Skip to content
Tutorials Center
My learning

Topics

Lesson 15 of 39 ยท Motion in One Dimension

Motion Graphs in Practice

Read and sketch position, velocity and acceleration graphs, link slopes to areas, and build a three-graph plot from a journey with changing motion.

Graphs let you see motion at a glance. Three graphs describe one trip: position against time, velocity against time and acceleration against time. They are connected by two simple operations: slope goes from position to velocity to acceleration, and area goes backwards. Mastering this link is one of the most useful skills in kinematics.

The slope and area rules

Graph Slope gives Area under graph gives
x-t velocity (nothing standard)
v-t acceleration displacement
a-t (jerk, rarely used) change in velocity

An area below the time axis counts as negative. So for displacement, you add areas above the axis and subtract areas below.

Reading a journey

Imagine a lift (elevator) going from the ground floor up and back. Describe each phase:

  1. Speeding up from rest: v rises, a > 0.
  2. Cruising at constant velocity: v flat, a = 0.
  3. Slowing down to stop: v falls, a < 0.

The x-t graph curves upward in phase 1 (slope increasing), is a straight line in phase 2 and flattens in phase 3.

From graph to graph

Slope of x-t velocity
Slope of v-t acceleration
1 / 2

Building the three graphs from one trip

Let the trip be: accelerate at +2 m/sยฒ for 5 s, cruise for 10 s, brake at โˆ’2.5 m/sยฒ until stopped. Compute the velocity: it reaches 10 m/s after 5 s. Braking from 10 m/s at 2.5 m/sยฒ takes 4 s.

Distances:

  • Phase 1: ยฝ ร— 2 ร— 5ยฒ = 25 m.
  • Phase 2: 10 ร— 10 = 100 m.
  • Phase 3: 10 ร— 4 โˆ’ ยฝ ร— 2.5 ร— 4ยฒ = 40 โˆ’ 20 = 20 m.

Total 145 m. The area under the v-t graph (a trapezoid) agrees: the long side is the full 19 s, the short side the 10 s cruise, height 10 m/s: ยฝ (19 + 10) ร— 10 = 145 m.

Python Three linked graphs

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Estimating area from a table

When a graph is given as data points, you can estimate displacement by adding up many thin rectangles or trapezoids. NumPy's trapezoid function does this.

Python Displacement as area under v-t

Press Run (or Ctrl + Enter) to see the result here.

Program input ยท what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

When a question asks "how far", look for an area. When it asks "how fast is it accelerating", look for a slope.

Common graph mistakes

  • Reading the height of a v-t graph as acceleration. Height is velocity; slope is acceleration.
  • Treating a downward-sloping x-t graph as slowing down. It means negative velocity.
  • Forgetting that a graph crossing the time axis means a change in direction (v-t) or passing the origin (x-t).

Check your understanding

Quick check ยท 4 questions

of 4 answered You scored / 4 ยท perfect!

  1. 1. On a v-t graph, a straight line sloping upward from the origin shows

    A constant positive slope means a constant positive acceleration.
  2. 2. The area under a v-t graph equals

    Velocity times time is displacement, so area on v-t gives displacement.
  3. 3. An object moves at 4 m/s for 6 s. What is its displacement from the v-t area?

    A rectangle of height 4 m/s and width 6 s has area 24 m.
  4. 4. A downward-sloping straight line on an x-t graph shows

    Slope is velocity, so a downward slope means negative velocity.

Summary

  • Slope of x-t is velocity; slope of v-t is acceleration.
  • Area under v-t is displacement; area under a-t is change in velocity.
  • Areas below the axis count as negative.
  • Build a trip graph phase by phase, checking totals with the area.

Next: Position and Velocity in Two Dimensions