Skip to content
Tutorials Center
My learning

Topics

Lesson 20 of 86 ยท Profit, Loss and Interest

Discount, Successive Discounts and Tax

Learn marked price, single and successive discounts, free-item offers, GST and VAT bills with worked examples and a runnable discount calculator.

Shops rarely sell at the price on the label. They offer a discount, then a second discount at the till, and finally the bill adds tax. Aptitude questions copy this exactly: a marked price, a chain of discounts, and sometimes a tax on top. The good news is that all of it is the multiplier method from Profit and Loss used repeatedly.

This lesson shows how to compute a selling price after one or several discounts, how to replace a chain of discounts with one equivalent discount, how to decode "buy two, get one free" offers, how to work out how much to mark an item up so that a discount still leaves a target profit, and how to read a bill with GST or VAT. You will also run a calculator that does all of this for any input.

Marked price and discount

  • Marked price (MP) or list price: the price printed on the label.
  • Discount: a reduction from the marked price, nearly always given as a percentage of MP.
  • Selling price (SP) = MP โˆ’ discount = MP ร— (100 โˆ’ d) รท 100.

The discount is a percent of the marked price, whereas profit is a percent of the cost price. Keep the two bases separate.

Example 1. A jacket is marked at 2,500 with a 12% discount. SP = 2,500 ร— 0.88 = 2,200.

Example 2. A shirt marked at 1,200 is sold for 960. The discount is 240, which is 240 รท 1,200 = 20% of the marked price.

flowchart LR
    CP["Cost price"] -->|"markup"| MP["Marked price"]
    MP -->|"discount"| SP["Selling price"]
    SP -->|"compare with CP"| R["Profit or loss"]

Markup is on cost; discount is on the marked price; profit compares the final price with cost.

Marking up so a discount leaves a profit

A common pattern: a shopkeeper wants a target profit after giving a discount. Let the cost price be 100 and work with multipliers.

Example 3. A shopkeeper allows a discount of 20% and still wants a profit of 10%. By how much percent above cost must he mark the goods? Suppose CP = 100. He needs SP = 110. SP = MP ร— 0.80, so MP = 110 รท 0.8 = 137.5. The markup is 37.5%.

The general relation is: MP ร— (1 โˆ’ d) = CP ร— (1 + p), so the markup factor is (1 + p) รท (1 โˆ’ d).

Example 4. If goods are marked 40% above cost and a 25% discount is allowed, the selling price is 1.40 ร— 0.75 = 1.05 of cost, a profit of 5%.

Successive discounts

When two discounts are given one after another, the second applies to the already-reduced price, so they do not add up. For discounts dโ‚ and dโ‚‚ (in percent), the single equivalent discount is:

d = dโ‚ + dโ‚‚ โˆ’ (dโ‚ ร— dโ‚‚) รท 100

Example 5. Successive discounts of 20% and 10%: d = 20 + 10 โˆ’ 2 = 28%, not 30%. Check with multipliers: 0.80 ร— 0.90 = 0.72, which is a 28% discount.

For three discounts, multiply the three multipliers.

Example 6. Discounts of 10%, 20% and 30%: 0.90 ร— 0.80 ร— 0.70 = 0.504, so the net discount is 49.6%.

The order of the discounts does not matter, because multiplication is commutative. You get the same final price whether you give 20% then 10%, or 10% then 20%.

Free-item offers as discounts

  • Buy 1, get 1 free: you pay for 1 out of 2 items, a discount of 50%.
  • Buy 2, get 1 free: you pay for 2 out of 3, a discount of 1/3, about 33.33%.
  • Buy 3, get 1 free: you pay for 3 out of 4, a discount of 25%.
  • Pay for 8, get 10: you pay for 8 out of 10, a discount of 20%.

In general, if you pay for m items and receive n items (n > m), the discount is (n โˆ’ m) รท n ร— 100 percent.

Example 7. Which is better for the shopper: successive discounts of 30% and 10%, or a single flat 38%? The successive pair is 30 + 10 โˆ’ 3 = 37%, so the flat 38% is better by one point.

