Skip to content
Tutorials Center
My learning

Topics

Lesson 19 of 37 · Energy Sources

Hydropower, Geothermal and Biomass

How hydropower, geothermal and biomass energy work, how to calculate hydro power from flow and height, and the environmental benefits and trade-offs of each.

Besides sun and wind, three other renewable sources matter a great deal: moving water, heat from inside the Earth, and energy stored in plants and wastes. Hydropower is the world's largest renewable source of electricity, geothermal is a steady source of heat and power in some places, and biomass is the oldest fuel humans have used. Each has advantages and clear trade-offs.

Hydropower

Hydropower uses the gravitational energy of falling or flowing water. The Sun drives the water cycle that lifts water to high ground, so hydropower is really a form of solar energy.

In a typical dam, water collects in a reservoir, flows down a pipe called a penstock, spins a turbine, and a generator turns the motion into electricity. The power available is:

P = η × ρ × g × Q × h

  • η (eta) is overall efficiency (large hydro turbines can exceed 90 %).
  • ρ is the density of water, 1,000 kg/m³.
  • g is the acceleration of gravity, 9.81 m/s².
  • Q is the flow rate in cubic meters per second.
  • h is the head, the height difference in meters between the water surface and the turbine.

Units check: kg/m³ × m/s² × m³/s × m = kg·m²/s³ = watts.

Python Hydropower calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The examples are illustrative designs, not particular real dams. Notice that power depends equally on flow and on head: a high head lets even a modest river make serious power.

Types

  • Reservoir (storage) hydro: a dam stores water, so output can be raised or lowered quickly. It is both a source of power and a form of storage.
  • Run-of-river: diverts part of a river's flow through turbines, with little or no storage. It has fewer impacts but depends on the river's flow.
  • Pumped storage: pumps water uphill when power is cheap and releases it to generate electricity when it is needed. It acts as a giant battery and is the largest form of grid energy storage today.

Impacts

  • Dams block fish migration and alter river flow, temperature and sediment. Sediment that would nourish deltas and floodplains gets trapped behind the dam.
  • Reservoirs flood land, sometimes displacing communities and drowning habitat.
  • Rotting vegetation in new reservoirs, especially in warm regions, can release methane and CO₂, so some reservoirs have higher emissions than others.
  • Dam failures are rare but dangerous, and droughts reduce output.

Geothermal energy

Earth is hot inside. Temperature increases with depth, on average by about 25-30 °C per kilometer in the upper crust (the geothermal gradient), with much higher values near volcanoes and plate boundaries. The heat comes from the planet's formation and from the decay of radioactive elements in the rock.

  • Geothermal power plants use hot water or steam from wells to turn turbines. They work best where the hot rock is near the surface: Iceland, Kenya, the Philippines, Indonesia, New Zealand, Italy, California and others. Output is steady day and night, with capacity factors often above 70 %.
  • Direct use pipes hot water to heat buildings, greenhouses or fish farms (Iceland heats most of its homes this way).
  • Geothermal heat pumps use the nearly constant temperature a few meters underground (about the yearly average air temperature) for heating and cooling nearly anywhere. They are an efficient use of electricity rather than a power source.

Concerns include the limited number of suitable sites, small amounts of gases (hydrogen sulfide, CO₂) released from the ground, the cooling of a reservoir if heat is taken out faster than it is replaced, and small earthquakes caused by injection in some enhanced systems. Emissions per kWh are generally low.

Python Temperature at depth

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

In ordinary regions a depth of around 5 km is needed for temperatures useful for power, which is why enhanced geothermal systems (drilling deep and cracking hot rock) are a research and development area, while places with a high gradient are used first.

Biomass and biofuels

Biomass is organic material from plants and animals used as fuel: firewood, crop residues, dung, wood pellets, organic waste, and crops grown for energy. Biomass releases the energy stored by photosynthesis when burned.

  • Traditional biomass (wood and dung burned on open fires) is still the main cooking fuel for roughly 2 billion people. It causes severe indoor air pollution and many premature deaths each year, and can drive deforestation in places.
  • Modern biomass includes power plants burning wood waste, biogas from the decay of manure or sewage in digesters (mostly methane), and biofuels.
  • Biofuels: ethanol (fermented from sugar cane, corn and other crops, blended with gasoline) and biodiesel (from vegetable oils or fats). Advanced biofuels use wastes and non-food plants.

Is biomass carbon neutral?

Plants absorb CO₂ while growing and release it when burned, so some say that bioenergy is "carbon neutral." That is only partly true:

  • If the biomass would have decayed anyway (waste), burning it adds little extra net carbon.
  • If it is grown specifically for fuel on land that was forest or grassland, clearing releases stored carbon (land-use change) and takes years or decades to pay back.
  • Fertilizer, harvesting, drying and transport use fossil energy.
  • Slow-growing trees take decades to absorb the carbon that burning released in minutes, so timing matters for climate goals.

There is also the food versus fuel question: land used for energy crops is not used for food, which can push up food prices and expand farmland into forest.

Python Energy in biomass

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

These are typical figures; moisture changes the value a lot (wet wood contains much less energy per kilogram).

Comparing the three

Source Strength Main limit
Hydropower Large, flexible, long-lived; storage possible Few good sites; ecological and social impacts
Geothermal Steady output, low emissions Location-dependent; high drilling cost
Biomass Storable fuel; uses waste Land use, air pollution, not always low carbon

The best energy mix depends on place, and the final chapters of this slice-by-slice course come back to how choices are made.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A hydropower plant has a flow of 50 m³/s and a head of 40 m. With 90 % efficiency, about how much power does it produce? (ρ = 1,000 kg/m³, g = 9.81 m/s²)

    P = 0.9 × 1000 × 9.81 × 50 × 40 ≈ 17.66 million W, which is about 17.7 MW.
  2. 2. What is the role of pumped storage?

    Pumped storage works like a large battery, moving water up when electricity is cheap and down through turbines when it is needed.
  3. 3. About how fast does temperature rise with depth in the upper crust on average?

    The average geothermal gradient is roughly 25-30 °C per km, though it is much higher in volcanic regions.
  4. 4. Why is biomass not automatically carbon neutral?

    Land-use change, fossil energy in the supply chain and the time plants take to re-absorb the carbon can make biomass emit net carbon.

Summary

  • Hydropower: P = ηρgQh; dams give flexible power and storage but alter rivers and flood land.
  • Geothermal energy uses the Earth's heat (about 25-30 °C per km on average); it is steady but site-limited.
  • Biomass includes wood, waste and biofuels; it can be low-carbon if made from waste or sustainably grown, but not automatically.
  • Each source has benefits and trade-offs, so the right mix depends on local conditions.

Next: Air Pollutants, Smog and Acid Rain