Skip to content
Tutorials Center
My learning

Topics

Lesson 47 of 86 ยท Data Interpretation

Bar and Line Graph Data Interpretation

Read bar and line graphs fast: scales and axes, growth rates, absolute versus percent change, comparisons and tricks, with live charts to explore.

A table gives you every number exactly. A graph gives you the same numbers as shapes, and the exam expects you to read values off those shapes, then calculate. Bar graphs compare categories or periods; line graphs show how something moves over time. In both, the questions are the ones you already know from Table and Caselet Data Interpretation: totals, averages, ratios, growth. The new skill is reading the chart without error and without wasting time.

This lesson shows how to read the axes, how to compute growth from a graph, the difference between an absolute rise and a percentage rise, and a few speed tricks. Two live charts let you click and compare.

Reading a chart in 15 seconds

  1. Title and what is plotted. "Monthly output of two plants, in units (hundreds)".
  2. Axes and scale. What does one gridline mean: 5, 10, 20? Where does the vertical axis start? Not every axis starts at zero.
  3. Legend. Which color or line is which series? Mixing the two series up is the most common mistake in graph DI.
  4. Units. Thousands, percent, rupees, tonnes.
  5. Question first. Read the questions before you read values, so that you only extract the numbers you need.

Our running data: monthly output (in hundreds of units) of two plants, X and Y.

Month Jan Feb Mar Apr May Jun
Plant X 40 55 50 70 65 80
Plant Y 30 45 60 55 75 70

A grouped bar chart

Click any month group to read its values and the difference between the plants.

Grouped bar chart

From the chart (or the table) you can answer a family of questions:

  • Total and average. X's six-month output is 40 + 55 + 50 + 70 + 65 + 80 = 360, an average of 60. Y totals 335.
  • Who leads, and how often? X is ahead in Jan, Feb, Apr and Jun (four months); Y leads in Mar and May.
  • Comparison as a percent. In April, X exceeds Y by 15, which is 15 รท 55 โ‰ˆ 27.27% of Y (the base is the one you compare with).
flowchart LR
    A["Read values<br/>from bars"] --> B["Write them as<br/>a mini table"]
    B --> C["Apply the<br/>formula"]
    C --> D["Check units<br/>and base"]

Turn the picture into numbers first; then it is an ordinary calculation.

Growth rates from a graph

The growth formula is the same as for tables:

Percent growth = (new โˆ’ old) รท old ร— 100

Plant X grew from 40 in January to 80 in June: (80 โˆ’ 40) รท 40 = 1, which is 100%. Plant Y grew from 30 to 70: 40 รท 30 = 133.33%. Y's absolute rise (40) equals X's (40), but its percentage rise is larger because it started lower.

Absolute change versus percent change often disagree. The month-on-month changes are:

Month Feb Mar Apr May Jun
X, change +15 โˆ’5 +20 โˆ’5 +15
X, percent 37.5% โˆ’9.1% 40% โˆ’7.1% 23.1%
Y, change +15 +15 โˆ’5 +20 โˆ’5
Y, percent 50% 33.3% โˆ’8.3% 36.4% โˆ’6.7%

The largest absolute rise for X is in April (+20) and for Y in May (+20). But the largest percentage rise for Y was in February (50%), because it started from only 30. Always read whether the question asks "by how much" (absolute) or "by what percent".

A line graph joins values over time. Three things to read:

  • Height at a point is the value.
  • Slope between two points is the rate of change: a steeper segment is a faster rise. A line going down is a fall.
  • Crossing points are where two series are equal.

Comparing slopes is a quick way to answer "in which month was the increase highest?" without any arithmetic: find the steepest upward segment. But when the scale is not the same on both axes, or the axis does not start at zero, a steep slope can exaggerate a modest change. Try it below: the data are unchanged but the picture is not.

Line graph and axis start

When the axis starts at 30 the lines look much steeper, yet no number has changed. In the exam the axis is given, so always check its starting point before judging ratios from heights: a bar twice as tall only means "twice the value" if the axis starts at zero.

Speed tricks

  • Read only what you need. Many questions use two or three values. Do not tabulate the whole chart.
  • Estimate from heights when answer options are far apart. If one bar is about 1.5 times another, a ratio near 3 : 2 is likely.
  • Compare percent changes by fractions. Is 15/40 bigger than 20/55? Cross-multiply: 15 ร— 55 = 825 and 20 ร— 40 = 800, so 15/40 is larger.
  • Use gridlines. Count squares instead of guessing decimal values.
  • Stacked and double-axis charts. In a stacked bar, a segment's value is the difference of its two edges, not its top height. With two axes, check which axis each series uses.

Check your understanding

Use the data of Plants X and Y above.

Quick check ยท 5 questions

of 5 answered You scored / 5 ยท perfect!

  1. 1. What is the average monthly output of Plant X over the six months (in hundreds)?

    X totals 40 + 55 + 50 + 70 + 65 + 80 = 360, and 360 / 6 = 60.
  2. 2. By what percent did Plant Y's output grow from January to June?

    Y rose from 30 to 70, a change of 40 on a base of 30: 40 / 30 = 133.33%. The value 57.14% would use the wrong base (70).
  3. 3. In April, by what percent was X's output more than Y's?

    X = 70 and Y = 55, a difference of 15. 'X is more than Y' means the base is Y: 15 / 55 = 27.27%.
  4. 4. In which month did Plant Y have its largest percentage increase over the previous month?

    February: 15 / 30 = 50%. March was 15 / 45 = 33.3% and May was 20 / 55 = 36.4%. April was a fall.
  5. 5. A bar chart's vertical axis starts at 30. One bar is twice as tall as another. What does that mean?

    Because the bars begin at 30, their visible heights are value - 30. If the visible heights are in ratio 2 : 1, the real values are in a ratio smaller than 2 : 1.

Summary

  • Read title, scale, axis start, legend and units first; read the questions before the values.
  • Percent growth = (new โˆ’ old) รท old ร— 100; for "more than" comparisons the base is the thing being compared with.
  • The largest absolute change and the largest percent change are often different months.
  • On line graphs, slope is the rate of change; a truncated axis can exaggerate it.
  • Estimate from heights, compare fractions by cross-multiplying and extract only the values you need.

Next: Pie Charts and Mixed Data Sets, where parts of a whole are shown as angles.