Skip to content
Tutorials Center
My learning

Topics

Lesson 21 of 38 Β· Limiting Reagents and Yield

Excess Reagent: How Much Is Left Over?

Calculate how much excess reagent remains after a reaction, with worked mass examples, a mass-balance check and a runnable before-and-after table.

Once you know which reactant is limiting, a natural follow-up question is: how much of the other reactant is left when everything stops? In a lab this tells you what you will find in the flask afterward and how much of a chemical is wasted. In industry it tells you how much surplus must be recovered or disposed of safely.

The answer is a simple subtraction: excess left = amount you started with - amount that reacted. The only trick is finding the amount that reacted, and that comes from the limiting reagent.

The method

  1. Find the limiting reagent (previous lesson).
  2. Use the limiting reagent's moles and the mole ratio to find how many moles of the excess reagent reacted.
  3. Subtract from the starting moles of the excess reagent.
  4. Convert to grams if needed with m = n Γ— M.

Never use the excess reagent's own starting amount to decide how much reacts. It only reacts as far as the limiting reagent allows.

Worked example: aluminum and chlorine again

2 Al + 3 Clβ‚‚ β†’ 2 AlCl₃

Start: 10.0 g Al (26.98 g/mol) and 20.0 g Clβ‚‚ (70.90 g/mol). From the last lesson, Clβ‚‚ is limiting.

  • Moles at start: Al = 0.3706 mol; Clβ‚‚ = 0.2821 mol.
  • Clβ‚‚ reacts completely: 0.2821 mol.
  • Al that reacts: 0.2821 mol Clβ‚‚ Γ— (2 mol Al / 3 mol Clβ‚‚) = 0.1881 mol.
  • Al left: 0.3706 - 0.1881 = 0.1825 mol.
  • Mass of Al left: 0.1825 mol Γ— 26.98 g/mol = about 4.92 g (4.93 g if you keep more digits).

As a check, the Al that reacted weighs 0.1881 Γ— 26.98 = 5.07 g, and 10.0 - 5.07 = 4.93 g. The small difference comes from rounding the moles; with more digits both routes give 4.93 g.

Python Before-and-after table for a reaction

Press Run (or Ctrl + Enter) to see the result here.

Program input Β· what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The totals match: mass is conserved. The reactants started at 30.0 g in total, and the reactants left plus the product formed also add up to 30.0 g (within rounding of the molar masses). This is a good check on any limiting-reagent problem. If the masses do not add up, there is an arithmetic slip.

Use the mass check at the end of every problem: total mass before = total mass after for a closed system. It catches most errors in seconds.

Worked example: a neutral check with exact numbers

Use easy numbers to see the pattern. For Nβ‚‚ + 3 Hβ‚‚ β†’ 2 NH₃, suppose you start with 2.0 mol Nβ‚‚ and 4.5 mol Hβ‚‚.

  • Nβ‚‚ supports 2.0 / 1 = 2.0 recipes; Hβ‚‚ supports 4.5 / 3 = 1.5 recipes. Hβ‚‚ is limiting.
  • Extent of reaction: 1.5 recipes.
  • Nβ‚‚ reacted: 1.5 Γ— 1 = 1.5 mol, so 2.0 - 1.5 = 0.5 mol Nβ‚‚ is left.
  • Hβ‚‚ left: 4.5 - 1.5 Γ— 3 = 0.
  • NH₃ formed: 1.5 Γ— 2 = 3.0 mol.

In one glance you can see why the "extent" idea is useful: every species changes by its coefficient times the same number, 1.5.

Species Start (mol) Change (mol) End (mol)
Nβ‚‚ 2.0 -1.5 0.5
Hβ‚‚ 4.5 -4.5 0
NH₃ 0 +3.0 3.0

This kind of table is often called a mole table or an ICE-style table (initial, change, end). You will see it again when studying equilibrium.

Python Mole table with an extent of reaction

Press Run (or Ctrl + Enter) to see the result here.

Program input Β· what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Why excess is often deliberate

  • Cost: it is cheaper to use plenty of a cheap reactant (air, water) than to risk wasting an expensive one.
  • Completeness: a surplus pushes a reaction toward completion so the valuable reagent is fully used.
  • Safety: a toxic reagent is kept as the limiting one so none remains in the product.

The price is waste and a separation step: unreacted excess must be removed from the product.

Common mistakes

  • Subtracting the limiting reagent's mass from the excess reagent's mass. Convert to moles and use the ratio.
  • Forgetting that the limiting reagent has zero left (apart from experimental losses).
  • Skipping the mass-conservation check.

Check your understanding

Quick check Β· 3 questions

of 3 answered You scored / 3 Β· perfect!

  1. 1. How do you find the excess reagent that reacted?

    Only the limiting reagent determines how far the reaction goes, so the amount of excess that reacts follows from its moles and the ratio.
  2. 2. Nβ‚‚ + 3 Hβ‚‚ β†’ 2 NH₃: 2.0 mol Nβ‚‚ and 4.5 mol Hβ‚‚ react. How many moles of Nβ‚‚ remain?

    Hβ‚‚ limits (1.5 recipes), so 1.5 mol Nβ‚‚ reacts and 2.0 - 1.5 = 0.5 mol remains.
  3. 3. What should total mass do in a closed system during a reaction?

    The law of conservation of mass: atoms are rearranged, not created or destroyed.

Summary

  • Excess left = amount at the start minus the amount that reacted.
  • The amount that reacted comes from the limiting reagent and the mole ratio.
  • A mole table (start, change, end) organizes everything: change = coefficient Γ— extent.
  • Total mass before and after a reaction must match; use this as a check.
  • Chemists often use a deliberate excess of a cheap reactant.

Next: Theoretical, Actual and Percent Yield