Skip to content
Tutorials Center
My learning

Topics

Lesson 37 of 38 · Projects and Practice

Practice Set 2: Solutions and Gases

Six practice problems on molarity, dilution, titration, the ideal gas law, gas stoichiometry and partial pressure, with a runnable checker and worked hints.

This second practice set covers the two big themes of the later chapters: solutions (molarity, dilution, titration) and gases (the ideal gas law, gas stoichiometry and partial pressures). Solve each problem by hand first. Then run the checker to compare, and read the hints for any problem that went differently.

Useful constants: R = 0.08206 L·atm/(mol·K), T(K) = °C + 273.15, 1 atm = 760 mmHg. Atomic masses: H 1.008, C 12.011, O 15.999, Na 22.990, Mg 24.305, S 32.06. Related lessons: molarity, dilution, titration, the ideal gas law, gas stoichiometry and Dalton's law.

The problems

Problem 1: molarity. 20.0 g of sodium hydroxide is dissolved in water and made up to 500.0 mL. What is the molarity?

Problem 2: dilution. You need 100.0 mL of 0.250 M HCl. How many mL of 2.00 M stock acid do you measure out?

Problem 3: titration. 20.00 mL of a sulfuric acid solution is neutralized by 32.50 mL of 0.1000 M NaOH. H₂SO₄ + 2 NaOH → Na₂SO₄ + 2 H₂O. What is the molarity of the acid?

Problem 4: ideal gas law. What volume does 0.250 mol of an ideal gas occupy at 27 °C (300.15 K) and 1.50 atm?

Problem 5: gas stoichiometry. 5.00 g of magnesium reacts with excess hydrochloric acid: Mg + 2 HCl → MgCl₂ + H₂. What volume of hydrogen forms at 25 °C and 1.00 atm?

Problem 6: gas over water. Hydrogen is collected over water at 20 °C and 750 mmHg. The vapor pressure of water at 20 °C is about 17.5 mmHg. What is the pressure of the dry hydrogen in mmHg and atm?

Run the checker

Python Answer checker for Practice Set 2

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Hints and common slips

  • Problem 1: molar mass of NaOH is about 40.00 g/mol, so 20.0 g is 0.500 mol. Divide by 0.5000 L, not by 500.
  • Problem 2: use M₁V₁ = M₂V₂ with the stock as 1. The answer must be far smaller than 100.0 mL; if it is larger, you inverted the formula.
  • Problem 3: the mole ratio is 2 NaOH to 1 H₂SO₄. Forgetting it doubles your answer.
  • Problem 4: V = nRT / P. Keep T in kelvin.
  • Problem 5: Mg is limiting because HCl is in excess. Convert to moles, use a 1 : 1 ratio, then use the ideal gas law at the stated conditions (not 22.4 L/mol, since 25 °C is not 0 °C).
  • Problem 6: subtract the vapor pressure, then convert units by dividing by 760 mmHg per atm.

A solution-and-gas combined problem

Real exam questions often mix topics. Here is one that links titration, solutions and gases.

A 0.500 g sample of impure sodium carbonate is dissolved in water and reacts completely with hydrochloric acid: Na₂CO₃ + 2 HCl → 2 NaCl + H₂O + CO₂. The CO₂ released is measured as 0.0950 L at 25 °C and 1.00 atm. What is the percent purity of the sample?

Plan: moles of CO₂ from the gas law, moles of Na₂CO₃ from the 1 : 1 ratio, mass of pure Na₂CO₃ (105.99 g/mol), then percent purity.

Python Purity from a gas volume

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Estimating before you calculate

A habit of expert problem solvers is to estimate first. A few quick checks:

  • A 1 mol sample of gas at room temperature and 1 atm is about 24 L, so 0.25 mol should be about 6 L at that pressure, and more at a lower pressure.
  • Dilution always lowers concentration. Mixing a solution with water gives an answer lower than the stock.
  • A titration endpoint volume close to the expected one means your calculation is on the right track.
Python A quick estimation table

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. In the titration of H₂SO₄ with NaOH, 0.003250 mol NaOH was used. How many moles of H₂SO₄ reacted?

    The ratio is 2 NaOH to 1 H₂SO₄, so 0.003250 / 2 = 0.001625 mol.
  2. 2. For a gas collected over water, the pressure of the dry gas is found by:

    P_gas = P_atm - P_water vapor.
  3. 3. Approximately what volume does 1 mol of ideal gas occupy at 25 °C and 1 atm?

    V = RT/P = 0.08206 × 298.15 / 1.00 = about 24.5 L.
  4. 4. Why use the ideal gas law rather than 22.4 L/mol in Problem 5?

    The molar volume 22.4 L/mol is for 0 °C and 1 atm only.

Summary

  • Convert volumes to liters; keep temperature in kelvin.
  • Dilution, titration and gas problems share the same core: moles, mole ratio, then back to the requested unit.
  • Estimate first to catch large errors, and verify with units.
  • Combined problems chain several of these steps.

Next: Project: Build a Stoichiometry Calculator