Skip to content
Tutorials Center
My learning

Topics

Lesson 32 of 38 · Gas Laws

Pressure and the Simple Gas Laws

Learn gas pressure units, why temperature must be in kelvin, and Boyle's, Charles's and Gay-Lussac's laws with worked examples and runnable calculators.

Gases are the easiest state of matter to describe with equations, because all gases behave in a similar way when their particles are far apart. A gas sample is described by four quantities: its pressure (P), volume (V), temperature (T) and the amount of gas in moles (n). The gas laws describe how these change together. In this lesson you will learn the three classic two-variable laws; the next lesson combines them into one equation.

What is gas pressure?

Gas particles move rapidly and hit the walls of their container. The force of these collisions per unit area is the pressure.

pressure = force / area

The SI unit is the pascal (Pa), equal to one newton per square meter. Because a pascal is small, other units are common:

Unit Equivalent
1 atmosphere (atm) 101,325 Pa = 101.325 kPa
1 atm 760 mmHg = 760 torr
1 bar 100,000 Pa = 100 kPa

Standard atmospheric pressure at sea level is 1 atm. Pressure gauges on tires usually show gauge pressure, the pressure above the atmosphere; gas-law calculations need absolute pressure (gauge plus atmospheric).

Temperature must be in kelvin

The gas laws work only with the Kelvin scale, whose zero is absolute zero, the lowest possible temperature:

T (K) = T (°C) + 273.15

Using °C gives wrong answers (and can even give a division by zero at 0 °C). Room temperature of 25 °C is 298.15 K; 0 °C is 273.15 K. In everyday problems 273 is often used instead of 273.15.

Boyle's law: pressure and volume

At constant temperature and amount of gas, pressure and volume are inversely proportional. Squeeze a gas into half the volume and its pressure doubles.

P₁V₁ = P₂V₂ (constant n, T)

Example: 5.0 L of gas at 1.0 atm is compressed at constant temperature until the pressure is 2.5 atm. New volume: V₂ = P₁V₁ / P₂ = (1.0 × 5.0) / 2.5 = 2.0 L.

Why? Smaller volume means particles hit the walls more often, so the pressure rises. This is how a syringe or a bicycle pump works.

Charles's law: volume and temperature

At constant pressure and amount of gas, volume is directly proportional to the absolute temperature.

V₁ / T₁ = V₂ / T₂ (constant n, P)

Example: a balloon of 3.00 L at 20 °C (293.15 K) is warmed to 80 °C (353.15 K) at constant pressure.

V₂ = V₁ × T₂ / T₁ = 3.00 × 353.15 / 293.15 = 3.61 L

Gay-Lussac's law: pressure and temperature

At constant volume and amount of gas, pressure is directly proportional to the absolute temperature.

P₁ / T₁ = P₂ / T₂ (constant n, V)

Example: a sealed rigid container holds gas at 100.0 kPa and 20 °C (293.15 K). Heated to 100 °C (373.15 K), P₂ = 100.0 × 373.15 / 293.15 = 127.3 kPa. This is why sealed spray cans carry a warning not to heat them.

Python Boyle, Charles and Gay-Lussac calculators

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Seeing the relationships

The three laws describe straight lines or a curve depending on how you plot them. Here you can plot all three at once.

Python Plot the gas laws

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Kinetic molecular picture

A simple model explains all three laws. Gas particles are tiny, far apart, in constant random motion and collide elastically. The average kinetic energy of the particles is proportional to the Kelvin temperature. Heat a gas and the particles hit the walls harder and more often (higher pressure), or push the walls outward (greater volume).

Common mistakes

  • Using Celsius. Always convert to kelvin first.
  • Mixing pressure units. Pressure units must be the same on both sides; volume units too.
  • Mixing up direct and inverse. Boyle's law is inverse; Charles's and Gay-Lussac's laws are direct.
  • Using gauge pressure instead of absolute pressure.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A gas at 2.0 atm and 4.0 L is expanded at constant temperature to 8.0 L. What is the new pressure?

    P₂ = P₁V₁ / V₂ = (2.0 × 4.0) / 8.0 = 1.0 atm (Boyle's law).
  2. 2. Which temperature must be used in gas-law equations?

    The laws rely on proportionality to absolute temperature, which is measured in kelvin.
  3. 3. Which law says V/T is constant at constant pressure?

    That is Charles's law.
  4. 4. Which pair is directly proportional?

    Gay-Lussac's law: pressure is directly proportional to absolute temperature at constant volume.

Summary

  • Pressure is force per area; 1 atm = 101.325 kPa = 760 mmHg.
  • Temperatures must be in kelvin: T = °C + 273.15.
  • Boyle: P₁V₁ = P₂V₂. Charles: V₁/T₁ = V₂/T₂. Gay-Lussac: P₁/T₁ = P₂/T₂.
  • Use consistent units on both sides, and absolute (not gauge) pressure.
  • The kinetic molecular model explains why these relationships exist.

Next: The Combined and Ideal Gas Laws