Skip to content
Tutorials Center
My learning

Topics

Lesson 26 of 38 ยท Solutions and Concentration

Other Concentration Units: Percent, ppm and Molality

Learn mass percent, volume percent, parts per million, molality and mole fraction, and convert between them and molarity using density, with calculators.

Molarity is not the only way to describe how much is dissolved. Different jobs call for different units. A pharmacist might quote a percent, an environmental scientist reports parts per million, and a physical chemist studying freezing points prefers molality. In this lesson you will learn the main alternatives and how to convert one to another.

Mass percent

Mass percent (also called weight percent, w/w) is the mass of solute as a percentage of the total mass of the solution:

mass percent = (mass of solute / mass of solution) ร— 100 %

Example: a solution is made from 5.0 g of salt and 95.0 g of water. The solution mass is 100.0 g, so the mass percent is 5.0 %.

Mass percent does not change with temperature, because masses do not expand. That is why labels on household chemicals often use it.

Volume percent

For liquid mixtures, volume percent (v/v) is common:

volume percent = (volume of solute / volume of solution) ร— 100 %

A drink with 12 % alcohol by volume contains 12 mL of ethanol in each 100 mL. Volumes of liquids do not always add exactly (mixing ethanol and water gives a little less than the sum), so the volume of the final solution is what counts.

Parts per million and parts per billion

For very dilute solutions, percent gives awkward decimals. Parts per million (ppm) and parts per billion (ppb) are used instead:

ppm = (mass of solute / mass of solution) ร— 1,000,000

ppb = (mass of solute / mass of solution) ร— 1,000,000,000

For dilute aqueous solutions, 1 L of solution has a mass very close to 1 kg, so 1 ppm โ‰ˆ 1 mg of solute per liter and 1 ppb โ‰ˆ 1 ยตg/L. This shortcut works only for dilute water-based solutions.

Example: a 2.0 L water sample contains 0.0060 g of dissolved fluoride. That is 6.0 mg in 2.0 L, so 3.0 mg/L, or about 3.0 ppm.

Python Percent and ppm calculator

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Molality

Molality (symbol m, unit mol/kg) is moles of solute per kilogram of solvent:

molality = moles of solute / kilograms of solvent

Unlike molarity, it uses the mass of the solvent only, so it does not change with temperature. That makes it the preferred unit for properties that depend on concentration across a temperature range, such as boiling-point elevation and freezing-point depression.

Example: dissolve 10.0 g of NaOH (40.00 g/mol) in 200.0 g of water.

  • Moles: 10.0 / 40.00 = 0.250 mol.
  • Kilograms of solvent: 0.2000 kg.
  • Molality: 0.250 / 0.2000 = 1.25 mol/kg.

Take care with symbols: capital M is molarity (per liter of solution), lowercase m is molality (per kilogram of solvent).

Mole fraction

The mole fraction X of a component is its moles divided by the total moles of all components. It has no unit, and all mole fractions in a mixture add up to 1.

Example: 1.00 mol of ethanol mixed with 4.00 mol of water. X(ethanol) = 1.00 / 5.00 = 0.200, X(water) = 0.800.

Converting between units with density

To switch between molarity and mass-based units you need the density of the solution. The trick is to choose a convenient amount, usually 1.000 L of solution, and work out the masses.

Example: a stock hydrochloric acid solution is 36.5 % HCl by mass and has a density of 1.18 g/mL. What is its molarity?

  1. Take 1.000 L = 1000 mL of solution. Its mass is 1000 ร— 1.18 = 1180 g.
  2. Mass of HCl: 0.365 ร— 1180 = 430.7 g.
  3. Moles of HCl (36.46 g/mol): 430.7 / 36.46 = 11.81 mol.
  4. Molarity = 11.81 mol / 1.000 L, so about 11.8 M.
Python Percent by mass to molarity

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Whenever a conversion problem looks confusing, pick a basis (1.000 L of solution, or 100.0 g of solution) and compute every quantity for that basis. The final ratio does not depend on your choice.

Choosing a unit

Unit Definition Handy for
Molarity (M) mol solute / L solution Reactions in solution, titrations
Molality (m) mol solute / kg solvent Properties that depend on temperature
Mass percent g solute / 100 g solution Labels, industry
Volume percent mL solute / 100 mL solution Liquid mixtures
ppm, ppb per million or billion by mass Trace amounts, water quality
Mole fraction mol component / total mol Gas mixtures, vapor pressure
Python Mole fraction and molality for a mixture

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. What is the mass percent of a solution made from 15 g of solute and 135 g of solvent?

    Solution mass is 150 g, and 15 / 150 ร— 100 % = 10 %.
  2. 2. For a dilute aqueous solution, 1 ppm is about:

    A liter of dilute solution weighs about 1 kg = 1,000,000 mg, so one part per million is about 1 mg.
  3. 3. Molality is defined using:

    Molality = moles of solute per kilogram of solvent.
  4. 4. Why is molality temperature-independent while molarity is not?

    Molarity depends on volume, which expands or contracts with temperature; molality depends only on masses.

Summary

  • Mass percent and volume percent express solute per 100 parts of solution.
  • ppm and ppb describe trace amounts; for dilute aqueous solutions 1 ppm โ‰ˆ 1 mg/L.
  • Molality (mol/kg solvent) does not change with temperature; molarity (mol/L solution) does.
  • Mole fraction is moles of one component over total moles.
  • Convert between units by choosing a basis and using the density.

Next: Synthesis and Decomposition Reactions