Skip to content
Tutorials Center
My learning

Topics

Lesson 20 of 39 · Forces and Newton's Laws

Forces and Free-Body Diagrams

Learn what a force is, meet weight, normal force, tension and friction, and draw free-body diagrams that turn any mechanics problem into clear equations.

So far you have described motion: where something is, how fast it goes and how its velocity changes. Now we ask the deeper question: why does an object move the way it does? The answer is forces. A force is a push or a pull that one object exerts on another. Forces can start a motion, stop it, speed it up, slow it down or bend its path.

Forces are vectors. They have a size and a direction, so you add them the way you added vectors in the earlier chapters. The SI unit of force is the newton (symbol N). One newton is the force that gives a 1 kg mass an acceleration of 1 m/s², so 1 N = 1 kg·m/s². A small apple weighs about 1 N on Earth.

In this lesson you will meet the common forces and learn the single most useful skill in mechanics: drawing a free-body diagram.

Contact forces and field forces

Forces fall into two families.

  • Contact forces act where two objects touch: a push from your hand, the tension in a rope, the normal force from a table, friction, air resistance.
  • Field forces act across empty space: gravity, and also electric and magnetic forces.

Here are the forces you will meet most often.

Force Symbol Direction Notes
Weight W or Fg Straight down, toward Earth's center W = m·g
Normal force N Perpendicular to the surface, away from it A surface pushes back; it is not always equal to the weight
Tension T Along the rope or string, pulling on the object An ideal light rope carries the same tension everywhere
Friction f Parallel to the surface, opposing sliding Covered in a later lesson
Applied force F Whatever direction you push or pull A hand, a motor, a wind
Air resistance (drag) D Opposite to the motion through the air Often ignored in basic problems

Mass versus weight

Mass is how much matter an object has, measured in kilograms. It is the same everywhere. Weight is the gravitational force on the object, measured in newtons. Near Earth's surface:

W = m·g, with g ≈ 9.81 m/s²

A 60 kg person weighs 60 × 9.81 = 588.6 N. On the Moon, where g ≈ 1.62 m/s², the same person has the same mass but weighs only about 97 N. People often say "I weigh 60 kilograms" in daily life. In physics we call that the mass.

Python Weight on different worlds

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Adding forces: the net force

When several forces act on an object, only their vector sum matters. We call it the net force (or resultant): F_net = ΣF. Split each force into x and y components, add all the x parts, add all the y parts, then rebuild the result if you need its size and direction.

For a force F at an angle θ above the +x axis:

Text
Fx = F cos θ
Fy = F sin θ
Python Net force from components

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Here the 30 N and 10 N forces point opposite ways along x, leaving 20 N toward +x. Together with the 20 N upward force, the net force is √(20² + 20²) ≈ 28.3 N at 45°.

What is a free-body diagram?

A free-body diagram (FBD) is a simple sketch that shows one object, drawn as a dot or a box, and every force acting on that object as an arrow starting at the object. It leaves out everything else: the ground, the rope, the hand. Those only matter through the forces they exert.

Follow these steps:

  1. Choose the object (the "system") you want to analyze.
  2. Draw it as a dot or a simple box.
  3. List the forces on it. Start with weight, then ask: what touches the object? Each contact may give a normal force, tension or friction.
  4. Draw each force as an arrow from the object, pointing the way the force pushes or pulls. Longer arrows mean bigger forces.
  5. Label every arrow (W, N, T, f).
  6. Choose axes that make the math easy, then break any slanted forces into components.
flowchart TD
    A["Box at rest on a table"] --> B["Weight W: down"]
    A --> C["Normal force N: up"]
    B --> D["Net force = N - W"]
    C --> D
    D --> E["At rest: N = W"]

The two forces on a resting box. Both are drawn on the box; they are not an action-reaction pair (that idea comes in Newton's third law).

Draw only forces on the object, never forces the object exerts on others. Do not draw "velocity" or "acceleration" arrows in the same diagram as forces. They are not forces. A common mistake is to add a "force of motion" arrow. No such force exists.

Worked example: a crate pulled by a rope

A 20 kg crate is pulled along a floor by a rope that makes an angle of 30° above the horizontal. The pull is 80 N.

Forces on the crate: weight W = 20 × 9.81 = 196.2 N down; tension T = 80 N at 30° above horizontal; normal force N up; friction opposing the motion.

Components of the tension:

  • Horizontal: 80 × cos 30° ≈ 69.3 N
  • Vertical: 80 × sin 30° = 40 N (up)

Because the crate does not jump off the floor or sink into it, the vertical forces balance: N + 40 = 196.2, so N = 156.2 N. Notice that the normal force is less than the weight, because the rope helps lift the crate. This is a classic example of why you cannot always assume N = mg.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. Which unit is used for force in the SI system?

    The newton (N) is the SI unit of force, equal to 1 kg·m/s². The joule measures energy and the watt measures power.
  2. 2. A 10 kg mass is taken from Earth to the Moon. What happens?

    Mass is the amount of matter and does not change. Weight is m·g, and the Moon's g is much smaller than Earth's.
  3. 3. A book rests on a table. Which forces belong on the book's free-body diagram?

    Only forces acting on the book count: its weight and the table's normal force. There is no force of motion, and the book's push on the table acts on the table.
  4. 4. A rope pulls a crate with 80 N at 30° above horizontal. What is the horizontal component?

    Fx = 80 cos 30° = 80 × 0.866 ≈ 69.3 N. The 40 N is the vertical component.

Summary

  • A force is a push or a pull; it is a vector measured in newtons (1 N = 1 kg·m/s²).
  • Weight W = m·g is a force; mass is the amount of matter and does not change with place.
  • The net force is the vector sum of all forces; add components separately.
  • A free-body diagram shows one object and only the forces acting on it.
  • The normal force is whatever the surface needs to provide; it is not always equal to the weight.

Next: Newton's First Law and Equilibrium