Skip to content
Tutorials Center
My learning

Topics

Lesson 23 of 38 · Solutions and Concentration

Molarity: Concentration in Moles per Liter

Learn molarity, the most common concentration unit in chemistry: calculate M from mass and volume, find moles and grams from M, and count ions, with calculators.

Many reactions happen in water or another liquid, so chemists often measure amounts of substances as volumes of solutions instead of weighing solids. To make that work, you need a way to say how much dissolved substance a solution contains. The most common way is molarity.

In this lesson you will learn what a solution is, how to calculate molarity, how to move between molarity, moles, mass and volume, and how to handle ionic compounds that split into ions.

Solutions: solute, solvent, solution

A solution is a uniform mixture of two or more substances. The solute is the substance that dissolves (for example salt). The solvent is the substance that does the dissolving and is usually present in the larger amount (for example water). When water is the solvent, we call it an aqueous solution, and write (aq) after a formula.

A solution is concentrated when it has a lot of solute per unit volume and dilute when it has little. Those words are vague, so chemistry uses numbers.

The definition of molarity

Molarity (symbol M, unit mol/L, read "molar") is the number of moles of solute per liter of solution:

M = n / V

where n is moles of solute and V is the volume of the solution in liters. A "0.50 M NaCl solution" holds 0.50 mol of NaCl in every liter of solution.

Two points often trip people up:

  • The volume is that of the whole solution, not just the solvent you started with.
  • Convert milliliters to liters first: divide by 1000.

Calculating molarity from mass

Example: you dissolve 11.69 g of sodium chloride in water and make up the volume to 500.0 mL. What is the molarity?

  1. Molar mass of NaCl = 22.99 + 35.45 = 58.44 g/mol.
  2. Moles: 11.69 g / 58.44 g/mol = 0.200 mol.
  3. Volume: 500.0 mL = 0.5000 L.
  4. Molarity: 0.200 mol / 0.5000 L = 0.400 M.
Python Molarity calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Rearranging the formula

The formula can be turned around to answer other questions:

  • Moles of solute: n = M × V
  • Volume needed: V = n / M
  • Mass of solute: m = M × V × (molar mass)

Example: how many grams of NaOH are needed for 250.0 mL of 0.200 M solution? Moles = 0.200 mol/L × 0.2500 L = 0.0500 mol. Mass = 0.0500 mol × 40.00 g/mol = 2.00 g.

Python How much solid do I weigh out?

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

How to prepare a solution in the lab

In practice you:

  1. Weigh the solid on a balance.
  2. Dissolve it in a little water in a beaker (or directly in a volumetric flask).
  3. Transfer to the volumetric flask, rinse the beaker into it, and add water until the bottom of the meniscus sits on the mark.
  4. Stopper and invert to mix.

You do not add the solid to exactly 250 mL of water, because the final volume would then be a bit different. The flask's mark guarantees the total solution volume.

flowchart LR
    A["Weigh solute"] --> B["Dissolve in a little solvent"]
    B --> C["Transfer to volumetric flask"]
    C --> D["Fill to the mark"]
    D --> E["Mix thoroughly"]

Preparing a solution of known molarity.

Ionic compounds and ion concentrations

When an ionic compound dissolves in water it separates into ions. The ion concentrations follow the formula:

  • NaCl → Na⁺ + Cl⁻: 0.10 M NaCl gives 0.10 M Na⁺ and 0.10 M Cl⁻.
  • CaCl₂ → Ca²⁺ + 2 Cl⁻: 0.10 M CaCl₂ gives 0.10 M Ca²⁺ and 0.20 M Cl⁻.
  • Al₂(SO₄)₃ → 2 Al³⁺ + 3 SO₄²⁻: 0.10 M gives 0.20 M Al³⁺ and 0.30 M SO₄²⁻.

Mixing solutions adds moles of ions but also adds volume, so the new concentration is total moles divided by total volume (assuming volumes add, which is a good approximation for dilute solutions).

Python Ion concentrations from a formula

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Common mistakes

  • Using the volume of solvent instead of the final solution volume.
  • Forgetting to convert mL to L.
  • Confusing the amount of solute with concentration. Two liters of 0.5 M solution contain twice as many moles as one liter, but the concentration is the same.
  • Ignoring ions. For CaCl₂, chloride is twice the molarity of the compound.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. What is the molarity of a solution containing 0.50 mol of solute in 250 mL of solution?

    250 mL = 0.250 L, and 0.50 mol / 0.250 L = 2.0 mol/L.
  2. 2. How many moles of solute are in 2.0 L of 0.30 M solution?

    n = M × V = 0.30 mol/L × 2.0 L = 0.60 mol.
  3. 3. What is the chloride concentration in 0.20 M CaCl₂?

    Each formula unit gives two chloride ions, so [Cl⁻] = 2 × 0.20 M = 0.40 M.
  4. 4. Molarity uses which volume?

    Molarity = moles of solute per liter of solution.

Summary

  • Molarity M = n / V is moles of solute per liter of solution.
  • Rearranged: n = M × V and m = M × V × (molar mass).
  • Prepare solutions in a volumetric flask, filling to the mark after the solute has dissolved.
  • Ionic compounds give ion concentrations equal to the compound molarity times the ion's subscript.
  • Always convert mL to L, and use total solution volume.

Next: Dilution: M₁V₁ = M₂V₂