Skip to content
Tutorials Center
My learning

Topics

Lesson 7 of 39 · Measurement, Units and Vectors

Significant Figures and Uncertainty

Learn how to count significant figures, round results correctly, and express measurement uncertainty as absolute and percentage values in physics.

A ruler marked in millimeters cannot honestly give a length to the nearest micrometer. The number of digits you write should reflect how well you measured. Significant figures (sig figs) are the digits in a number that carry meaning. Uncertainty states directly how far a measurement might be from the true value.

Counting significant figures

Rules for counting:

  1. All non-zero digits count: 4.62 has 3.
  2. Zeros between non-zero digits count: 3005 has 4.
  3. Leading zeros never count: 0.0042 has 2.
  4. Trailing zeros count if there is a decimal point: 2.50 has 3, 120. has 3.
  5. Trailing zeros in a number without a decimal point are ambiguous: 1500 could have 2, 3 or 4. Use scientific notation to be clear: 1.5 × 10³ (2), 1.50 × 10³ (3).
  6. Exact numbers (counting 12 eggs, or the 2 in 2πr, or definitions like 100 cm = 1 m) have unlimited sig figs.
Number Sig figs
507 3
0.00830 3
6.0 × 10⁴ 2
100.0 4
0.0100 3
Python Count significant figures

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Rounding in calculations

Two common rules:

  • Multiplying or dividing: the answer has as many sig figs as the factor with the fewest sig figs.
  • Adding or subtracting: the answer has as many decimal places as the term with the fewest decimal places.

Example: 4.56 m × 1.4 m = 6.384 m², rounded to 2 sig figs gives 6.4 m². Example: 12.11 m + 0.3 m = 12.41 m, and the least precise term has one decimal place, so the answer is 12.4 m.

Keep extra digits in the middle of a long calculation and round only the final answer. Rounding early adds avoidable error.

Python Round to a number of significant figures

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Absolute and percentage uncertainty

A reading of L = 24.3 cm ± 0.1 cm says the true length is probably between 24.2 and 24.4 cm.

  • Absolute uncertainty: ΔL = 0.1 cm, in the same unit.
  • Fractional uncertainty: ΔL / L = 0.1 / 24.3 ≈ 0.004.
  • Percentage uncertainty: 0.004 × 100 ≈ 0.4 %.

For a single reading with a ruler, a common convention is to take half the smallest division as the reading uncertainty, though some courses use the full division. For a digital instrument, the last displayed digit is a reasonable choice. Follow the rule your course specifies.

Combining uncertainties

A common simple rule set (used in many school courses):

Operation Rule
a + b or a − b add the absolute uncertainties
a × b or a / b add the percentage uncertainties
aⁿ multiply the percentage uncertainty by n

This overestimates a little compared with the statistical treatment at university, but it is safe and quick.

Example: a rectangle measures 5.0 ± 0.1 cm by 2.0 ± 0.1 cm. Percentage uncertainties: 2 % and 5 %. Area = 10.0 cm², uncertainty 7 %, so 10.0 ± 0.7 cm².

Python Propagate uncertainty in an area

Press Run (or Ctrl + Enter) to see the result here.

Program input · what you'd type while the program runs

Type the answers before you press Run, one per line. Each time the program reads a line (with input()), it gets the next line from this box.

Accuracy and precision

  • Accurate: close to the true value.
  • Precise: repeated readings agree with each other.

A broken scale that always reads 0.5 kg too high is precise but not accurate. That consistent offset is a systematic error. Scatter from reaction time is a random error, reduced by averaging.

Check your understanding

Quick check · 4 questions

of 4 answered You scored / 4 · perfect!

  1. 1. How many significant figures does 0.00420 have?

    Leading zeros do not count. The digits 4, 2 and the trailing 0 count.
  2. 2. 3.2 m × 1.25 m should be quoted with how many sig figs?

    3.2 has 2 sig figs, the fewest, so the product keeps 2: 4.0 m².
  3. 3. A length is 40.0 cm ± 0.4 cm. What is the percentage uncertainty?

    0.4 / 40.0 = 0.01, which is 1 %.
  4. 4. A scale that always reads 0.5 kg too high has

    A consistent offset is a systematic error.

Summary

  • Significant figures show how well a quantity is known; leading zeros do not count.
  • Multiplication keeps the fewest sig figs; addition keeps the fewest decimal places.
  • Uncertainty can be absolute (±) or percentage; percentages add when multiplying or dividing.
  • Systematic errors shift results; random errors scatter them.

Next: Scalars and Vectors