Skip to content
Tutorials Center
My learning

Topics

Lesson 35 of 86 ยท Algebra, Geometry and Calendars

Mensuration: Areas and Perimeters

Master area and perimeter formulas for triangles, quadrilaterals, circles and sectors, then solve path, carpet and wheel problems with a calculator.

Mensuration is the measurement of flat and solid shapes. In this lesson we stay in two dimensions: the perimeter is the distance around a shape (a length), and the area is the amount of surface it covers (a length times a length, so square units). Aptitude tests love mensuration because a handful of formulas unlocks many question types: fencing a field, tiling a floor, laying a path around a lawn, or counting how many times a wheel turns.

Most mistakes are not about formulas. They are about units (centimetres mixed with metres), about forgetting that a path adds its width on both sides, and about reading "radius" when the question gives "diameter". We will build the formulas, then practice the traps. For the three-dimensional versions, continue to Mensuration: Volumes and Surface Areas afterwards.

Terms you need first

  • Perimeter is the distance around a shape. Area is the surface it covers, in square units.
  • Scalene triangle: all three sides differ. Isosceles: two sides equal. Equilateral: all three equal (and every angle is 60 degrees). Right: one angle is 90 degrees.
  • Parallelogram: opposite sides are parallel and equal, so area = base x perpendicular height (not the slanted side). A rhombus is a parallelogram with four equal sides, and a rectangle is one with four right angles.
  • Trapezium: exactly one pair of parallel sides.
  • Radius is the distance from the centre of a circle to its edge, diameter = 2 x radius, circumference = 2 pi r.

Triangles

The basic rule is area = 1/2 ร— base ร— height, where the height is the perpendicular distance from the base to the opposite corner. Three other forms appear constantly.

  • Right triangle: the two short sides are base and height, so area = 1/2 ร— leg ร— leg.
  • Equilateral triangle with side a: area = (โˆš3 / 4) aยฒ, height = (โˆš3 / 2) a, perimeter = 3a.
  • Heron's formula when you know all three sides a, b, c: let s = (a + b + c) / 2 (the semi-perimeter), then area = โˆš(s(s โˆ’ a)(s โˆ’ b)(s โˆ’ c)).

Example: a triangle has sides 13, 14 and 15. Then s = 21, and the area is โˆš(21 ร— 8 ร— 7 ร— 6) = โˆš7056 = 84. Its height on the side of length 14 is 2 ร— 84 / 14 = 12.

The triples (3, 4, 5), (5, 12, 13), (8, 15, 17) and (7, 24, 25) are right triangles. Recognizing them saves a square root and tells you at once that the area is half the product of the two shorter sides.

Quadrilaterals

Shape Area Perimeter
Rectangle (l ร— b) l ร— b 2(l + b)
Square (side a) aยฒ or dยฒ/2 (d = diagonal) 4a
Parallelogram base ร— height 2(sum of adjacent sides)
Rhombus dโ‚ ร— dโ‚‚ / 2 4 ร— side
Trapezium (parallel sides a and b, height h) 1/2 (a + b) h sum of all four sides

A rhombus has equal sides and diagonals that cross at right angles, halving each other. So a rhombus with diagonals 16 and 12 has area 16 ร— 12 / 2 = 96, and each side is the hypotenuse of a right triangle with legs 8 and 6, which is 10. The perimeter is 40.

The diagonal of a rectangle is โˆš(lยฒ + bยฒ), and a square's diagonal is aโˆš2. If a question says the diagonal of a square is 10, the area is 10ยฒ / 2 = 50 without ever finding the side.

Circles and sectors

For a circle of radius r:

  • Circumference = 2ฯ€r = ฯ€d
  • Area = ฯ€rยฒ

Use ฯ€ = 22/7 when the radius is a multiple of 7, and ฯ€ = 3.14 only when told to. With r = 14, the circumference is 2 ร— 22/7 ร— 14 = 88 and the area is 22/7 ร— 196 = 616.

A sector is a slice cut by two radii enclosing an angle ฮธ (in degrees). It is the fraction ฮธ/360 of the whole circle:

  • Arc length = (ฮธ / 360) ร— 2ฯ€r
  • Sector area = (ฮธ / 360) ร— ฯ€rยฒ

For r = 21 and ฮธ = 60ยฐ, the fraction is 1/6. Arc length = 1/6 ร— 132 = 22, and the sector area = 1/6 ร— 1386 = 231.

flowchart LR
    A["Circle: area pi r squared"] --> B["Angle theta of the slice"]
    B --> C["Fraction = theta / 360"]
    C --> D["Sector area = fraction x area"]
    C --> E["Arc length = fraction x circumference"]

Both sector formulas are the same fraction applied to the full circle.

A ring (annulus) between radii R and r has area ฯ€(Rยฒ โˆ’ rยฒ), not ฯ€(R โˆ’ r)ยฒ. Always subtract the squares.

