Skip to content
Tutorials Center
My learning

Topics

Lesson 27 of 38 · Reaction Types

Synthesis and Decomposition Reactions

Recognize synthesis (combination) and decomposition reactions, write and balance their equations, and use stoichiometry to predict mass changes, with calculators.

Thousands of reactions exist, but most of them fall into a small number of patterns. Learning the patterns helps you predict the products of a reaction before you try it, and it makes balancing equations quicker. In this lesson you will meet the two simplest patterns, which are opposites of each other: synthesis (building up) and decomposition (breaking down).

Synthesis (combination) reactions

In a synthesis reaction, two or more reactants combine to form one product.

A + B → AB

Common cases:

  • Two elements form a compound: 2 Na + Cl₂ → 2 NaCl (sodium chloride, table salt). 2 Mg + O₂ → 2 MgO. N₂ + 3 H₂ → 2 NH₃.
  • A metal oxide plus water gives a base: CaO + H₂O → Ca(OH)₂ (calcium oxide, "quicklime", gives calcium hydroxide).
  • A nonmetal oxide plus water gives an acid: SO₃ + H₂O → H₂SO₄.
  • Two compounds combine: CaO + CO₂ → CaCO₃.

A good clue is that you have several reactants but only one product. The reaction usually releases energy, since new bonds form.

Metal and nonmetal elements combine in predictable ratios because the ions must balance in charge. Magnesium forms Mg²⁺ and oxygen forms O²⁻, so the formula is MgO (one of each). Aluminum forms Al³⁺ and oxygen O²⁻, so the formula is Al₂O₃ (2 × 3 = 3 × 2 charge units).

Decomposition reactions

A decomposition reaction is the reverse pattern: one reactant breaks into two or more simpler products.

AB → A + B

Decomposition usually needs energy, such as heat, light or electricity:

  • Thermal decomposition of carbonates: CaCO₃ → CaO + CO₂ (limestone heated strongly; this is how lime is made).
  • Decomposition of water by electricity (electrolysis): 2 H₂O → 2 H₂ + O₂.
  • Hydrogen peroxide: 2 H₂O₂ → 2 H₂O + O₂. A catalyst such as manganese(IV) oxide speeds it up, though it is not consumed.
  • Potassium chlorate: 2 KClO₃ → 2 KCl + 3 O₂, heated, with MnO₂ as catalyst.
  • Sodium bicarbonate (baking soda): 2 NaHCO₃ → Na₂CO₃ + H₂O + CO₂.
flowchart LR
    subgraph S["Synthesis"]
        A1["A"] --> P1["AB"]
        B1["B"] --> P1
    end
    subgraph D["Decomposition"]
        P2["AB"] --> A2["A"]
        P2 --> B2["B"]
    end

Synthesis builds one product from several reactants; decomposition does the opposite.

Predicting the mass lost on heating

Decomposition problems often involve a solid that loses a gas. Because the gas escapes, the solid's mass drops. You can use the balanced equation to predict how much.

Example: 10.00 g of sodium bicarbonate is heated until it has fully decomposed.

2 NaHCO₃ → Na₂CO₃ + H₂O + CO₂

  • Molar masses: NaHCO₃ = 22.99 + 1.008 + 12.01 + 3 × 16.00 = 84.01 g/mol; Na₂CO₃ = 105.99 g/mol; CO₂ = 44.01 g/mol; H₂O = 18.02 g/mol.
  • Moles of NaHCO₃: 10.00 / 84.01 = 0.1190 mol.
  • Na₂CO₃ formed: 0.1190 / 2 = 0.0595 mol, which is 0.0595 × 105.99 = about 6.31 g.
  • Mass lost as CO₂ and water vapor: 10.00 - 6.31 = about 3.69 g.
Python Mass remaining after thermal decomposition

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The check at the end confirms conservation of mass: the solid left plus the gases lost equals the starting mass.

Volume of gas released

Gas products can be measured too. If the O₂ from 5.00 g of KClO₃ is collected, how many moles form?

2 KClO₃ → 2 KCl + 3 O₂

KClO₃ has a molar mass of 39.10 + 35.45 + 3 × 16.00 = 122.55 g/mol, so 5.00 g is 0.04080 mol. The ratio O₂ : KClO₃ = 3 : 2, so O₂ = 0.04080 × 3/2 = 0.06120 mol, which is 1.96 g of O₂ (at 32.00 g/mol). You will turn moles of gas into volumes in the gas-law chapter.

Python Oxygen from potassium chlorate

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Recognizing the pattern

Ask yourself: how many substances are on each side?

Reactants Products Likely type
Two or more One Synthesis
One Two or more Decomposition

Some reactions fit both descriptions from different angles. For example, the decomposition of carbonic acid, H₂CO₃ → H₂O + CO₂, is the reverse of the synthesis H₂O + CO₂ → H₂CO₃. Many reactions are reversible, and the same equation can be read in either direction depending on conditions.

Common mistakes

  • Wrong formulas for ionic products. Balance charges first: aluminum oxide is Al₂O₃, not AlO.
  • Forgetting diatomic elements. H₂, N₂, O₂, F₂, Cl₂, Br₂ and I₂ are diatomic when free.
  • Calling a catalyst a reactant. MnO₂ in 2 H₂O₂ → 2 H₂O + O₂ appears above or below the arrow, not in the balanced equation.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Which equation is a decomposition reaction?

    One reactant (CaCO₃) breaks into two products.
  2. 2. What is the correct formula for the compound of aluminum and oxygen?

    Al³⁺ and O²⁻ combine in a 2 : 3 ratio so that the total charge is zero.
  3. 3. In 2 H₂O₂ → 2 H₂O + O₂, what is the role of MnO₂ added to the solution?

    A catalyst speeds up a reaction without being used up.
  4. 4. A solid loses mass on strong heating because:

    Mass is conserved overall; the missing mass left the solid as gas.

Summary

  • Synthesis: several reactants combine into one product (A + B → AB).
  • Decomposition: one compound breaks into simpler substances (AB → A + B), usually with heat, light or electricity.
  • Check charge balance when writing ionic formulas and remember the diatomic elements.
  • Use mole ratios to predict masses of solid left and gas released; the total mass is conserved.
  • A catalyst changes the rate but is not a reactant or product.

Next: Single and Double Displacement Reactions