Tax: GST and VAT

Sales taxes are added to the price as a percentage. Names and rates differ by country and by product, so the rate is always given in the question. Think of tax as another multiplier.

  • GST (goods and services tax) and VAT (value added tax): a bill's total = price before tax ร— (1 + tax rate รท 100).
  • Tax-inclusive price: if the shelf price already includes tax, the price before tax = inclusive price รท (1 + tax rate รท 100).

Example 8. A laptop bag is marked 1,000, a 10% discount is given, and GST of 18% is charged on the discounted price. Discounted price 900; GST 162; the bill is 1,062. Multiplier form: 1,000 ร— 0.90 ร— 1.18 = 1,062.

Example 9. A phone is sold for 11,800 including 18% GST. The price before tax is 11,800 รท 1.18 = 10,000, and the tax is 1,800.

Because both a discount and a tax are multipliers, applying tax before the discount gives the same bill as applying it after: 1.18 ร— 0.90 = 0.90 ร— 1.18. In real shops the law decides which price the tax applies to, but exam questions normally say.

How VAT works across a supply chain

VAT is charged at every stage, but each seller deducts the tax they have already paid, so the tax is effectively on the value added.

Example 10. A wholesaler buys goods for 100 and sells them to a retailer for 130, with 10% VAT. The wholesaler collects 13 and paid 10 on purchase, so he passes on a net 3 to the government, which is 10% of the value he added (30).

Try it: a bill calculator

This calculator takes a marked price, a list of successive discounts and a tax rate. It prints the price after each step and the single equivalent discount.

JS Discount and tax calculator

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Try it: free offers and markups

Convert "pay for m, get n" offers into a percent discount and find the markup needed for a target profit.

JS Offers and markups

Press Run (or Ctrl + Enter) to see the console output here.

No output.

Common mistakes

  • Adding discounts (20% + 10% = 30%). Use the multipliers or the formula dโ‚ + dโ‚‚ โˆ’ dโ‚dโ‚‚/100.
  • Taking a discount as a percent of the cost price instead of the marked price.
  • Computing "tax-inclusive" amounts by subtracting the tax percent: 11,800 less 18% is not 10,000. Divide by 1.18 instead.
  • Reading "buy 2 get 1 free" as 50% off. You pay for two of three, so it is one third off.

Check your understanding

Quick check ยท 5 questions

of 5 answered You scored / 5 ยท perfect!

  1. 1. An item marked at 4,000 is sold at successive discounts of 25% and 20%. What is the selling price?

    4000 x 0.75 x 0.80 = 2400. The single equivalent discount is 40%.
  2. 2. Which single discount equals successive discounts of 40% and 25%?

    0.60 x 0.75 = 0.45, so the net discount is 55%. Formula: 40 + 25 - (40 x 25)/100 = 55.
  3. 3. A shopkeeper marks goods 50% above cost and allows a discount of 20%. What is his profit percent?

    SP is 1.5 x 0.8 = 1.2 times cost, a profit of 20%.
  4. 4. A bill shows 2,360 including 18% GST. What was the price before tax?

    2360 / 1.18 = 2000. The tax is 360.
  5. 5. A shop offers 'buy 3, get 2 free' on pens. What is the equivalent percent discount?

    You pay for 3 pens and receive 5, so the discount is (5 - 3) / 5 = 40%.

Summary

  • Discount is a percent of the marked price; SP = MP ร— (1 โˆ’ d/100).
  • Successive discounts multiply: net d = dโ‚ + dโ‚‚ โˆ’ dโ‚dโ‚‚/100, and the order does not matter.
  • Pay m and get n items is a discount of (n โˆ’ m)/n.
  • To earn profit p after discount d, mark up by (1 + p)/(1 โˆ’ d) โˆ’ 1.
  • Tax is a multiplier; to remove it from an inclusive price, divide by (1 + rate).

Next: Simple Interest, where money earns a steady amount each year.