How scaling affects area

If every length of a shape is multiplied by k, the area is multiplied by kยฒ. Increase a circle's radius by 10 percent: the new area is 1.1ยฒ = 1.21 times the old one, an increase of 21 percent. Doubling a side of a square makes the area four times as large. This idea answers many "percentage change in area" questions in one line (see Percentage Change for successive changes).

Paths, borders and carpets

For a rectangle with a path, think of two rectangles and subtract.

  • Path outside a 40 m ร— 30 m lawn, 2 m wide: the outer rectangle is (40 + 4) ร— (30 + 4) = 44 ร— 34 = 1496. The lawn is 1200, so the path covers 296 square metres. Each dimension grows by twice the width.
  • Path inside a 40 m ร— 30 m rectangle, 2 m wide: the inner rectangle is (40 โˆ’ 4) ร— (30 โˆ’ 4) = 36 ร— 26 = 936, so the path covers 1200 โˆ’ 936 = 264.
  • Cross paths through the middle, each w wide (one parallel to each side): area = (l + b โˆ’ w) ร— w. For w = 2 on the same 40 ร— 30 field: (70 โˆ’ 2) ร— 2 = 136. The crossing square is counted once, which is why w is subtracted.
flowchart TB
    A["Path problem"] --> B{"Where is the path?"}
    B -->|Outside| C["Add 2w to each side, subtract inner area"]
    B -->|Inside| D["Subtract 2w from each side, subtract from outer area"]
    B -->|Crossing in the middle| E["Area = (l + b - w) x w"]

Pick the path type first, then the formula follows.

Carpets and tiles reduce to one idea: area covered = length ร— width, so the length of carpet needed = room area / carpet width. A room 12 m ร— 8 m has area 96 mยฒ. A carpet 75 cm wide (0.75 m) needs 96 / 0.75 = 128 m of carpet. Keep the same unit on both sides before dividing.

Wheels use the circumference. A wheel of diameter 70 cm has circumference 22/7 ร— 70 = 220 cm. To roll 1.1 km (110,000 cm) it must turn 110,000 / 220 = 500 times. The number of revolutions is always distance / circumference.

An area calculator you can run

This tool collects the formulas above and prints answers for the worked examples in this lesson, so you can check your own work. Change the inputs and compare with your pencil result.

JS Area and perimeter calculator

Press Run (or Ctrl + Enter) to see the console output here.

No output.

The next check explores how area depends on shape when the perimeter is fixed. It prints the area of rectangles with perimeter 40, showing that the square encloses the most.

JS Same perimeter, different areas

Press Run (or Ctrl + Enter) to see the console output here.

No output.

For a fixed perimeter, the rectangle with the greatest area is the square (here 10 ร— 10 = 100). This is the reason maximum-area fencing questions always end with equal sides.

Check your understanding

Quick check ยท 5 questions

of 5 answered You scored / 5 ยท perfect!

  1. 1. A triangle has sides 13 cm, 14 cm and 15 cm. What is its area?

    Semi-perimeter s = 21. Area = sqrt(21 x 8 x 7 x 6) = sqrt(7056) = 84.
  2. 2. The diagonals of a rhombus are 16 cm and 12 cm. What is its perimeter?

    Each side is the hypotenuse of a right triangle with legs 8 and 6, so the side is 10 and the perimeter is 4 x 10 = 40.
  3. 3. A 40 m by 30 m lawn has a 2 m wide path all around its outside. What is the area of the path?

    Outer rectangle (40 + 4) x (30 + 4) = 1496, lawn = 1200, so the path is 296 sq m.
  4. 4. What is the area of a sector of a circle with radius 21 cm and angle 60 degrees? (Use pi = 22/7.)

    The sector is 60/360 = 1/6 of the circle: 1/6 x (22/7) x 441 = 1/6 x 1386 = 231.
  5. 5. A wheel has diameter 70 cm. How many full turns does it make in 1.1 km? (Use pi = 22/7.)

    Circumference = (22/7) x 70 = 220 cm. 1.1 km = 110,000 cm. 110,000 / 220 = 500 turns.

Summary

  • Triangle area is 1/2 x base x height; Heron's formula covers three known sides.
  • Rhombus area is d1 x d2 / 2, and its diagonals bisect each other at right angles.
  • Circle: circumference 2 pi r, area pi r squared; a sector is the fraction theta/360 of both.
  • Scaling every length by k scales area by k squared (10 percent more radius gives 21 percent more area).
  • Outside paths add 2w to each dimension, inside paths subtract 2w, cross paths use (l + b - w) w.
  • Carpet length is room area divided by carpet width; wheel turns are distance divided by circumference.

Next: Mensuration: Volumes and Surface Areas, where the same ideas extend to cuboids, cylinders, cones and spheres.