Skip to content
Tutorials Center
My learning

Topics

Lesson 36 of 86 ยท Algebra, Geometry and Calendars

Mensuration: Volumes and Surface Areas

Learn volume and surface area formulas for cuboids, cylinders, cones and spheres, and solve melting and recasting problems with a runnable calculator.

Solid shapes have two measures that people mix up. Volume is the space inside, measured in cubic units (cmยณ, mยณ, litres). Surface area is the total outside covering, measured in square units. Paint needed for a box is a surface-area question; water in a tank is a volume question. If you can name which one is asked, half the work is done.

This lesson builds on Mensuration: Areas and Perimeters. We cover the four solids that appear most in tests (cuboid and cube, cylinder, cone, sphere and hemisphere), then the classic trick of melting one solid and recasting it into others, where the key idea is that volume stays the same.

Cuboid and cube

A cuboid has length l, breadth b and height h.

  • Volume = l ร— b ร— h
  • Total surface area = 2(lb + bh + hl)
  • Space diagonal = โˆš(lยฒ + bยฒ + hยฒ)

A cube of side a is the special case l = b = h = a: volume aยณ, total surface area 6aยฒ, space diagonal aโˆš3. If a cube has surface area 150, then 6aยฒ = 150, so aยฒ = 25, a = 5, and the volume is 125.

A rectangular tank 5 m ร— 4 m ร— 3 m holds 60 mยณ. Since 1 mยณ = 1000 litres, that is 60,000 litres. Unit conversions are the usual trap: 1 litre = 1000 cmยณ.

Cylinder

A cylinder has radius r and height h. Imagine unrolling the curved side: it becomes a rectangle of width 2ฯ€r (the circumference) and height h.

  • Curved (lateral) surface area = 2ฯ€rh
  • Total surface area = 2ฯ€r(r + h) (curved part plus two circular ends)
  • Volume = ฯ€rยฒh

For r = 7 and h = 10 with ฯ€ = 22/7: volume = 22/7 ร— 49 ร— 10 = 1540, curved area = 2 ร— 22/7 ร— 7 ร— 10 = 440, total area = 440 + 2 ร— 154 = 748.

A hollow cylinder (a pipe) with outer radius R and inner radius r has material volume ฯ€h(Rยฒ โˆ’ rยฒ).

Cone

A cone has base radius r, height h and slant height l, related by lยฒ = rยฒ + hยฒ.

  • Curved surface area = ฯ€rl
  • Total surface area = ฯ€r(r + l)
  • Volume = 1/3 ฯ€rยฒh

Key fact: a cone's volume is exactly one third of the cylinder with the same base and height. For r = 7 and h = 24, the slant height is โˆš(49 + 576) = โˆš625 = 25, so the curved area is 22/7 ร— 7 ร— 25 = 550 and the volume is 1/3 ร— 22/7 ร— 49 ร— 24 = 1232.

Sphere and hemisphere

For a sphere of radius r:

  • Surface area = 4ฯ€rยฒ
  • Volume = 4/3 ฯ€rยณ

A hemisphere is half a sphere:

  • Curved surface area = 2ฯ€rยฒ
  • Total surface area = 3ฯ€rยฒ (curved part plus the flat circular face ฯ€rยฒ)
  • Volume = 2/3 ฯ€rยณ

For r = 21: surface area = 4 ร— 22/7 ร— 441 = 5544; volume = 4/3 ร— 22/7 ร— 9261 = 38,808.

Solid Volume Curved area Total area
Cuboid lbh 2h(l + b) 2(lb + bh + hl)
Cylinder ฯ€rยฒh 2ฯ€rh 2ฯ€r(r + h)
Cone 1/3 ฯ€rยฒh ฯ€rl ฯ€r(r + l)
Sphere 4/3 ฯ€rยณ 4ฯ€rยฒ 4ฯ€rยฒ
Hemisphere 2/3 ฯ€rยณ 2ฯ€rยฒ 3ฯ€rยฒ

Scaling in three dimensions

If every length is multiplied by k, surface area is multiplied by kยฒ, and volume by kยณ. Double the radius of a sphere and the volume becomes 8 times as large while the area becomes 4 times as large. Increase every side of a cube by 10 percent and the volume grows by 1.1ยณ = 1.331 times, that is 33.1 percent.

