Skip to content
Tutorials Center
My learning

Topics

Lesson 25 of 38 · Solutions and Concentration

Stoichiometry in Solutions and Titration

Combine molarity with mole ratios to solve precipitation and neutralization problems, and learn how a titration finds an unknown concentration, with calculators.

In solution chemistry you rarely weigh a reactant. Instead you measure a volume of a solution of known molarity. The stoichiometry is the same as before, but the first step changes: instead of n = m / M (mass to moles), you use n = M × V (concentration and volume to moles). Everything else, especially the balanced equation and the mole ratio, stays the same.

This lesson shows the full workflow with a precipitation problem and then introduces titration, a laboratory technique that uses solution stoichiometry to find an unknown concentration.

The workflow

flowchart LR
    A["Volume and molarity<br/>of A"] --> B["Moles of A<br/>n = M x V"]
    B --> C["Mole ratio from<br/>balanced equation"]
    C --> D["Moles of B"]
    D --> E["Volume of B<br/>V = n / M<br/>or mass of B"]

From a solution of A to a quantity of B.

Always convert volumes to liters before multiplying (or keep mL and use mmol; 1 mmol = 0.001 mol, and mmol = M × mL).

Worked example: a precipitation reaction

Lead(II) nitrate reacts with potassium iodide to make a bright yellow precipitate of lead(II) iodide:

Pb(NO₃)₂(aq) + 2 KI(aq) → PbI₂(s) + 2 KNO₃(aq)

You mix 50.0 mL of 0.100 M Pb(NO₃)₂ with 50.0 mL of 0.300 M KI. What mass of PbI₂ forms?

Moles of each reactant:

  • Pb(NO₃)₂: 0.100 mol/L × 0.0500 L = 0.00500 mol
  • KI: 0.300 mol/L × 0.0500 L = 0.0150 mol

Limiting reagent: Pb(NO₃)₂ supports 0.00500 / 1 = 0.00500 recipes; KI supports 0.0150 / 2 = 0.00750 recipes. So Pb(NO₃)₂ is limiting.

Product: 0.00500 mol PbI₂ (ratio 1 : 1). Molar mass of PbI₂ = 207.2 + 2 × 126.90 = 461.0 g/mol. Mass = 0.00500 × 461.0 = about 2.31 g.

Leftover KI: 0.0150 - 2 × 0.00500 = 0.00500 mol.

Python Precipitation calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Neutralization with volumes

Sodium hydroxide neutralizes sulfuric acid:

H₂SO₄ + 2 NaOH → Na₂SO₄ + 2 H₂O

What volume of 0.250 M NaOH neutralizes 20.0 mL of 0.100 M H₂SO₄?

  • Moles of H₂SO₄: 0.100 × 0.0200 = 0.00200 mol.
  • Moles of NaOH needed (ratio 2 : 1): 0.00400 mol.
  • Volume of NaOH: 0.00400 mol / 0.250 mol/L = 0.0160 L = 16.0 mL.
Python Volume needed for neutralization

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Titration: finding an unknown concentration

A titration adds a solution of known concentration (the titrant, from a burette) to a measured volume of the unknown solution (the analyte, in a flask) until the reaction is exactly complete. That point is the equivalence point, where the moles of titrant added match the moles of analyte according to the balanced equation. In practice you see it as the end point, when an indicator changes color; a well-chosen indicator makes the two almost the same.

Example: 25.00 mL of NaOH solution of unknown concentration is titrated with 0.1000 M HCl. The end point is reached after 21.40 mL of acid.

HCl + NaOH → NaCl + H₂O (ratio 1 : 1)

  • Moles of HCl: 0.1000 × 0.02140 = 0.002140 mol.
  • Moles of NaOH = 0.002140 mol.
  • Concentration of NaOH: 0.002140 / 0.02500 = 0.0856 M.

Good technique matters: rinse the burette with the titrant, read the meniscus at eye level, add the titrant drop by drop near the end point, and repeat until you get concordant results (volumes that agree within about 0.10 mL).

Python Titration calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

This lesson describes the technique and calculation only. The titre values above are invented teaching numbers, not data from an experiment.

Common mistakes

  • Forgetting the mole ratio when the coefficients are not 1 : 1 (for example H₂SO₄ and NaOH).
  • Mixing mL and L in the same equation.
  • Using the total volume in a titration calculation: use the volume of the analyte sample only.
  • Ignoring the limiting reagent when two solutions are mixed.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. How do you get moles from a solution of known molarity?

    Molarity is moles per liter, so moles = molarity × volume in liters.
  2. 2. What volume of 0.100 M HCl neutralizes 30.0 mL of 0.100 M NaOH (1 : 1 reaction)?

    With equal molarities and a 1 : 1 ratio, equal volumes are needed.
  3. 3. What is the equivalence point of a titration?

    At the equivalence point the reactants are in exactly the stoichiometric ratio.
  4. 4. In H₂SO₄ + 2 NaOH → Na₂SO₄ + 2 H₂O, 0.0020 mol of H₂SO₄ needs how many moles of NaOH?

    The ratio is 2 mol NaOH to 1 mol H₂SO₄, so 0.0020 × 2 = 0.0040 mol.

Summary

  • Moles in solution: n = M × V (volume in liters).
  • Use the balanced equation's mole ratio exactly as for masses.
  • With two solutions, find the limiting reagent before calculating product.
  • A titration finds an unknown concentration by reaching the equivalence point, shown by an indicator at the end point.
  • Average concordant titres and keep track of units.

Next: Other Concentration Units: Percent, ppm and Molality