Skip to content
Tutorials Center
My learning

Topics

Lesson 25 of 39 · Work, Energy and Power

Work and the Work-Energy Theorem

Learn the physics definition of work, how angles and variable forces change it, and how the work-energy theorem connects net work to a change in speed.

Forces and Newton's laws are enough to solve many problems, but they can get messy when forces change as an object moves. A second way of thinking, based on work and energy, often makes such problems much easier. You trade vectors and accelerations for single numbers (scalars) that you can simply add.

In everyday speech, "work" means effort. In physics, work has a precise meaning: a force does work on an object when the object moves while the force acts on it. Holding a heavy box still makes your muscles tired, but you do no work on the box in the physics sense, because it does not move.

The definition of work

For a constant force F acting while an object moves through a displacement d:

W = F · d · cos θ

where θ is the angle between the force and the displacement. The unit of work is the joule (J): 1 J = 1 N·m = 1 kg·m²/s². One joule is the work done by a 1 N force over 1 m in the same direction.

Work is a scalar but it can be positive, negative or zero:

Angle θ cos θ Work Meaning
0° +1 F·d (largest) Force along the motion; speeds the object up
90° 0 zero Force perpendicular to motion; changes direction only
180° −1 −F·d Force opposes the motion; slows the object down

Examples of zero work: the normal force on a sliding block (perpendicular to the motion), and gravity on a satellite in a circular orbit (always perpendicular to its velocity). Friction typically does negative work.

Example 1: pulling a sled

You pull a sled with a rope at 30° above the horizontal with 50 N, over 10 m of level ground:

W = 50 × 10 × cos 30° = 500 × 0.8660 ≈ 433 J

Only the horizontal component F cos θ does work along the ground. The vertical part lifts a little but the sled does not move up, so it does no work.

Python Work at different angles

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Work by gravity

If an object of mass m rises by a height h, gravity does work −m·g·h (negative, because gravity points down while the object moves up). When it falls by h, gravity does +m·g·h. Only the vertical displacement counts, not the path. Lifting a 2 kg book 1.5 m takes at least 2 × 9.81 × 1.5 = 29.4 J of work by you.

Variable forces and the area under a graph

If the force changes during the motion, plot F (along the motion) against position x. The work is the area under the curve. For a spring, the force needed to stretch it is F = k·x, a straight line, so the work from 0 to x is the area of a triangle: W = ½ k x².

Python Work as area under a force graph

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The two answers should match at 40 J, since the area of a triangle with base 4 m and height 20 N is ½ × 4 × 20 = 40 J.

Net work and kinetic energy

Several forces can act on an object. The net work is the sum of the work done by each force (equivalently, the work done by the net force). Now take the second law, F_net = m·a, with a constant net force along a straight line. The motion equation v² = v₀² + 2·a·d gives a·d = (v² − v₀²)/2. Multiply by m:

F_net · d = ½ m v² − ½ m v₀²

The left side is the net work. The quantity ½ m v² is the kinetic energy KE. So:

W_net = KE_final − KE_initial = ΔKE

This is the work-energy theorem: the net work done on an object equals the change in its kinetic energy. It holds for variable forces and curved paths too.

Example 2: braking

A 1,200 kg car moves at 20 m/s and brakes to a stop with a constant braking force. Its initial kinetic energy is ½ × 1200 × 20² = 240,000 J. The final kinetic energy is zero, so the net work is −240,000 J. If the stopping distance is 40 m, the braking force is F = 240,000 / 40 = 6,000 N.

Because KE depends on v², doubling the speed requires four times the work to reach it, and four times the braking distance with the same force. That is why high speed is so dangerous.

Python Braking distance from the work-energy theorem

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

When a problem asks for a speed or a distance and does not ask for a time, try the work-energy theorem first. It avoids finding the acceleration.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A 20 N force pulls a box 3 m in the same direction as the force. How much work is done?

    W = F d cos 0° = 20 × 3 × 1 = 60 J.
  2. 2. A satellite moves in a circle. How much work does gravity do on it during one orbit?

    In a circular orbit the gravitational force is perpendicular to the velocity at every instant, so cos 90° = 0 and the work is zero.
  3. 3. The work-energy theorem states that...

    W_net = ΔKE = ½mv² − ½mv₀². Force times time gives impulse, which changes momentum.
  4. 4. A car's speed doubles. By what factor does its kinetic energy change?

    KE = ½mv² grows with the square of the speed, so doubling v gives four times the energy.

Summary

  • Work: W = F d cos θ; unit joule (1 J = 1 N·m). It is a scalar and can be negative.
  • Force perpendicular to the motion does no work.
  • For a variable force, work is the area under the force-position graph.
  • Kinetic energy: KE = ½ m v².
  • Work-energy theorem: W_net = ΔKE.

Next: Kinetic and Potential Energy