Skip to content
Tutorials Center
My learning

Topics

Lesson 22 of 38 ยท Limiting Reagents and Yield

Theoretical, Actual and Percent Yield

Learn theoretical yield, actual yield and percent yield, why real reactions give less than the maximum, percent purity and multi-step yield, with calculators.

Stoichiometry tells you the maximum amount of product a reaction could give. A chemist in a real laboratory almost never collects that much. Some product sticks to glassware, some of the reactant takes part in side reactions, and some reactions simply do not go to completion. To judge how well a reaction worked, chemists compare what they actually collected with the maximum possible.

This lesson defines the three yield terms, shows how to calculate percent yield, and extends the idea to impure starting materials and to processes with several steps.

The three yields

  • Theoretical yield: the maximum mass (or moles) of product, calculated from the limiting reagent and the balanced equation. It is a prediction, assuming a perfect reaction.
  • Actual yield: the amount of product you really obtain and measure. This always comes from an experiment.
  • Percent yield: how close you got.

percent yield = (actual yield / theoretical yield) ร— 100 %

Both yields must be in the same unit (both grams or both moles) before you divide.

Worked example: burning magnesium

Magnesium burns in oxygen to give magnesium oxide:

2 Mg + Oโ‚‚ โ†’ 2 MgO

A student burns 5.00 g of magnesium ribbon in plenty of air and collects 7.60 g of magnesium oxide. What is the percent yield?

Step 1: theoretical yield. Oxygen is in excess, so Mg is limiting.

  • Moles of Mg: 5.00 g / 24.31 g/mol = 0.2057 mol.
  • Ratio MgO : Mg = 2 : 2 = 1 : 1, so 0.2057 mol MgO forms.
  • Molar mass of MgO: 24.31 + 16.00 = 40.31 g/mol.
  • Theoretical yield: 0.2057 ร— 40.31 = about 8.29 g.

Step 2: percent yield. 7.60 g / 8.29 g ร— 100 % = about 91.7 %.

Python Percent yield calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Why is the yield below 100 %?

Common reasons:

  • Incomplete reaction. The reaction may reach an equilibrium before all the reactant is converted.
  • Side reactions. Reactants may form unwanted by-products. (In the magnesium example, magnesium also reacts a little with nitrogen in air.)
  • Losses during handling. Product stays on filter paper, glassware or in the solution.
  • Impure reactants. If your reactant is not 100 % pure, you started with less than you thought.

A yield above 100 % is a warning sign. It usually means the product is wet, still contains solvent, or is contaminated with something else. It is never a sign of "extra" product, because the law of conservation of mass forbids creating matter.

Working backward: find the actual yield

If a problem gives the percent yield, rearrange the formula:

actual yield = theoretical yield ร— (percent yield / 100)

For example, a reaction with a theoretical yield of 12.0 g and a percent yield of 85 % gives 12.0 ร— 0.85 = 10.2 g.

You can also ask: how much reactant must I start with to obtain a target mass of product, knowing the typical yield? First divide the target by the yield fraction to get the theoretical yield you need, then do the stoichiometry backward.

Python How much reactant do I need?

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Percent purity

Real chemicals are often impure. If a sample is 92.0 % pure, only 92.0 % of its mass is the compound of interest.

mass of pure substance = sample mass ร— (percent purity / 100)

A limestone sample of 20.0 g that is 90.0 % calcium carbonate contains 18.0 g of CaCOโ‚ƒ. Only that 18.0 g takes part in the reaction CaCOโ‚ƒ โ†’ CaO + COโ‚‚. Use the pure mass in the stoichiometry. Percent purity should not be confused with percent yield: purity describes the starting material, yield describes the outcome.

Overall yield for multi-step processes

Many products are made in several steps, and each step has its own yield. The overall yield is the product of the step yields (as fractions).

For three steps with yields 90 %, 80 % and 75 %:

overall = 0.90 ร— 0.80 ร— 0.75 = 0.54 = 54 %

Even good individual steps add up to a surprisingly low overall yield, which is why chemists try to make syntheses short.

Python Overall yield of a multi-step synthesis

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. Which yield is calculated rather than measured?

    The theoretical yield comes from the balanced equation and the limiting reagent; the actual yield is weighed in the lab.
  2. 2. A reaction has a theoretical yield of 20.0 g and an actual yield of 15.0 g. What is the percent yield?

    15.0 / 20.0 ร— 100 % = 75 %.
  3. 3. A student reports a percent yield of 108 %. What is the most likely explanation?

    More than 100 % cannot be real. Typical causes are leftover solvent, water or contaminants in the product.
  4. 4. Two steps have yields of 80 % and 50 %. What is the overall yield?

    Multiply the fractions: 0.80 ร— 0.50 = 0.40, or 40 %.

Summary

  • Theoretical yield is the calculated maximum; actual yield is what you measure; percent yield = actual / theoretical ร— 100 %.
  • Compare in the same units, and base the theoretical yield on the limiting reagent.
  • Yields below 100 % come from incomplete reactions, side reactions and handling losses; above 100 % signals contamination.
  • Percent purity reduces the usable mass of an impure reactant.
  • Overall yield of a multi-step process is the product of the individual yields.

Next: Molarity: Concentration in Moles per Liter