. Using the Falkenmark indicator, it faces

    Below 1,000 m³ is scarcity; absolute scarcity starts below 500 m³.
  3. 3. What is overdraft?

    Overdraft makes the water table fall over time.
  4. 4. Which sector uses the largest share of freshwater withdrawals globally?

    Agriculture, mainly irrigation, accounts for roughly 70%.

Summary

  • Only about 2.5% of Earth's water is fresh, and most of it is ice or groundwater.
  • Aquifers can be renewable or fossil; overdraft causes falling water tables, subsidence and saltwater intrusion.
  • Agriculture takes roughly 70% of withdrawals.
  • The Falkenmark indicator ranks water per person; scarcity may be physical or economic.
  • Efficiency, reuse, fair pricing and watershed protection help.

Next: Agriculture and Food Security