Skip to content
Tutorials Center
My learning

Topics

Lesson 37 of 39 · Projects and Practice

Practice Set: Forces and Energy

Eight worked practice problems on Newton's laws, friction, ramps, work, energy conservation, power and efficiency, with full answers and Python checks.

Reading about physics is not the same as doing physics. This practice set pulls together Chapters 5 and 6: Newton's laws, friction, work, energy, power and efficiency. Try each problem on paper first. Draw a free-body diagram for every force problem, write the equation, and only then look at the answers further down. Use g = 9.81 m/s².

Solve in symbols first and put numbers in at the end. Check the units of your result: newtons for force, joules for energy, watts for power, m/s for speed.

The problems

Problem 1. A net force of 15 N acts on a 3.0 kg cart. Find its acceleration.

Problem 2. A 5.0 kg block on a level floor is pushed by a horizontal 40 N force. The coefficient of kinetic friction is 0.30. Find the acceleration.

Problem 3. A 800 kg elevator car accelerates upward at 1.5 m/s². Find the tension in the cable.

Problem 4. A box slides down a frictionless ramp inclined at 25° to the horizontal. Find its acceleration.

Problem 5. A force of 80 N acts at 60° to the direction of motion and moves an object 12 m. How much work does it do?

Problem 6. A roller-coaster car starts from rest at the top of a hill 20 m above the lowest point. Ignoring friction, what is its speed at the lowest point?

Problem 7. A motor lifts a 50 kg crate 12 m in 20 s at constant speed. What power does it deliver to the crate?

Problem 8. The motor in Problem 7 draws 500 W of electrical power. What is its efficiency?

Check your work with code

The first program computes every answer. Run it only after you have your own numbers.

Python Answer checker, problems 1 to 4

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Python Answer checker, problems 5 to 8

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Answers and key steps

  1. a = F/m = 15/3.0 = 5.0 m/s².
  2. N = mg = 49.05 N; friction = 0.30 × 49.05 = 14.7 N; a = (40 − 14.7)/5.0 ≈ 5.06 m/s².
  3. T − mg = ma, so T = 800 × (9.81 + 1.5) = 9,048 N, about 9.0 kN. (At rest the tension would be 7,848 N.)
  4. a = g sin 25° = 9.81 × 0.4226 ≈ 4.15 m/s². The mass cancels.
  5. W = F d cos θ = 80 × 12 × 0.5 = 480 J.
  6. v = √(2gh) = √(392.4) ≈ 19.8 m/s, about 71 km/h.
  7. At constant speed the work done equals the gain in PE: m g h = 50 × 9.81 × 12 = 5,886 J. Power = 5,886 / 20 ≈ 294 W. (Equivalently, P = F v with F = mg and v = 12/20 = 0.6 m/s.)
  8. Efficiency = 294.3 / 500 ≈ 0.589, about 59%.

A multi-step problem to try next

A 2.0 kg block starts from rest at the top of a rough ramp 3.0 m long, inclined at 30°. The coefficient of kinetic friction is 0.20. Find (a) the acceleration, (b) the speed at the bottom using kinematics, and (c) the same speed using the work-energy theorem.

(a) a = g (sin 30° − 0.20 cos 30°) = 9.81 × (0.5 − 0.1732) = 3.206 m/s². (b) v² = 2 a d = 2 × 3.206 × 3.0 = 19.24, so v ≈ 4.39 m/s. (c) The vertical drop is 3.0 × sin 30° = 1.5 m. The gain in KE equals the gravity work minus the friction work: m g h − μ m g cos θ × d = 2.0 × 9.81 × 1.5 − 0.20 × 2.0 × 9.81 × 0.866 × 3.0 = 29.43 − 10.19 = 19.24 J, then v = √(2 × 19.24 / 2.0) ≈ 4.39 m/s. Both routes agree, which is a good sign.

Python Two methods, one answer

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Strategy checklist

  • Force or acceleration asked: use ΣF = ma after a free-body diagram.
  • Speed at a position, no time asked: try energy first.
  • Time, or what happens at each instant: use Newton's second law and kinematics.
  • Friction present: remember f = μN, and that N may not equal mg on a slope or with an angled pull.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A 4 kg block is pulled by a net force of 20 N. Its acceleration is...

    a = F/m = 20/4 = 5 m/s².
  2. 2. A force of 50 N moves an object 4 m at 90° to the displacement. The work done is...

    cos 90° = 0, so no work is done.
  3. 3. A frictionless slide drops 5.0 m. What speed does a child reach at the bottom, from rest?

    v = √(2gh) = √98.1 ≈ 9.9 m/s.
  4. 4. A device has 300 W input and 240 W useful output. Its efficiency is...

    240/300 = 0.80, i.e. 80%.

Summary

  • Draw the free-body diagram, choose axes, apply ΣF = ma.
  • On slopes use N = mg cos θ and a = g(sin θ − μ cos θ).
  • Work: W = F d cos θ; work-energy: W_net = ΔKE; frictionless drop: v = √(2gh).
  • Power P = W/t = Fv; efficiency is useful output over input.
  • Solving the same problem two ways is the best check.

Next: Practice Set: Momentum, Circular Motion and Gravity