Melting and recasting

When a solid is melted and made into other solids, no material is lost, so:

volume of original = (number of new solids) ร— (volume of each new solid)

Example: a metal sphere of radius 9 cm is melted and recast into small cones of base radius 3 cm and height 9 cm. How many cones? Sphere volume = 4/3 ฯ€ ร— 729 = 972ฯ€. One cone = 1/3 ฯ€ ร— 9 ร— 9 = 27ฯ€. Number of cones = 972 / 27 = 36.

Notice that ฯ€ cancels, so you rarely need its value. Cancel ฯ€ first and use fractions; the arithmetic stays small.

flowchart LR
    A["Original solid<br/>volume V1"] --> B["Melt: volume unchanged"]
    B --> C["Recast into n solids<br/>each with volume V2"]
    C --> D["n = V1 / V2"]

In recasting problems, equate volumes and cancel the common factor pi.

The same idea works for water poured between containers, a pipe delivering water over time (flow volume = cross-section area ร— speed ร— time), and a solid dipped in a tank (water rises by the solid's volume / tank's base area).

Cutting and painting a cube

A cube of side 4 cm is painted on all faces and then cut into 1 cm cubes. That gives 4ยณ = 64 small cubes. Classify by how many painted faces each has:

  • 3 faces (corner cubes): 8
  • 2 faces (edge cubes, not corners): 12 edges ร— (4 โˆ’ 2) = 24
  • 1 face (face interiors): 6 faces ร— (4 โˆ’ 2)ยฒ = 24
  • 0 faces (hidden inside): (4 โˆ’ 2)ยณ = 8

For a cube cut into n pieces along each side, the counts are 8, 12(n โˆ’ 2), 6(n โˆ’ 2)ยฒ and (n โˆ’ 2)ยณ, and they always add up to nยณ.

flowchart TB
    A["Big cube cut into n x n x n"] --> B["3 painted faces: 8 corners"]
    A --> C["2 painted faces: 12 x (n-2)"]
    A --> D["1 painted face: 6 x (n-2) squared"]
    A --> E["0 painted faces: (n-2) cubed"]

The four groups together always make n cubed small cubes.

A solids calculator

The script below computes volumes and areas for the worked examples (with the real value of ฯ€ and with 22/7 for hand checks) and solves two recasting problems. Edit the numbers to explore.

JS Volume and surface area calculator

Press Run (or Ctrl + Enter) to see the console output here.

No output.

The second tool counts painted faces by brute force, so you can see the formulas hold for any size.

JS Painted cube counter

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Check your understanding

Quick check ยท 5 questions

of 5 answered You scored / 5 ยท perfect!

  1. 1. A cube has total surface area 150 sq cm. What is its volume?

    6a^2 = 150 gives a^2 = 25, so a = 5 and the volume is 5^3 = 125.
  2. 2. A cone has base radius 7 cm and height 24 cm. What is its curved surface area? (Use pi = 22/7.)

    Slant height = sqrt(49 + 576) = 25. Curved area = pi x r x l = (22/7) x 7 x 25 = 550.
  3. 3. A metal sphere of radius 9 cm is melted into cones with base radius 3 cm and height 9 cm. How many cones are made?

    Sphere volume = (4/3) pi x 729 = 972 pi. Each cone = (1/3) pi x 9 x 9 = 27 pi. 972 / 27 = 36.
  4. 4. The radius of a sphere is doubled. By what factor does its volume increase?

    Volume depends on r cubed, so doubling r multiplies the volume by 2^3 = 8.
  5. 5. A cube of side 5 cm is painted on all faces and cut into 1 cm cubes. How many small cubes have exactly one painted face?

    Each of the 6 faces has (5 - 2)^2 = 9 cubes with exactly one painted face, so 6 x 9 = 54.

Summary

  • Volume is space inside (cubic units); surface area is the outside covering (square units).
  • Cuboid: volume lbh, area 2(lb + bh + hl); cube: a cubed and 6a squared.
  • Cylinder: pi r squared h and 2 pi r (r + h); cone: one third of the matching cylinder, with l squared = r squared + h squared.
  • Sphere: 4/3 pi r cubed and 4 pi r squared; hemisphere total area is 3 pi r squared.
  • Scaling lengths by k scales area by k squared and volume by k cubed.
  • In melting and recasting, equate volumes and cancel pi; for a painted cube cut into n^3 pieces use 8, 12(n-2), 6(n-2)^2 and (n-2)^3.

Next: Clocks, where angles and relative motion replace volume formulas.