Skip to content
Tutorials Center
My learning

Topics

Lesson 27 of 39 · Work, Energy and Power

Conservation of Energy

Use conservation of mechanical energy to find speeds on slides, pendulums and springs, and see how friction turns mechanical energy into thermal energy.

One of the deepest ideas in physics is that energy is conserved: it can change form and move from place to place, but the total amount in an isolated system stays the same. You never create or destroy energy, you only convert it.

In mechanics we use a special case. If only conservative forces (like gravity and ideal springs) do work, the mechanical energy E = KE + PE stays constant:

KE₁ + PE₁ = KE₂ + PE₂

This gives you a tool that skips the details of the path. You do not need to know the shape of a roller coaster track; only the heights and the speeds at two points.

Strategy

  1. Choose two moments: the start (1) and the end (2).
  2. Choose a zero level for potential energy (often the lowest point).
  3. Write KE + PE at each moment, using ½mv², mgh and, if there is a spring, ½kx².
  4. Set them equal, and solve. The mass often cancels.

Example 1: a falling ball

A ball is dropped from 5.0 m. How fast is it moving just before it lands (ignore air resistance)?

Start: KE₁ = 0, PE₁ = m g (5.0). End: PE₂ = 0, KE₂ = ½ m v². So ½ m v² = m g h, and the mass cancels:

v = √(2 g h) = √(2 × 9.81 × 5.0) = √98.1 ≈ 9.9 m/s

This is the same answer you get from the kinematics equations, but quicker. It also shows something general: the speed at the bottom of a frictionless slide depends only on the vertical drop, not on the shape of the slide.

Python Energy while falling

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

The total column stays at 2 × 9.81 × 5 = 98.1 J while kinetic and potential energy trade places.

Example 2: a pendulum

A pendulum bob is pulled aside until it is 0.20 m higher than its lowest point, then released. The string tension does no work (it is always perpendicular to the motion), so mechanical energy is conserved. At the lowest point: v = √(2 g h) = √(2 × 9.81 × 0.20) = √3.924 ≈ 1.98 m/s. Again, the mass and the string length do not matter, only the height difference.

Example 3: a spring launcher

A spring with k = 400 N/m is compressed 0.10 m and launches a 0.10 kg ball horizontally on a frictionless surface. Spring energy: ½ × 400 × 0.01 = 2.0 J. All of it becomes kinetic: ½ × 0.10 × v² = 2.0, so v² = 40 and v ≈ 6.3 m/s.

Python Roller coaster speeds

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Multiplying m/s by 3.6 gives km/h. Real roller coasters lose some energy to friction and air, so real speeds are a bit lower.

When friction acts

Friction and air resistance are non-conservative: they convert mechanical energy to thermal energy (and a bit of sound). The mechanical energy is no longer constant, but the total energy still is. We account for the loss as the work done by friction:

KE₁ + PE₁ + W_nc = KE₂ + PE₂

where W_nc is the work done by non-conservative forces (negative for friction), or equivalently KE₂ + PE₂ = KE₁ + PE₁ − |W_friction|.

Example 4. A 5.0 kg block slides from rest down a rough ramp that drops 2.0 m. A constant friction force of 10 N acts along a ramp length of 5.0 m. How fast is the block at the bottom?

  • Initial energy: m g h = 5.0 × 9.81 × 2.0 = 98.1 J.
  • Work lost to friction: 10 × 5.0 = 50 J.
  • Final KE: 98.1 − 50 = 48.1 J, so v = √(2 × 48.1 / 5.0) = √19.24 ≈ 4.39 m/s.

Without friction, the speed would be √(2 × 9.81 × 2.0) ≈ 6.26 m/s.

Python Sliding with friction

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Energy conservation tells you speeds at positions, not times or forces. It also cannot tell you the direction of motion. If a problem needs a time or a force, go back to Newton's second law.

flowchart LR
    A["Start: KE1 + PE1"] --> B["Subtract work lost to friction"]
    B --> C["End: KE2 + PE2"]

Energy accounting with friction. Nothing disappears: the lost mechanical energy becomes thermal energy.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. A ball is dropped from 5.0 m. Ignoring air, its speed just before impact is about...

    v = √(2gh) = √(2 × 9.81 × 5.0) ≈ 9.9 m/s.
  2. 2. Two frictionless slides have the same height but different shapes. A child slides down each from rest. At the bottom...

    Only the vertical drop matters when energy is conserved: v = √(2gh).
  3. 3. What happens to the mechanical energy lost to friction?

    Total energy is conserved. Friction turns mechanical energy into thermal energy (and a little sound).
  4. 4. A 0.10 kg ball is launched by a spring storing 2.0 J. Its speed is...

    ½mv² = 2.0 gives v² = 40, so v ≈ 6.3 m/s.

Summary

  • Energy is conserved; it only changes form or location.
  • With only conservative forces, KE + PE is constant.
  • Speed at a point on a frictionless path depends only on the height drop: v = √(2gh).
  • With friction, subtract the work lost: KE₂ + PE₂ = KE₁ + PE₁ − |W_friction|.
  • Energy methods give speeds, not times; use Newton's laws for those.

Next: Power and Efficiency