Skip to content
Tutorials Center
My learning

Topics

Lesson 36 of 38 · Projects and Practice

Practice Set 1: Limiting Reagents and Yield

Six worked-answer practice problems on limiting reagents, excess, percent yield, purity and solution reactions, with a checker you can run to compare your answers.

The best way to learn stoichiometry is to solve problems. This practice set contains six problems on limiting reagents, excess, yield, purity and solution reactions. Try each one on paper first, with a calculator, before you look at the answers or run the checker. Use these atomic masses (g/mol): H 1.008, C 12.011, N 14.007, O 15.999, Ca 40.078, Fe 55.845, Cl 35.45, Ag 107.868.

Work in this order each time: balanced equation, moles, divide by coefficients, limiting reagent, product, then percent yield if needed. The earlier lessons of this chapter (what is a limiting reagent, the step-by-step method, excess reagent, yield) are your reference.

The problems

Problem 1: ammonia oxidation. In the first step of making nitric acid, ammonia burns in oxygen:

4 NH₃ + 5 O₂ → 4 NO + 6 H₂O

A reactor receives 34.0 g of NH₃ and 64.0 g of O₂. (a) Which reactant is limiting? (b) What mass of NO can form? (c) How many moles of the other reactant are left?

Problem 2: iron from its ore. In a blast furnace, iron(III) oxide is reduced by carbon monoxide:

Fe₂O₃ + 3 CO → 2 Fe + 3 CO₂

From 100.0 g of Fe₂O₃ (molar mass 159.69 g/mol) a furnace operator collects 62.0 g of iron. What are the theoretical yield and the percent yield? Assume CO is in excess.

Problem 3: impure limestone. A 25.0 g sample of limestone is 80.0 % CaCO₃ by mass. It is heated: CaCO₃ → CaO + CO₂. What mass of CO₂ is released?

Problem 4: a silver chloride precipitate. 2 AgNO₃ + CaCl₂ → 2 AgCl + Ca(NO₃)₂. You mix 40.0 mL of 0.200 M AgNO₃ with 30.0 mL of 0.150 M CaCl₂. (a) Which reagent is limiting? (b) What mass of AgCl (143.32 g/mol) precipitates?

Problem 5: working backward. A synthesis has a typical percent yield of 75.0 %. How many grams of reactant A (molar mass 80.0 g/mol) must you start with to make 12.0 g of product B (molar mass 120.0 g/mol), if the equation is A → B with a 1 : 1 ratio?

Problem 6: three-step synthesis. A product is made in three steps with yields 92 %, 85 % and 70 %. What is the overall yield, and how much starting material (in moles) do you need to obtain 0.200 mol of final product if every step is 1 : 1?

Work it out, then check

The checker below solves every problem with code. It is a verification tool: first solve each problem yourself, then compare.

Python Answer checker for Practice Set 1

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Worked notes on the trickier points

  • Problem 1: compare n / coefficient, not raw moles. Here the masses are very close to a 4 : 5 mole ratio, so rounding too early can mislead you.
  • Problem 2: the theoretical yield uses the 1 : 2 ratio between Fe₂O₃ and Fe. Each formula unit of Fe₂O₃ holds two iron atoms.
  • Problem 3: purity first. Only 80.0 % of the 25.0 g, that is 20.0 g, is CaCO₃.
  • Problem 4: convert volumes to liters before multiplying by molarity. The ratio is 2 : 1, so AgNO₃ gives n / 2.
  • Problem 5: the percent yield is applied to the product, so divide the target by 0.750 to find the theoretical amount needed.
  • Problem 6: overall yield is the product of the individual fractions, and the starting moles equal the target divided by that product.
Python Make your own practice problem

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 3 questions

of 3 answered You scored / 3 · perfect!

  1. 1. What should you do first in any limiting-reagent problem?

    The coefficients of the balanced equation give the mole ratios used in every later step.
  2. 2. A sample is 80.0 % pure and weighs 25.0 g. How much pure compound does it contain?

    25.0 g × 0.800 = 20.0 g.
  3. 3. To make 12.0 g of product with a 75 % yield, you should plan for a theoretical yield of:

    Theoretical = 12.0 / 0.75 = 16.0 g.

Summary

  • Always balance, convert to moles, divide by coefficients and compare.
  • Apply purity to the starting material and percent yield to the product.
  • In solution problems, use n = M × V in liters.
  • Overall yield of several steps is the product of the individual yields.
  • Verify with units and with the conservation of mass.

Next: Practice Set 2: Solutions and Gases